Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Ultra Sonic cleaning  (Read 5787 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Ultra Sonic cleaning
« on: June 19, 2015, 02:02:22 PM »

I have a feeling this was covered a while ago but i can't find the relevant post so I may be imagining it.
I have a cheap model ultrasonic cleaner but it is next to useless. It just seems to rearrange the muck from one place to another on reed plates.  I think it cost about £25 (in the UK). Anyone out there recommend a slightly more expensive and effective model or perhaps offer advice on what I'm doing wrong? My father used to repair clocks and I know he had an amazing US cleaner that was very effective.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Ultra Sonic cleaning
« Reply #1 on: June 19, 2015, 02:14:25 PM »

Before you spend another lump of money what cleaning solution are you using, and at what temperature?  Both critically important.  If there is a trace of wax still to be removed the solution needs to be hot enough to melt or at least soften the wax, something like 80C.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Ultra Sonic cleaning
« Reply #2 on: June 19, 2015, 09:58:42 PM »

Ah. Well I've tried it a couple of times with hot water from the tap and a few drops of detergent. So maybe the water should be much hotter. What cleaning fluid do you suggest?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Ultra Sonic cleaning
« Reply #3 on: June 20, 2015, 12:29:31 AM »

There are special cleaning solutions for ultrasonic baths.  You need one suitable for "sensitive metals" aluminium and zinc can be damaged by the more aggressive solutions.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Ultra Sonic cleaning
« Reply #4 on: June 21, 2015, 12:53:20 AM »

Beware of using caustic soda, it will shift wax but can erode aluminium, washing soda is tamer but avoid long soak times.

Brake cleaning fluid is a pretty comprehensive solvent (it is IIRC a replacement for carbon tet) but having only recently discovered it have yet to try what it does with old wax / valve adhesive.

Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Ultra Sonic cleaning
« Reply #5 on: June 21, 2015, 06:56:37 AM »

In my younger days I was a Diamond cutter, yes really. We used  Xylol / Xylene for all ultrasonic cleaning . It's used cold and dissolves wax and all sorts of gunk. It's well worth looking up.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Ultra Sonic cleaning
« Reply #6 on: June 21, 2015, 07:48:02 AM »

Hi all,

So maybe the little bath is OK, but I need to try out some of the cleaning solution suggested. I'll report back.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Ultra Sonic cleaning
« Reply #7 on: June 21, 2015, 08:03:13 AM »

Xylene does not affect metals, we used to take the backs off our watches and dunk em in. Probably how so called watchmakers clean yours and charge a fortune. Make sure you let us know how you get on Rog.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Ultra Sonic cleaning
« Reply #8 on: June 21, 2015, 08:25:26 AM »

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Ultra Sonic cleaning
« Reply #9 on: June 21, 2015, 09:41:54 AM »

Wow!, just goes to show what we didn't know in the sixties, but it didn't affect me.......hehehehehe... Ugh. :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ultra Sonic cleaning
« Reply #10 on: June 21, 2015, 10:14:21 AM »

We used to ue Xylene especially when making classic slide preps of biological sections, as said, Xylene dissolves the wax the specimen was fixed in to allow microtome sectioning ( incredibly fine slicing with a blade unbelievably sharp).
Time has indeed moved on and Xylene is recognised to be not very nice, as Lester's link shows.

Sigma, a chemical supplier I use has a significant word as 'Danger'.
Fisher, another large chemical supplier has an overview warning against inhalation, skin or eye contact, all giving harmful effects.
Look up 'Xylene safety Data sheets' for explicit details.

Unless used in a lab condition in a fume cupboard and with personal protective equipment, I would no longer go near it.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ultra Sonic cleaning
« Reply #11 on: June 21, 2015, 10:19:07 AM »

ps.... Roger, hot tap water is ( or should be ) at best no more than 60C
Going back to Theo's original point, try boiling water maybe?
It's a damn sight better than using horrible solvents or chemicals that can affect the metals.

Another thought - a quick wipe with nail varnish remover, essentially acetone, is another reasonable method for degreasing.
As it is used for removing nail varnish it has a less agressive effect on you.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Ultra Sonic cleaning
« Reply #12 on: June 21, 2015, 10:24:21 AM »

Yes, all sorts of chemicals that we used with gay abandon to clean all sorts are now recognised as nasty to both people and environment. 
Somebody I knew who took a very cavalier view of safety with these things ended up with kidney cancer and didn't make it, so I take a different view these days. 
I was given a small ultrasonic bath.  The cleaner is a bit vague about use with metals, so I will follow Theo's advice and seek out a more suitable product.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Ultra Sonic cleaning
« Reply #13 on: June 21, 2015, 10:26:42 AM »

« Last Edit: June 21, 2015, 10:30:33 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Ultra Sonic cleaning
« Reply #14 on: June 21, 2015, 11:23:12 AM »

This firm have a wide range, some suitable for aluminium and zinc (sensitive metals that react badly to acids and alkalis) http://www.allendale-ultrasonics.co.uk/cleaning-solutions-rapidex-doctor-hospital.html?type_product=919.allendale-b.co.uk/cleaning-solutions-rapidex-doctor-hospital.html?type_product=919
I've used the Sensitive Metals solution in my heated ultrasonic cleaner on a number of things, including reeds/plates, and it works well enough. Plates and reeds which were absolutely encrusted with dirt and rust come out gleaming or back to the blued colour.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Ultra Sonic cleaning
« Reply #15 on: June 21, 2015, 11:26:44 AM »

You used to be able to buy mug heating elements to boil water for tea in a mug. Probably fallen foul of elf n safety now though.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Ultra Sonic cleaning
« Reply #16 on: June 21, 2015, 11:28:07 AM »

Maybe not still available on Amazon

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Ultra Sonic cleaning
« Reply #17 on: June 22, 2015, 12:46:08 AM »

Another thought - a quick wipe with nail varnish remover, essentially acetone, is another reasonable method for degreasing.
As it is used for removing nail varnish it has a less agressive effect on you.

True Q but these often contain things for moisturising, found my other halfs glued findings on jewellery failures was as a result of the degreasing actually leaving a grease layer, not a problem if waxing and may even have a mild corrosion inhibiting action but avoid if degreasing needs to be just that.

Still trying to come to terms with my new mental image of N C-B Diamond Geezer  ;D
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Ultra Sonic cleaning
« Reply #18 on: June 22, 2015, 01:32:39 AM »

I used Blitz Gem & Jewelry Cleaner from USA (It is available on UK Amazon too). It worked fine in the bath to remove the residual traces of wax from the reeds. It also removed my sharpie markings  :-[ Good job I have a tuner on my phone! As it is diluted with water I dried the reeds on top of the stove for an hour.

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Ultra Sonic cleaning
« Reply #19 on: June 22, 2015, 06:39:46 AM »

Quote from: Thrupenny Bit link=topic=17069.msg209277#msg209277 date=1434878347

Still trying to come to terms with my new mental image of N C-B Diamond Geezer  ;D
[/quote

 8) ;)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal