Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Ultra Sonic cleaning  (Read 5795 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ultra Sonic cleaning
« Reply #20 on: June 22, 2015, 08:08:18 AM »

Broadland Boy  - yes they often put in things like aromatic alcohols to make them smell nice, giving a 'pear drops' type smells to mask the strong acetone smell. I wasn't sure how they'd affect the degreasing.

Nick - Diamond Geezer? - Blimey that's a thought   ;D
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Ultra Sonic cleaning
« Reply #21 on: June 22, 2015, 02:27:00 PM »

Right. Thanks for all the great advice and links. I might give the Xylene a miss  ;D.  I have just ordered some cleaning solution and will try it with hotter water. I'll conduct some tests and get back to you.
« Last Edit: June 22, 2015, 02:31:05 PM by RogerThomas »
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Ultra Sonic cleaning
« Reply #22 on: June 22, 2015, 11:05:30 PM »

Fair dues Q, have since recalled it may originally have been something Theo said which put me on the trail of the NPR adding oil.

I use one of the cheap and nasty ultrasonic tanks in the workshop, most recent job was gradually putting a couple of buckets of nuts and bolts etc which had been submerged in trays which filled with leafmould and rainwater (collapsed shed roof, don't ask) using either paraffin (kerosene for our USA bretheren) or red diesel, depending on the rusting level, everything cleaned and recovered OK and amazingly the appalling abuse didn't kill the transducer.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Ultra Sonic cleaning
« Reply #23 on: August 10, 2015, 06:10:46 PM »

Before you spend another lump of money what cleaning solution are you using, and at what temperature?  Both critically important.  If there is a trace of wax still to be removed the solution needs to be hot enough to melt or at least soften the wax, something like 80C.

I missed this at first, it really is critical to have the water just shy of boiling, the plates come out bright and shiny and any residual wax/glue is easily scraped off with a rag.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Ultra Sonic cleaning
« Reply #24 on: September 04, 2015, 12:20:26 PM »

Just reporting back on the results. I used Allendale-Ultrasonics 'Sensitive Metals Ultrasonic Cleaning Solution' in near hot (80C +) water in my cheapo ultrasound cleaner and the results were *very* impressive. The manky looking reeds from a 1930s Hohner come out looking brand new (well almost).
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal