Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Problem with valve(?)  (Read 965 times)

0 Members and 1 Guest are viewing this topic.

Pequod

  • Member
  • *
  • Offline Offline
  • Posts: 29
Problem with valve(?)
« on: June 25, 2015, 02:58:39 PM »

Hello all, I would like to ask for your advice on a problem I have on my accordion (Hohner Pokerwork G/C).

Some weeks ago, I noticed that a specific note, the A note, was fading. It was like this: when I picked up the instrument it didn't sound at all, after pull the bellow for some time, it started to sound, and then everything was ok.

Yesterday I opened the box, and looked at the reeds of this note. I noticed the valve (?) was glued to the reed plate, then I released it and noticed it was a bit dirty, as you can see on the photo (I hope you can see the photo, I uploaded to the attach). Well, I know nothing about repairing boxes, but I imagine that the problem was that. Am I right? After I closed the box, the note sounded normal, but after a few time I felt it would start again to fade.

How can I solve this? Clean the valve? And what is the approach to do this?

Thank you in advance!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Problem with valve(?)
« Reply #1 on: June 25, 2015, 03:38:17 PM »

There is some contamination on the valve, if it is sticky then it will produce the symptoms you describe. I've successfully cleaned this sort of contamination with alcohol on a cotton wool bud. Most important thing is to avoid creasing the valve.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pequod

  • Member
  • *
  • Offline Offline
  • Posts: 29
Re: Problem with valve(?)
« Reply #2 on: June 25, 2015, 05:41:25 PM »

Theo, thank you very much for your comment.

I already thought about cotton wool bud with alchool. I will try that, without ruining the valve:)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Problem with valve(?)
« Reply #3 on: June 25, 2015, 06:40:47 PM »

And don't forget to swab the metal that the valve lies on, it will be sticky too.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal