Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: My Mundinger Has Arrived!  (Read 7919 times)

0 Members and 1 Guest are viewing this topic.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My Mundinger Has Arrived!
« Reply #20 on: July 12, 2015, 02:33:49 PM »

It has left me with sore shoulders, but I think I just need to play it more. That way, I can build up shoulder strength, and I won't get sore shoulders anymore!  ;D

May I make a suggestion? I have looked at your video and would recommend that you try to adjust your straps so that the treble keyboard is a) nearer the centre of your body, this will remove some of the cramping in your right arm and b) you try to arrange the keyboard more upright as it is currently rather twisted.

Here is a good example.

I agree with Lester's suggestions and will also make a comment of my own.
I know that your initial video was made shortly after you took delivery of your new instrument and therefore rather to be expected that you were attempting to play it in the same manner as your one-row.  However, as you are now realising, a 2.5 row Club box is a much heavier beast and requires a different technique.

The whole idea of the Club system with the Gleichton* on the 'F' row is that scales and tunes are much more logical to play using a smoother cross-row technique, especially on the bellows 'pull'. You should be able to find most, if not all, the notes you need by playing across the rows (i.e. using both rows and the helper row if needed), and using fewer bellows direction changes. As you have already found out, constantly 'waggling' the bellows is hard work and can lead to shoulder/arm fatigue (and even injury  :o ) with such a heavy box. Waggling is not impossible, but seeing as you now have a Club box, it would be worthwhile trying to explore the advantages of the layout.

Have a look at the C/F Club layout here and see if you can work out alternative cross-row fingerings for your tunes. If you search through the forum, you should be able to find other threads about the Club system.

* The Gleichton is the button with the same note (C) in both directions. Sometimes it has a knurled or raised patterning on it. Yours looks to have concentric rings on the button.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: My Mundinger Has Arrived!
« Reply #21 on: July 12, 2015, 10:40:03 PM »

I adjusted the straps. Now it is more centered.

I will try out more fingerings. It seems very capable of playing in many different ways.  ;D

One problem I have, is that my left hand keeps sliding up the strap, and away from the buttons. Are there any tips on how to stop this?

One other issue is that the bottom bellows snap has a screw that doesn't want to get screwed in. It must have a bolt on the back. Unfortunately I accidentally scratched the celluloid with the screwdriver attempting to tighten it (the screwdriver slipped.) However, the scratches are extremely minor, and they can only be seen in you are looking for them. Can you screw the screw in without taking the box apart to tighten the nut?
Logged
Mundinger Diaton III Grand Luxe C/F Club

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: My Mundinger Has Arrived!
« Reply #22 on: July 12, 2015, 10:55:27 PM »

As to the left hand I'd suggest tightening the strap!
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: My Mundinger Has Arrived!
« Reply #23 on: July 12, 2015, 10:59:57 PM »

Regarding the Club system, another very important feature is the "push" d (re) as provided at least once (your box should have it in two octaves) on the helper row!
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: My Mundinger Has Arrived!
« Reply #24 on: July 12, 2015, 11:18:54 PM »

As to the left hand I'd suggest tightening the strap!
I've tried that, but it seems that my hand stills slides a bit. However, I may be putting my hand into the hand-strap too high. Another possibility could be that I am moving the bellows wrong.  ???
Logged
Mundinger Diaton III Grand Luxe C/F Club

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My Mundinger Has Arrived!
« Reply #25 on: July 12, 2015, 11:53:18 PM »

One other issue is that the bottom bellows snap has a screw that doesn't want to get screwed in.
... Can you screw the screw in without taking the box apart to tighten the nut?
If the nut on the inside is rotating when you attempt to tighten the bolt on the outside, it is very unlikely that you will be able to tighten the assembly any further. The answer, as you surmise, is to open up the box so you can then get at the nut to hold it firm whilst you tighten the bolt.

It is not difficult to open up the box; it just needs a bit of care.

1. You need to pull out the bellows pins which secure the instrument ends to the bellows frame. You can see these on some of your photos - they are just fancy nails with a smooth domed head.

2. From your photos it looks as if there are 6 bellows pins on each end - 3 on the front and 3 on the rear, and similarly on the opposite end.

3. To remove the bellows pins use a pair of pliers to grip the head and pull out the pin with a firm straight pull. The pins might put up a bit of resistance but they will come out. You can use a small piece of cloth or thin leather to protect the celluloid from the pliers while doing this.

4. Remove all the pins on the relevant end of the box. Be sure to put the pins somewhere safe and ensure that you know which pin came from which hole - they can sometimes be of slightly different diameters.

5. When all the pins have been removed you can gently ease the end of the box away from the bellows frame. You should then be able to see the nut inside and then use a small spanner or pliers to grip the nut while you tighten the bolt from the outside.

6. Once the bolt is tightened sufficiently to keep the bellows strap from flopping about, a small drop of cyano-acrylate glue (superglue) on the thread where it passes through the nut will stop it working loose again (but can still be removed if necessary at some stage in the future).

7. Reassemble the box by carefully easing the end back on to the bellows frame - ensure you have got it the right way round!

8. Re-insert the bellows pins into their proper holes, using a blunt object such as a scrap of wood or a knife handle to gently push the pins fully home.

Job done!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: My Mundinger Has Arrived!
« Reply #26 on: July 13, 2015, 01:54:58 AM »

the bottom bellows snap has a screw that doesn't want to get screwed in. It must have a bolt on the back . . . Can you screw the screw in without taking the box apart to tighten the nut?

Sometimes there is no nut, its just that the hole in the wood into which the screw used to "bite" has become somewhat enlarged.  I seem to recall that Theo suggested a spot of wood glue, judiciously applied, and a toothpick could be used to make the hole a bit smaller, and could help to solve this problem. 

Logged
Charter Member Presumpscot and Fore River Accordion Club

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: My Mundinger Has Arrived!
« Reply #27 on: July 13, 2015, 12:34:26 PM »

Hmm, I wonder which my box has. It doesn't seem to be falling out, just getting loose, and dangling.  ???

I suppose I could open the bellows to see if there's a screw in there. What can happen if you make mistakes when taking the bellows off?
Logged
Mundinger Diaton III Grand Luxe C/F Club

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: My Mundinger Has Arrived!
« Reply #28 on: July 13, 2015, 01:03:59 PM »

I suppose I could open the bellows to see if there's a screw in there. What can happen if you make mistakes when taking the bellows off?

You should make a note about how the bellows and the ends where assembled in order to not corrupting the tightness...

and if there's not nut or female screw, you just might replace the wood screw with a machine screw, and cautiously bore through the wood...
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: My Mundinger Has Arrived!
« Reply #29 on: July 13, 2015, 03:11:30 PM »

Another possibility could be that I am moving the bellows wrong. 
There's an online tutorial that helped me a lot:
https://www.youtube.com/watch?v=DTZjeiqFbAA
It's called bellows technique for Irish button accordions. I think applying a bit of this technique is helpful regardless of playing style.

On the other hand you could try to 'play' like the guy in the black shirt: https://www.youtube.com/watch?v=JCwiviaqSGU
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My Mundinger Has Arrived!
« Reply #30 on: July 13, 2015, 03:13:30 PM »

Hmm, I wonder which my box has. It doesn't seem to be falling out, just getting loose, and dangling.  ???

I suppose I could open the bellows to see if there's a screw in there. What can happen if you make mistakes when taking the bellows off?
You're being over-cautious. Honestly, it's not that hard. Unless you are really, really clumsy and ham-fisted, you are not going to do any harm. Just follow the instructions, get on with it and do it.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My Mundinger Has Arrived!
« Reply #31 on: July 13, 2015, 06:27:45 PM »

the bottom bellows snap has a screw that doesn't want to get screwed in. It must have a bolt on the back . . . Can you screw the screw in without taking the box apart to tighten the nut?

Sometimes there is no nut, its just that the hole in the wood into which the screw used to "bite" has become somewhat enlarged.  I seem to recall that Theo suggested a spot of wood glue, judiciously applied, and a toothpick could be used to make the hole a bit smaller, and could help to solve this problem.
Looking at HW's photos at the beginning of the thread, you can see the type of bellows straps which are fitted. I'd be willing to bet that the strap is secured by a machine-screw/bolt with a nut, not a wood screw. Charlie Marshall has some photos on his website which illustrate the sort of thing. See here and look on the right to see the bolts and nuts.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: My Mundinger Has Arrived!
« Reply #32 on: July 13, 2015, 07:22:52 PM »

I opened the box up, tightened the nut, and put it back. at first I didn't use a cloth, but then I noticed small scratches, so for the last two pins, I used a cloth. Unfortunately, I forgot the glue. Next time it gets loose, I guess I will use glue.

While I was in there, I took some pictures. Are the reeds in good condition? Do you think the box was renovated at one point?  ???

Right Hand




Left Hand




I'm not sure what this number is. Does this mean there are only about 30 Mundinger/Adria Diaton IIIs in the world?  :o
« Last Edit: July 13, 2015, 07:25:39 PM by The Happy Wanderer »
Logged
Mundinger Diaton III Grand Luxe C/F Club

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My Mundinger Has Arrived!
« Reply #33 on: July 13, 2015, 08:52:53 PM »

It all looks very good.   Valves lying nice and flat, wax hasn't been messed with.   My guess is that it is all original, not renovated, but very hard to tell from photos.

The number is a batch number used in the factory to keep parts of one instrument together.  It doesn't tell you anything about how many were made.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My Mundinger Has Arrived!
« Reply #34 on: July 13, 2015, 09:33:09 PM »

I opened the box up, tightened the nut, and put it back....
Well done! Congratulations for having a go and doing the job.  (:)
As Theo said, it all looks good and nicely made.
I think you have done well in all respects.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: My Mundinger Has Arrived!
« Reply #35 on: July 13, 2015, 10:10:28 PM »

Thanks! I think it may be getting loose again though, so next time I tighten it, I guess I'll try to remember to apply glue!

One problem I had was that the reed block was in the way a bit, and so was the microphone wire. The bellows strap nut is behind the center reed block's screw panel. It seems like the nut can never really come off completely, due to the reed block being there.  :o
Logged
Mundinger Diaton III Grand Luxe C/F Club

savantuk

  • A Shropshire lad
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 401
  • Location - Whitchurch, Shropshire.
Re: My Mundinger Has Arrived!
« Reply #36 on: August 19, 2015, 11:34:04 PM »

Hi,

Just for interests sake, here is a pic of a Diaton C/F club which I used to own.  'Twas a beautiful box, just very heavy for my poor old bones.  It sounded lovely, and is now owned by Cugiok of this parish.  Good luck with your playing, not that you need much!!
Logged
Regards,

Doug

Castagnari Tommy D/G ~  Castagnari Max in C ~ Irish Dancemaster converted toy in C with Cagnoni reeds

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: My Mundinger Has Arrived!
« Reply #37 on: August 20, 2015, 11:00:55 AM »

Superb sound , and I want your melodeon face !!  ;)

Can you write limericks ?  >:E
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: My Mundinger Has Arrived!
« Reply #38 on: August 22, 2015, 01:03:37 PM »

Superb sound , and I want your melodeon face !!  ;)

Can you write limericks ?  >:E

Thanks!  ;D

Unfortunately, I'm not too good at writing poems.  :P
Logged
Mundinger Diaton III Grand Luxe C/F Club
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal