Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Squeaky Air Lever  (Read 1307 times)

0 Members and 1 Guest are viewing this topic.

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Squeaky Air Lever
« on: June 30, 2015, 01:33:32 PM »

In the last couple of days, the air lever on my Clément Guais box has developed a loud squeak. The button is similar in type to those on Castagnaris. Since the box was made last autumn, it has not encountered warm(ish) weather until now, so I assume that the wood has expanded due to the rise in temperature, causing the wooden button to rub against the sides of its aperture, but I might be wrong!

Has anybody else encountered this problem and if so, how did you fix it? I suspect that the answer will be to sand down the edges of the hole in which the lever sits so that it no longer rubs, but I don't want to start taking sandpaper to an expensive instrument until I am sure that I have correctly understood the cause of the problem and the solution.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Squeaky Air Lever
« Reply #1 on: June 30, 2015, 01:51:01 PM »

Wood usually shrinks with rising temperature due to lower moisture content and it takes some time, so I think you can discount that.
A common source if squeaks is where the wooded air button/wedge presses and rubs on the wire lever below.  Simple cure - take off the bass cover plate and rub a soft pencil on the Mark where the wire rubs against the wood.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Squeaky Air Lever
« Reply #2 on: June 30, 2015, 08:51:51 PM »

Thanks, Theo. I'll try that. Strange, though, that it came on suddenly with the rise in temperature. Probably just a coincidence.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Squeaky Air Lever
« Reply #3 on: June 30, 2015, 10:29:49 PM »

I put graphite on the end of the wire, but it had no effect. The squeak was still there when I operated the lever after I had taken the back off the box, which suggests that the place where the wooden air button makes contact with the end of the wire lever was not the problem. The lever was not binding on the sides of the hole, so the squeak could only be coming from the metal pivot which passes through the end of the lever into wooden blocks on either side on the inside of the back plate. There was no room to put graphite on the pivot whilst it was in situ, so I partially removed it (with some difficulty because it is a very tight fit) and applied some graphite to those parts of the rod I could reach. This has reduced the squeak, but it has not eliminated it entirely. Any other suggestions would be welcome.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Squeaky Air Lever
« Reply #4 on: June 30, 2015, 11:24:42 PM »

If the air button spring is a coil type (as distinct from a flat leaf-spring type) the squeak could be coming from the individual turns of the coil binding on each other.

Try putting some graphite on the spring coil. Proper locksmith's graphite powder is best, made into a suspension with alcohol (methylated spirit is good). Use a small artists' brush or cotton bud to dab the graphite/alcohol mix on to the spring coils. The alcohol will carry the graphite in between the coils and then evaporate to just leave the graphite in place.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Squeaky Air Lever
« Reply #5 on: July 03, 2015, 10:00:35 AM »

Sorry to have been slow to reply, Steve: we have been without electricity in our village for the last two days, so our internet connection was non-operational.

The air button has a leaf spring rather than a coil spring. However, the suggestion of using locksmith's graphite powder applied with a paint brush might work because there is just enough room down each side of the air button to slide a small flat-bristled artists' brush. I'll source some graphite powder and try it.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Squeaky Air Lever
« Reply #6 on: July 10, 2015, 12:33:10 AM »

The locksmith's graphite powder arrived in today's post and I made it into a suspension using methylated spirits. I was just able to reach the squeaking air lever pivot with a small flat artist's brush to apply the suspension and it seems to have penetrated into the pivot housing sufficiently to eradicate the squeak.

Thanks for the advice, Steve. I now have a silent air lever again.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Squeaky Air Lever
« Reply #7 on: July 10, 2015, 09:09:47 AM »

The locksmith's graphite powder arrived in today's post and I made it into a suspension using methylated spirits. I was just able to reach the squeaking air lever pivot with a small flat artist's brush to apply the suspension and it seems to have penetrated into the pivot housing sufficiently to eradicate the squeak.

Thanks for the advice, Steve. I now have a silent air lever again.

Glad it has worked for you, Bob!  (:)
You might need to re-apply it at some point in the future.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal