Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Replacing button actions on Hohner  (Read 2196 times)

0 Members and 1 Guest are viewing this topic.

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Replacing button actions on Hohner
« on: July 13, 2015, 10:25:11 AM »

Hohner melodeons give us a wonderful sound, due mainly to a combination of the material and construction of the box and its reedblocks and the reeds used, but they are harder work to play than their Italian counterparts. Would it be feasible (technically and cost-wise) to replace the treble and bass button action mechanisms (say on an Erica) with much better quality ones, and would this get us near to the much better "feel" of the Italian actions?
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Replacing button actions on Hohner
« Reply #1 on: July 13, 2015, 11:25:40 AM »

I've often thought that it would be a good idea to make replacement RH keyboard/lever/pallet sets to fit Hohners.  Something a bit like Saltarelle's Le Bouebe open low-stepped keyboard would be my personal choice.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Replacing button actions on Hohner
« Reply #2 on: July 13, 2015, 11:54:30 AM »

It is possible to improve the Hohner original.

I restrict the travel and then spend a bit of time resetting the springs to lower tension. Makes the action lighter and faster.

Phil B

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Replacing button actions on Hohner
« Reply #3 on: July 13, 2015, 12:52:02 PM »

I agree with Lester,s approach, I have done this on my AD Presswood and the keyboard action is as good if not physicaly a little easier to play than my Castagnari Sander
Logged

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Replacing button actions on Hohner
« Reply #4 on: July 13, 2015, 01:53:48 PM »

I too have lowered the buttons, limited the key travel and softened the springs on my B/C Pokerwork, and it plays just as fast as any of my "better" boxes.  However, its keyboard still lacks the refinement of more expensive boxes - the buttons can move side to side, and clack on the plastic fingeroard - so it doesn't work quite as well as  I would like it.

For loud fast dance music, fixing the springs and key travel is probably enough.  I think that the reeds in low-end Hohner boxes are very good - good enough to merit a better keyboard to give full benefit when playing other than for ceilidhs or morris.

It's a pity Hohner don't offer the Morgane with an option for Pokerwork reeds.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Replacing button actions on Hohner
« Reply #5 on: July 13, 2015, 02:42:06 PM »

It's a pity Hohner don't offer the Morgane with an option for Pokerwork reeds.

I don't think there is any difference in the reeds fitted to Morgane and Pokerwork, except the Morgane is tuned with less tremolo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Replacing button actions on Hohner
« Reply #6 on: July 14, 2015, 02:57:59 PM »

that's really interesting, Theo.  To my ear the Morgane reeds seem to sound very different - less hard-edged.  As I've never had a close look at a Morgane reed I'll bow to your judgement. 
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Sandy Flett

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
    • Accordion and Melodeon Blog
Re: Replacing button actions on Hohner
« Reply #7 on: July 14, 2015, 03:11:51 PM »

The bodies of the Morgane and Pokerwork are (look?) quite different which could be adding to the differences in sound.
Logged
DG Dino Baffetti Carnival II (plus accordions)
Accordion and Melodeon blog

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Replacing button actions on Hohner
« Reply #8 on: July 14, 2015, 04:16:36 PM »

I got as far as sketching out an open keyboard assembly for a Pokerwork (long since lost). There's no reason why this should not be effective and it will be as good as your craftsmanship allows.  Indeed, the benefits of the open design are that all parts are supported by their geometry against movement in unwanted planes, but the tolerancing must prevent friction between the parts.  I'm sure you could achieve a more even feel and response with practically no mechanical noise, yet the best keyboards I've played had closed metal actions?!  I guess this comes down to how well bushed all the pivots are - just think how substantial the levers are in a Briggs.

Rob.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal