Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wood finishing question  (Read 1236 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Wood finishing question
« on: July 01, 2015, 10:01:28 PM »

Accepted that this is a trifle peripheral - but I can link it to melodeons - just... ::)

Question for the wood experts. I have a beech surfaced work top. I want to treat it with something durable that will keep the wood look and look nice, not take it down too much: BUT it has already been treated with a coat of linseed oil.  Not a lot (smells nice) but it's there.
Any suggestions for a durable finish that I can apply over the linseed oil? I'm guessing Theo's previously suggested epoxy finish won't stick.  :(

It will have melodeons put on it.... so on topic :-) ::)
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Wood finishing question
« Reply #1 on: July 01, 2015, 10:13:24 PM »

Depends in how hard a finish you want. Danish oil might work, as might deck oil.

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Wood finishing question
« Reply #2 on: July 01, 2015, 11:36:16 PM »

Not sure how soon after oiling would give it a grip Malcolm but I use colourless Sadolin Extra on wooden bases for model engines, previously oil saturated hardwood boxes for tools / measuring equipment, wooden boiler & cylinder lagging strips and our Oak kitchen worktop. If you wipe it on partly diluted it doesn't skin quite like a varnish which then scratches but it is more substantial and durable than an oiled surface and can be wiped over again to refresh the surface as it wears.

Oh and the new Maple endboards I  made for the early Hohner look a treat with it (firmly on topic  ;) )

These days the only problems are finding the colourless and then affording it...........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Wood finishing question
« Reply #3 on: July 03, 2015, 02:13:50 PM »

Junckers Rustic Oil.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal