Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Bellows Manufacture  (Read 10192 times)

0 Members and 1 Guest are viewing this topic.

HallelujahAl

  • Guest
Bellows Manufacture
« on: May 13, 2009, 07:01:42 PM »

Hi - I've decided to try my hand at making a new set of bellows for one of my boxes. I've made a lot of sets of bellows for Concertinas (both six & eight sided - and with varying numbers of folds - from 5 through to 8 folds usually) and have made my own jigs for this. But now my thoughts are turning to melodeons. And I've a couple of questions.

1. When I make my concertina bellows I use strips of cards hinged together with cloth tape and leather. Most accordion bellows that I've looked at appear to be just a continuous folded card. Are there any manufacturers using hinged cards - it would make my process considerably easier to do it that way. So what are your thoughts about using hinged card?

2. Are metal bellows corners necessary?

3. What glue do you recommend for attaching the the leather gussets to the bellows?

4. Does any one manufacturer produce a 'better' set of bellows than the rest?

There's bound to be a whole load of more questions - but that'll do for starters.
AL ;D
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Bellows Manufacture
« Reply #1 on: May 21, 2009, 06:32:38 AM »

Book binders glue

Metal corners a must with the current (archaic) tecnology

Buy pre folded bellows stock from Frank Romano in Montreal Canada
or an Italian supplier
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bellows Manufacture
« Reply #2 on: April 09, 2012, 06:55:29 PM »

What kind of PVA glue is best for bellows papers and, possibly, the leather diamonds? I've been using a PVA that's designed for books, it's what I was able to find at my local art store. I've glued the leather diamonds on my bellows but have had problems with the glue drying too fast. Diatonix mentioned he works with about 10 diamonds at a time and doesn't seem to have any problems with the glue drying out.

I'm concerned that the PVA I've got isn't going to work well for the papers given the short drying time. Does anyone have a suggestion? Do I need a bookbinders paste of some kind that's more a water based product? If so, what brands are good for this kind of glue up?

Thanks!
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Manufacture
« Reply #3 on: April 09, 2012, 07:55:25 PM »

Bookbinders traditionally used flour and water paste, based either on wheat or rice flour.  I believe they nowadays tend to use a mix of paste and pva.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bellows Manufacture
« Reply #4 on: April 09, 2012, 08:42:23 PM »

Thanks Theo,

What kind of glue do you use for gluing papers down?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellows Manufacture
« Reply #5 on: April 09, 2012, 08:46:17 PM »

I use a liquid glue sold by Staples I guess it is based on gum arabic.   wallpaper paste is good too.  I avoid pva for papers because of the difficulty of removing the papers later.  Water based glues also have the advantage that you can let them soak in so the paper becomes supple and will fit itself to the slightly uneven surface of the bellows.
« Last Edit: April 09, 2012, 08:48:15 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Bellows Manufacture
« Reply #6 on: April 09, 2012, 09:31:38 PM »

My preferred glue is known as Bindflex 1161 (to my knowledge a Swedish product), a polyvinyl acetate book binding glue, easily thinned with water. I use it for my gussets, for the bellows cloth and tape, the metal corners and for gluing the frames. It's drying time allows for comfortable gluing of all the (usually 20) strips on 1 side in 1 go (http://www.youtube.com/watch?v=bbUIot6x10M&feature=share). It's not particularly difficult to remove the strips, should re-taping become necessary.
« Last Edit: April 09, 2012, 09:36:34 PM by diatonix »
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Bellows Manufacture
« Reply #7 on: April 09, 2012, 11:09:45 PM »

I'll have to use that technique next time - retaped a bellow today and it took about 10 times the time you use!
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Bellows Manufacture
« Reply #8 on: April 09, 2012, 11:11:10 PM »


1. When I make my concertina bellows I use strips of cards hinged together with cloth tape and leather. Most accordion bellows that I've looked at appear to be just a continuous folded card. Are there any manufacturers using hinged cards - it would make my process considerably easier to do it that way. So what are your thoughts about using hinged card?

AL ;D
I imagine concertina-built bellows would be lovely, you could make them deeper and be really different with less folds :D but it would be a lot of work. I'm sure a man of your calibre would have no problems.
But, Charlie Marshall sells the folded card... and at least one here has made their own (Telemorris? can't remember) by buying and folding. Depends how much time you have on your hands in the frozen north...
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Bellows Manufacture
« Reply #9 on: April 10, 2012, 05:11:22 AM »


... and at least one here has made their own (Telemorris? can't remember) by buying and folding.


I've finally gotten over my fear of doing the wrong thing and glued all the diamonds in place on the bellows for the mini melodeon. I'll let you know how they turn out. Papers should be on this weekend and corners shortly after that. Crossing my fingers I end up with something that's reasonably airtight.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Bellows Manufacture
« Reply #10 on: April 10, 2012, 03:20:11 PM »

My preferred glue is known as Bindflex 1161 (to my knowledge a Swedish product), a polyvinyl acetate book binding glue, easily thinned with water. I use it for my gussets, for the bellows cloth and tape, the metal corners and for gluing the frames. It's drying time allows for comfortable gluing of all the (usually 20) strips on 1 side in 1 go (http://www.youtube.com/watch?v=bbUIot6x10M&feature=share). It's not particularly difficult to remove the strips, should re-taping become necessary.

After seeing your video, and a lot of digging, I've managed to track down the UK Distributor for Henkels products, amongst which is Bindflex 1161. I now have to speak to them to see what they can offer in quantities and prices, but I have a sneaking suspicion that they'll want to sell it by the tanker load.

The other UK product is M155 Bookbinders PVA, available from Hewits (Lothian) and Sheppys (Kent). The downsides are that the minimum quantity is a 1kg pail, which isn't too expensive until the carriage is added, but is rather a lot of glue; and it's supposed to be used within 6 months of manufacture, which is a challenge if you're not a melodeon factory  (and perhaps a bookbindery as well).
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Bellows Manufacture
« Reply #11 on: April 11, 2012, 01:38:45 AM »

Kevlar corners, now that's what we need.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Bellows Manufacture
« Reply #12 on: April 11, 2012, 02:53:32 AM »

Here's an old thread about a self build project, and the thread covers bellows construction. The builder Tofffff (who hasn't been back in a while) says he's using Bindflex 1161 and it is available from a company called National.

And the YouTube videos from diatonix and Lester are really helpful. Good job, folks.  (:)

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Bellows Manufacture
« Reply #13 on: April 11, 2012, 03:58:11 AM »

FWIW I've added the two videos from Lester and diatonix to a post about retaping on Gumshoe. Sort of a play-by-play.  :||: :||: :||:

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Bellows Manufacture
« Reply #14 on: April 11, 2012, 07:49:30 AM »

...... The builder Tofffff (who hasn't been back in a while) says he's using Bindflex 1161 and it is available from a company called National.

And the YouTube videos from diatonix and Lester are really helpful. Good job, folks.  (:)

National Adhesives, which was a part of a company called National Starch, was sold to Henkel in 2008 (source - National Starch's Business Manager in Manchester, UK).

I've been doing a lot of digging.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Bellows Manufacture
« Reply #15 on: April 11, 2012, 09:37:43 AM »

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Bellows Manufacture
« Reply #16 on: April 11, 2012, 09:55:15 AM »



Eek - had some of that in once - wife made soup with it  :P

And I've not "been" right since!  :-\
     
Logged
  _       _    _      _ 

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Bellows Manufacture
« Reply #17 on: April 11, 2012, 09:56:56 AM »


Eek - had some of that in once - wife made soup with it  :P

And I've not "been" right since!  :-\
     

She must have been using the same cookbook as mine. I blame it on that Delia.
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Bellows Manufacture
« Reply #18 on: April 11, 2012, 02:11:24 PM »


The minimum order quantity for Bindflex 1161 from Henkels UK distributor is 30 kilos; for me, about half a century's supply, at the least. It is good value at £4.47 per kilo, though. They will decant it into 5 kilo lots, at 20 pence more per kilo, but the minimum stays at 30 kg. That's a pity.

So, it doesn't look as if I'll be using that glue, unless I can find a way to acquire a smaller quantity.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Bellows Manufacture
« Reply #19 on: April 11, 2012, 02:30:13 PM »

Why can't they direct you to their retailers? In Scandinavia it is also sold through a DIY/hobby mail order firm, min. qty. 1 liter: http://www.sloyd-detaljer.no/ArticleSearch.aspx?orgKeywords=  (for some reason I don't get a direct link, so search for "bokbinderlim")
Maybe there is something similar in the UK?
« Last Edit: April 11, 2012, 02:46:42 PM by diatonix »
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal