Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Reed frames ( Brass Zinc or Ali ) - what's the difference?  (Read 8527 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #20 on: July 14, 2015, 01:02:56 PM »

Well, whatever the theoretical alternatives, history dictates the three mentioned, brass, zinc and Ali are the way to go.
Looks like if you want a good rich sound and the weight handicap isn't too much of a personal worry, brass is the way to go.
Also long term I think it's stable. I remember a long while back talking with John Holman who was a colleague of Colin Dipper and used to tune my concertinas. He remembers having a Duet in with Ali frames....except they had reacted over the years with the atmosphere and the frames were disintegrating. Might be light but....!
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #21 on: July 14, 2015, 01:27:24 PM »

I wonder how far the psycho-acoustic element is active in all this. You want to hear a difference, so you do. It's difficult to see how objective evidence could be assembled; you'd need the same reeds, tuned in the same way by the same tuner and in the same acoustic environment with the same valves and the same air pressure (among other variables!) to even begin to collect any meaningful data. Doesn't mean there isn't a difference - just that there may not be. Or may be.....

Think it's time for a drink....... :|glug

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #22 on: July 14, 2015, 01:58:49 PM »

OT - what is its Radiological use Chris ? or were you meaning expired sources ??

Shielding, I'd guess. Better than lead, being denser?
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #23 on: July 14, 2015, 07:24:28 PM »

Spot on … at 1MV+ you just need "mass". nearly 2x lead density and much cheaper ;) but generally therapists try to aim the beam into a hill or earth mound. However, when space is tight … as in a reed block ;)
Logged
  _       _    _      _ 

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #24 on: July 14, 2015, 10:30:47 PM »

Have you. like, got any contacts Chris? nudge nudge wink wink  ;)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #25 on: July 15, 2015, 08:26:53 AM »

The geeks forums have several conversations on 238U - as we know it's barely radioactive "depleted" obviously. The problem is in milling it - as a heavy metal its biochemical toxicity is close to mercury and lead. So we really do need something a bit more practical.

Guess the therapists can get it because they have physicists on tap. They can get hold of some truly evil isotopes, albeit in nanogram amounts on the whole. It believe D.U comes in bricks and sheets, but haven't seen it - all my knowledge came from a conversation with a tame physicist, and that some time back.

Logged
  _       _    _      _ 

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #26 on: July 15, 2015, 01:30:31 PM »

This forum hosts some amazing knowledge, thanks Chris, unfortunately heavy metals go hand in hand with toxicity.

Back closer to topic, is it likely that variation in the reedframe dimensions, mass & hardness between metals can be contributing to the perceived degree of mellowness / shrillness ?

The difference between my Pokerwork and Liliput is notable in both sound and (apparent) vibration as felt by the hand, while making some sort of audio comparison by microphone should be possible, without a high speed camera / strobe / vibration transducer its not easy to see a way of measuring this aspect - has ukebert tried anything during his research ?

Having a stab at the probable aspects influencing the tone (timbre ?)

Reed - initial dimensions (including fit in reedplate slot), material, hardness, subsequently modified by tuning, which sets the effective length, amplitude of oscillation, null point or origin of oscillation. These appear to control the frequency and amplitude of the direct chopping / agitation of the air passing through. This will be modified by the reed chamber and other airspaces in the box, some frequencies may be absorbed and attenuated, others may be returned through resonant components.

Reedplate - dimensions, material, hardness. the reedplate and in turn the surface(s) to which it is attached will be trying to resonate in opposition to the forces from the reed, the size, mass, hardness (?) will determine how much vibration is absorbed or damped and how much is re radiated through the surfaces to add (or subtract if there is a frequency /2 timelag) from the direct 'audio' from the air moving  through the reeds.

So rank amateur 'target' launched, pls shoot down in flames  ;)

To paraphrase the stock reply of an old biology teacher when questioned on any complicated chemical aspect might have said ' Thass all to do with vibrations'

Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #27 on: July 18, 2015, 01:20:25 AM »

It certainly used to be popular to use depleted Uranium for racing yacht keels, so it may be possible for us plebs to get some - especially if you dive any reefs in the Solent!  Mind you, when the J class yacht Velsheda was first rebuilt, it was by a scrap dealer millionaire so he filled a steel keel case with a wall of lead bricks and cement.  Quote "I can do bricklaying but short of experience smelting..."

I would suppose the ideal attributes are rigidity and lack of creep, so the reeds rivet up nice and tight and stay that way.  That would favour dense, therefore heavy materials for longevity.  Any salt in the air and ali will soon disappear in contact with steel, sounds like the example above lived by the seaside.

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #28 on: July 20, 2015, 03:56:07 PM »

It certainly used to be popular to use depleted Uranium for racing yacht keels, so it may be possible for us plebs to get some - especially if you dive any reefs in the Solent!  Mind you, when the J class yacht Velsheda was first rebuilt, it was by a scrap dealer millionaire so he filled a steel keel case with a wall of lead bricks and cement.  Quote "I can do bricklaying but short of experience smelting..."

I would suppose the ideal attributes are rigidity and lack of creep, so the reeds rivet up nice and tight and stay that way.  That would favour dense, therefore heavy materials for longevity.  Any salt in the air and ali will soon disappear in contact with steel, sounds like the example above lived by the seaside.

Rob.

If you want a stiff (maybe less important) dense (maybe more important) metal there are some interesting candidates:

Metal   Density    Modulus
Al        2.7         69
Zinc    7.0          83
Brass   8.5         100-125
Uranium 18.8      166
Gold    19.3        75
Tungsten 19.3    345
Plutonium 19.8    97
Platinum 21.5      147
Iridium  22.4       517
Osmium 22.6       552   <== best possible reed-frame material?

Nobody said they needed to be machinable, non-toxic, affordable or available...
« Last Edit: July 20, 2015, 04:09:52 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #29 on: July 20, 2015, 04:48:25 PM »

Interesting indeed!  It just goes to show how misleading our loose use of terminology can be.  We all tend to talk of aluminium as if it were used pure, but in that form it's all but useless for most applications.  Various alloys make it useable for all sorts of things.  Otherwise, the figures suggest that gold would be more useful, yet that is obviously a nonsense.

I once did some practical metallurgy on an OU summer school.  The project involved aiming to alloy aluminium and copper for best tensile strength, so it also had to be heat treated and work hardened.  Most samples came nowhere near their theoretical test strength as hand working had created stress raisers throughout.  While inebtiate, one of the lab techs slipped us a sample of the alloy used for the Concorde's skin, we duly roughed it up a bit and achieved an almost perfect result for an Al/Cu alloy.  Of course we fessed up, but it did prove why the samples fell short of expectations.

Mind you, there's more than one type of brass...

Rob.
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #30 on: July 20, 2015, 09:54:05 PM »

Gold it is then!  Can't get more bling than that!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #31 on: July 20, 2015, 11:19:54 PM »

Maybe it's  the difference in density between zinc and aluminium that influences the resulting sound (discuss). I've also noticed an improvement in brightness before and after tacking reed plates in place, at least on the old accordions I've restored. The Pariselle reeds are held on with screws.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #32 on: July 21, 2015, 12:48:16 AM »

Tungsten is really dense, and really hard. It would make good reed plates if weight is your goal. I handled 3 inch ball of it one time, at first I thought it was attached to the table when I tried to pick it up, felt really unnatural to hold like someone was somehow secretly pushing down on it.
 I use it for the check valves in the steam car, pretty damn resistant to corrosion. alloys are available that machine in a manner similar to steel.
 I have only seen one accordion in 20 years that used steel/iron reed plates.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #33 on: July 21, 2015, 01:10:23 PM »

If the reed plates in piano accordions were made from plutonium, it might solve the problem of large gatherings once and for all... ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #34 on: July 21, 2015, 01:19:57 PM »

 >:E :||: >:E
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #35 on: July 21, 2015, 01:27:55 PM »

If the reed plates in piano accordions were made from plutonium, it might solve the problem of large gatherings once and for all... ;-)

In the first instance it would result in a truly bright sound...
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #36 on: July 21, 2015, 06:49:19 PM »

And in the second instance a very loud one...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #37 on: July 21, 2015, 11:23:59 PM »

Bb thereafter
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #38 on: July 22, 2015, 07:33:49 AM »

And fallout with everybody  :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #39 on: July 22, 2015, 08:35:19 AM »

So in the end even more blame on the PA players...  :'(
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal