Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Reed frames ( Brass Zinc or Ali ) - what's the difference?  (Read 8532 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Reed frames ( Brass Zinc or Ali ) - what's the difference?
« on: July 13, 2015, 02:48:56 PM »

Whilst browsing the Facebook page following Squeezy's recent acquisition of an Albrecht, it notes the reeds are Dix with brass frames.
I've seen a recent mention on Theo's webpage of an old Hohner having zinc reed frames, and apparently some can be aluminium.
A little while ago Jon Loomes tried to put brass reed frames into the DB Oakwood deluxe saying he thought it 'darkened the sound', whereas if I'm remebering right, people thought it would just add weight and have no effect on sound ( never saw anything more of Jon's idea after the pototype was announced ).

My question is - why Brass?
and is there any difference in the reeds having different frame materials, apart from I presume, potential a weight issue with Brass.

Thoughts peeps?
cheers
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #1 on: July 13, 2015, 03:48:22 PM »

There is a difference in tone between reeds set on plates of different materials - I didn't specifically ask Kay to put brass plates in but he felt that they would be a good match for the box he was making for me and he knows a lot more about these things than I do!

I think that the general rule is that the heavier and denser the material used for the plates, the more mellow the sound becomes.  I don't know the mechanism for that but I imagine that lead or gold plates would be very mellow indeed!  Aluminium has come to be used due to it's cost-effectiveness and lightness I believe - but results in reeds with more high harmonic overtones than the old zinc or brass plates.

The Albrecht boxes seem to be fairly experimental in their designs at the moment - I've seen him use several top end Italian makes of reed and also those made by Harmonikas in the Czech Republic including these Dix reeds which are produced in the same factory by Harmonikas to the old designs.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #2 on: July 13, 2015, 03:57:52 PM »

As you say, let a good maker have his head and do what he thinks is right.
I can see having dense material must allow for greater transfer of sound at a basic level, and beyond that I'm lost! As you say trust in your maker.
I wasn't sure if it was his decision or something you'd specified for some reason... and I do agree he's experimental in his design, it does seem to cause a stir!
thanks
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #3 on: July 13, 2015, 04:00:02 PM »

... and Andy Cutting's new box that he built himself at Emanuelle Pariselle's house has Binci reeds (I think) on brass plates.  So it's not a completely bizarre choice.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #4 on: July 13, 2015, 04:02:32 PM »

Oh no, didn't think it was bizarre for one second....just wondered why!
After all you both have a lot more experience about these things than me.
Q
adopting humble mode  ;)
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #5 on: July 13, 2015, 04:04:06 PM »

I can see having dense material must allow for greater transfer of sound at a basic level,

But the bit that is making the sound is not the plate so changing the plate material should have any effect on transfer of sound.

My theory is that the heavier the plate the more rigidly the fixed end of the reed is held and this has an effect on the tonal quality.

I have only ever played on brass plated box and could not detect any effect of the plate material against a similar box (on one of Emmanuel's courses) but it did make the box significantly heavier.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #6 on: July 13, 2015, 04:09:57 PM »

Thanks Lester, point noted.
Yes, there must be a weight penalty I'm sure
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Phil B

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #7 on: July 13, 2015, 04:25:19 PM »

I picked up the DB super with the  steel reeds on brass plates at Sidmouth last year to try it out and
Logged

Phil B

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 118
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #8 on: July 13, 2015, 04:38:11 PM »

sorry hit the the wrong button again, and I never gave it back but brought it home. To my ears it has a clarity of tone throughout the range and and can be be played at a whisper or loud enough to deafen me, I also have a presswood with zinc plates and one with aluminum plates and to my ears the reeds with zinc plate have a much richer tone, though that may be to the way microbot set it up.
Thrupenny Bit, if you ever stray as far as the Cornish border let me know and you will be welcome to try them for yourself and make your own mind up Phil B
Logged

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #9 on: July 13, 2015, 04:49:46 PM »

I have only ever played on brass plated box and could not detect any effect of the plate material against a similar box (on one of Emmanuel's courses) but it did make the box significantly heavier.

The same appears to be true with concertinas: Vintage instruments ususally have brass reed shoes, whereas the few older and not-so-few post-war instruments with aluminium reed shoes are known as significantly lighter in comparism to those "normal" boxes...
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #10 on: July 13, 2015, 04:56:54 PM »

Phil, thank you, that is a kind offer.
You never know, Passport in hand and all that   ;)
Interesting observation there with Zinc v's Aluminium.

BES: Yes I'm very aware of the use in concertinas, though there I always considered it simply a weight saving exercise.
I once had a McCann Duet with aluminium reed plates in and it is considerably lighter then another instrument identical one but for the brass reed plates. I was unaware of the sound though.

I was wondering - apart from weight - if there was any difference and it's looking like there is a good reason for choosing brass to give a better tone, unless weight *is* an issue.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #11 on: July 13, 2015, 07:17:20 PM »

Usual question -- apart from being heavier and "more traditional" (available long before aluminium), do brass/zinc frames really affect the sound or not? Maybe heavier frames give a more stable mass for the reed to vibrate against so more energy stays in the reed and less goes into the reed blocks (probably a good thing)? Maybe making the whole reed block heavier helps? Maybe modern brass frames are more carefully finished with smaller reed clearances and better setup (because more expensive?) than aluminium ones?

Lots of maybes and suppositions, no real proof either way as far as I'm aware...

(remember, even instrument builders have been known to have genuinely-held but wrong beliefs, expectation bias explains a great deal)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #12 on: July 13, 2015, 09:50:24 PM »

I think with all these variables - there probably is a small difference but I would imagine that it's far smaller than we all like to think.  However when a maker is aiming for a certain sound or effect then if they put all the little pieces together then it probably does move the instrument in the direction they are looking for.

Which part causes the effects might never be discovered in a quantifiable way.  I think it ends up by being more like cooking than engineering ... but there are some mighty fine cooks out there!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #13 on: July 13, 2015, 11:05:22 PM »

Just to illustrate how the behaviour of a reed and sound of a box doesn't correlate with anything: I've just had my Jeffries Anglo back from tuning by Steve Dickinson. One note was a bit weak and slow to start if played quietly. Before taking it back to Steve, I tried lowering the set of the reed. It started better, but still sounded a bit weedy. In contrast the same note on another button in the opposite direction was loud, fast and bright. Then I had the idea of swapping the reeds. Now they are both perfect in response and tone.  :o

Nominally same material for reeds, frames, wood etc. The only difference might be that the resonant chambers around the reeds weren't the same size, and that somehow complemented some other invisible difference in the reeds themselves.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #14 on: July 13, 2015, 11:49:21 PM »

Not likely to be resonance of chambers.  More likely one reed not well fitted to its slot.  A common problem in concertinas.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #15 on: July 14, 2015, 12:13:31 AM »

I don't know the how's or why's, and sure don't have technical proof, but to my ears, the brass has a clearer brighter tone than aluminum.  I've only compared like reeds from Ciccarelli in my boxes, some on brass, same type reed on aluminum. 

I love the rich tone from the old zinc plated reeds.  Harmonikas is the only company that I know of who makes reeds with zinc plates as an option, and my trial set should be in any day.  But I won't have a comparison there until I also try their aluminum plates, and even then, not til several sets tried.

Weight is noticeable more with brass.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #16 on: July 14, 2015, 12:28:30 AM »

As each reed is attempting to shake its reedplate at its tuned frequency (= & opposite reaction et al) and the reedplate is trying to resist this and transmit to or share with the fondo / other mounting structure, there must be a null point of vibration between rivet and free end of the reed.

Have any of our tuning bretheren ever noticed any relationship regarding where a scratch or more likely filing needs to be to acheive the same frequency on reeds of varying length and / or thickness ?  If so it might not be such a daft idea that the relative mass of reed and plate do have an effect and anything which tends to absorb higher frequencies is likelier to sound more mellow, whether it be reedplate or box.

What about the single plate reeds in the cheaper old one rows, or were they all brass reeded ?

Has anyone got a decent Mic and a PC with a spectrum analyser ??

All we need is some suitable thickness sheets of depleted Uranium and Magnesium from ebay.ru to make up a few reeds and experiment.  ;)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #17 on: July 14, 2015, 07:21:02 AM »

After reading all the speculation expressed in this thread , I am wondering if the internal damping characteristics of the different metals contributes to the tonal differences we perceive? Most of my melodeons are old German one rows. My favorite ones all have steel reeds on individual zinc plates I.e two gold medal globes. I have one almost new Acadian, which is a delight to play, but the Binchi reeds sound tinny and squeaky compared to the reeds in my two old Globe gold medal boxes. I find myself more inclined to play the old boxes even though the new box is easier to play.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #18 on: July 14, 2015, 09:16:58 AM »

Depleted Uranium reed frames sound great fun. Thought it only got used by tank guns, and in Radiology departments! :o
Logged
  _       _    _      _ 

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #19 on: July 14, 2015, 12:41:17 PM »

OT - what is its Radiological use Chris ? or were you meaning expired sources ??

Never encountered anyone who had (or could admit ?) to machining it - Lead might be a more realistic dense material to try but may be too ductile to adequately rivet a reed to.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal