Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Clackity basses  (Read 1140 times)

0 Members and 1 Guest are viewing this topic.

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Clackity basses
« on: July 05, 2015, 09:51:00 AM »

My recent TOTM, Rose of Raby, posted on youtube group "Accordeon Diatonique", has led to discussion of  unwanted noises on Loffets. My Loffet pro basses are certainly very clacky on that video. Might please the hohner enthusiasts even.
Bernard has written in to say instruments need to be serviced mechanically every two years, like a car to prevent the noises arising.  I haven't done that, more like every ten years!

But my Casta "label" Hascy is a good deal older than the Loffet and doesn't make those noises.  I suspect that it may be to do with the bass mechanism. There's a pivot/hinge between the bass button wire and the wire that lifts the pallet.  My Hascy and serafini have little rivetted hinges making a nice smooth and free connection.  As i remember, the Loffet has pivots made by winding one wire round the other, which looks less efficient.    My Loffet has been serviced a few years ago, and had the bass felts renewed by Theo, and some graphite onto the hinges, I seem to remember. 

Anyway, I wonder if you have advice and experience about reducing the bass noises.

And what's the experience of other Loffet owners..... any solutions found?

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Clackity basses
« Reply #1 on: July 05, 2015, 10:09:23 AM »

this particular tune actually comes to one's rescue. I tried it yesterday … first time in years … and it seems to like a really laid-back, sparse bass. Sort of … press a bass, squeeze in a chord, come off everything for beat 3, actually about 40% silence?

Not a "fix", I know,rather an example of how organology truly interplays with musicality?
Logged
  _       _    _      _ 

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Clackity basses
« Reply #2 on: July 05, 2015, 10:23:07 AM »

At least some of the clackityness is not coming from the bass mech but from the metal corners of the bellows hitting each other (good example at 0:09).

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Clackity basses
« Reply #3 on: July 05, 2015, 10:31:27 AM »

At least some of the clackityness is not coming from the bass mech but from the metal corners of the bellows hitting each other (good example at 0:09).

Yes indeed, some attention paid to moving the left end parallel to the right would deal with this, and give you better control of the bellows.  Most of the time your bellows movements are beautifully smooth and controlled, but just occasionally there are big jerks inwards with a marked rotation of the left end, presumably while using the air button.

I can hear some noise from the bass mechanism, but I wouldn't have described it as excessive or even particularly noticeable.
« Last Edit: July 05, 2015, 10:33:52 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jack Humphreys

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • tunesbyjackhumphreys
Re: Clackity basses
« Reply #4 on: July 05, 2015, 11:17:47 AM »

Thanks Lester and Theo.
When I get back from Streetdance-in-the-forecast-rain,  I'll do a recording of the basses with and without reeds sounding, so you can hear the mechanism noises properly!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal