Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Maple?  (Read 6777 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Maple?
« Reply #20 on: July 12, 2015, 04:48:41 PM »

Laburnum is nice too, but I think Holly is my favourite. It's a bugger to turn, though.

John

Yes, laburnum's a lovely timber but difficult to find in large pieces. Make great veneers, though. Holly's a bit plain for me; very white, yes, but not a lot of figure - which is why it's used a lot in inlay work. It does make nice small turnings; great for chess pieces. Probably good for morris sticks, too! I sense a thread drift .........

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: Maple?
« Reply #21 on: July 12, 2015, 04:56:11 PM »

Graham, you'd go nuts at some of the finishes I've seen on the last 2 Melodeon Makers courses at Yeovil.
Emmanuelle uses French Walnut a lot. Especially the first lot I saw had both heart wood and dark wood in the same planks to start with. That meant the cases were two tone, dark on top going into a lovely creamy lighter wood as it neared the bellows, very similar in looks to a light Yew, but all Walnut.
Just gorgeous....
I love to look at wood grain.....
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Maple?
« Reply #22 on: July 12, 2015, 05:00:05 PM »

At Emmanuel's 1 row course I attended Marc Serafini made his 1 row out of olive wood. Looked stunning, weighed a ton.

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: Maple?
« Reply #23 on: July 12, 2015, 05:49:52 PM »

There's that French maker in the Pyrannee that uses Olive wood....can't remember his name off hand.... yes it does look nice.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Maple?
« Reply #24 on: July 12, 2015, 07:16:40 PM »

Plays havoc with steel tools, though. And it's a swine to work because it's so dense and its grain tends to be wild. As you can imagine, there's a good bit of it about here in Cyprus, but I tend to stay away from it unless I can find some really well-seasoned (I mean 20 years or so!) bits. I look out for discarded bits of old furniture, boxes, bowls etc.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: Maple?
« Reply #25 on: July 12, 2015, 10:37:47 PM »

As with any wood, how it will look down the road is dependent on a whole host of factors.

Personally I'd worry more about what it will sound and play like  (:)

If they've used decent, stable maple then it should sound just as good then as now so the issue is "do you like the box today?"

Steve
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Maple?
« Reply #26 on: July 12, 2015, 11:18:19 PM »

As with any wood, how it will look down the road is dependent on a whole host of factors.

Personally I'd worry more about what it will sound and play like  (:)

If they've used decent, stable maple then it should sound just as good then as now so the issue is "do you like the box today?"

Steve

You probably don't want to open up the "what does the wood sound like" can of worms yet again... ;-)

The maker has to care about things like whether it's a pig to work, prone to splitting or warping, whether dust from it is bad for you and so on, but all that really matters to the end user is whether you like the looks -- and maybe how heavy it is, if the walls are thick. Most of the problems like this with solid woods can be avoided by using ready-veneered aircraft ply, which is what Oakwood used to do.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Maple?
« Reply #27 on: July 13, 2015, 12:26:16 AM »

I don't think you should shelve your dream Q , another option may be Lacewood - quarter sawn London plane is a very attractive flecked, mid to light coloured wood which AFAIK is stable, available, workable and takes a decent finish, can't recall seeing a melodeon made from it, perhaps not common where materials for them are sourced ?

The more attractive the Yew, the more challenging the finishing  >:(

Laburnum was widely used as 'Oyster Veneer', thin cross sections laid up on a cheaper base parquet floor style.

A lot of the older light coloured veneer elements in stringing or marquetry features such as Box, Holly, Lime or Sycamore  were 'toasted' edgewise to differing degrees in hot sand to give a colour grading.

None of the above appear to be available these days at 3 ha'pence a foot, no, not even on ebay.de  :(
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Maple?
« Reply #28 on: July 13, 2015, 07:50:00 AM »

Given the Irwellian theme underlying this thread i'm a little surprised Oakwood didn't use marine ply, though gopher wood is more traditional ;)

Loved my own Oakwood (12 years) and was about to type that I played it to bits. But its non standard construction made it incredibly robust, as Ian seems to have also found, so perhaps not. 

Present kit (van der Aa) is finished in car paint, if that isn't too off topic :|glug
Logged
  _       _    _      _ 

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: Maple?
« Reply #29 on: July 13, 2015, 07:55:50 AM »

IanD:
1. NO! sound is absolutely *not* what this thread's about. Can of worms well and truly left closed  ;D

2. I do notice some makers are using veneer more and more, therefore having some very interesting burr type finishes whilst keeping it light. Arguably too, I would think a good ply might be more stable than an insufficiently dried solid wood.

BB: Not really dreaming of anything in particular, was just initially curious about how Maple aged.
One of those daft thoughts that hit me when glass in hand  ;)
Enjoying a trip exploring ideas of the wood varieties mentioned here though....

Ah Chris has popped up as I type.
Not sure about car paint, I think it might obscure the grain a touch  ;D
I think his Mahogany finishes look  'solid' though, giving a feeling of robustness.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Maple?
« Reply #30 on: July 14, 2015, 12:55:21 AM »

Q should be OK if Chris has used the same paint which Morris used on the Minor 1000 Traveller rear body frames or some of Theo's Patent Pink Pearloid Concealer  >:E

I saw some of Emanuel's gorgeous home brewed Walnut at Stowmarket for small stuff its viable to use tree wood but in a production environment the use of veneered ply has to be a no brainer for lightness and stability but just like cross point screws, seems 'wrong' in such quality work.

Keep dreaming but more importantly keep  :|glug ing
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: Maple?
« Reply #31 on: July 14, 2015, 09:39:55 AM »

Ahh... the good 'ol Moggy Thou..... brings back memories!

I know what you mean about ply, except..... I have an early Lachenal Edeophone and the fretwork on it is Ebony ply, which when you consider what fretwork is makes sense. I know exactly what you mean by saying ply seems wrong, but even the best concertina makers used it when necessary, and it does have inherantly good properties.

" Keep dreaming but more importantly keep   :|glug ing....."

Ah such sage advice.....thank you I will remember......
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Maple?
« Reply #32 on: July 14, 2015, 10:16:25 AM »

The only box I ever had that was light maple was my Oakwood model 7 ... it started off life very pale but it darkened over the 6 years or so that I had it to a kind of honey colour.  It was harder wearing than boxes I've had in fruit-woods taking fewer dings and less deep ones.  It had the potential to get grubby but it could always be cleaned as it was lacquered preventing the dirt from getting in the grain of the wood.

I think that once it's yellowed and aged a bit - maple looks amazing with black buttons and a flash of red bellows and felt.  Really classy.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: Maple?
« Reply #33 on: July 14, 2015, 10:22:49 AM »

It sounds like the Maple used does go into a nice honey colour, it seems to be a general observation. Interesting that it took dings better than others. I wouldn't have thought that.
I'm sure i've seen an older Maple box that did look grubby, but as you say, so long as the varnish holds up and not warn away, it will clean up.
OK thanks for that!
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

benammiswift

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 158
  • Squeezing for Derbyshire
    • benammiswift.co.uk
Logged
Castagnari Handry 18

Thrupenny Bit

  • Hero Member
  • *****
  • Online Online
  • Posts: 7232
  • happily squeezing away in Devon
Re: Maple?
« Reply #35 on: July 14, 2015, 11:07:24 AM »

yes, it does yellow off quite nicely.
thank you!
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Maple?
« Reply #36 on: July 15, 2015, 11:49:35 PM »

" I  know things like Paduk changes colour as it ages, and I think that Walnut darkens slightly as it ages"

Some Padauk goes off to a vermillion, others go orange.. depends on the source and its current environs.
American varieties of walnut lighten with age.

Maple goes yellow, then off into amber and nut brown.

Some furniture reproductionists use nasty stuff such as lye to darken maple.. (no greasy kid stuff modern stains)
I would not recommend this.. it is dangerous. It is a quickie oxide(a)nt. Caustic.

Logged

Jack Campin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 764
    • Jack Campin's Home Page
Re: Maple?
« Reply #37 on: July 16, 2015, 12:40:12 AM »

Lye is an alkali, not an oxidant.

Once it's washed off whatever you've treated with it, its risk is nil.
Logged
http://www.campin.me.uk/

I can't figure out how to quit but I will no longer check this group and have deleted all shortcuts to it.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Maple?
« Reply #38 on: July 16, 2015, 06:28:45 AM »

Lye is an alkali, not an oxidant.

Once it's washed off whatever you've treated with it, its risk is nil.

When I worked in a frozen food factory in Norfolk we used Lye to peel the spuds, tons and tons of em!
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Maple?
« Reply #39 on: July 16, 2015, 12:20:00 PM »

Melodeon's safety warning regarding lye was well founded, it can be sourced as strong as concentrated caustic soda, not something to play with without protection against skin, eye or other contact (my wife is a soapmaker) it strips greases, paints etc and can etch aluminium alloys. 

Sorry to report Nick that if it was the Worstead spud plant, it was recently shut down.

other spellings of Aluminum may be available
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal