Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Reed frames ( Brass Zinc or Ali ) - what's the difference?  (Read 8509 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #40 on: July 22, 2015, 11:40:41 AM »

I can't quite think of the tern to describe this requirement.  I'm assuming (don't we all?) that actual density, i.e. weight, contributes nothing to the design, but rigidity is required so as not to absorb/waste any energy, also wants to be accoustically inactive, no resonance in the frequency range of the reed or its audible harmonics.  Density may help there, but bear in mind that brass is used to make bells!  Presumably physical shape can be used to minimise any coupling?

The more you think about it, the more variables can be identified in this single component.  So, hardly surprising that makes of accordions have a recognisable family sound.

Rambling again...

Rob.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #41 on: July 22, 2015, 12:50:57 PM »

To add to the ramblings , bells are not made of brass. Bell metal is a mixture of copper and tin in a 4:1 ratio. ie. 78% copper 22% tin . Well off thread but interesting all the same. 8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #42 on: July 22, 2015, 06:24:24 PM »

I can't quite think of the tern to describe this requirement.  I'm assuming (don't we all?) that actual density, i.e. weight, contributes nothing to the design, but rigidity is required so as not to absorb/waste any energy, also wants to be accoustically inactive, no resonance in the frequency range of the reed or its audible harmonics.  Density may help there, but bear in mind that brass is used to make bells!  Presumably physical shape can be used to minimise any coupling?

The more you think about it, the more variables can be identified in this single component.  So, hardly surprising that makes of accordions have a recognisable family sound.

Rambling again...

Rob.

Mass (density) is much more likely to be important than rigidity. A reed frame (even an aluminium one) is pretty damn rigid compared to anything else in a box or that it's attached to, try bending one if you don't believe me -- the difference between different metals (pretty damn rigid to stupidly rigid) is unlikely to make any difference.

A heavier reed frame acts as an opposed inertial mass to the reed vibrations and will reduce the energy coupled into the reed blocks, depending on the block material and how the reed is fastened to the block. If the block is also rigid (e.g. machined out of aluminium, see 21st century box thread) and the reeds are firmly fixed to it then the block itself acts as the inertial mass and the reed frame metal will make no difference again since the whole block acts as the inertial mass.

No fastened-down reed frame is likely to have any structural resonances internally (too small and stiff), but will have together with the reed block -- if this is wood, heavier (denser metal) reed frames will lower the frequency of these resonances and could affect the sound.

So it's easy to see how the density of reed frames fastened to conventional wooden reed blocks could affect the sound since this will affect the reed block resonances (which are a bad thing anyway), and heavier is probably better -- unless this moves the resonances down from a less harmful frequency to a more harmful one, in which case heavier could be worse...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #43 on: July 23, 2015, 11:52:01 AM »

I love the way that every time reed accoustics comes up as a topic … the whole forum drops into subjunctive "perhaps" mode  >:E
Logged
  _       _    _      _ 

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #44 on: July 23, 2015, 12:55:40 PM »

I love the way that every time reed accoustics comes up as a topic … the whole forum drops into subjunctive "perhaps" mode  >:E
There are very good scientific reasons why reed plate mass could make a difference to the sound (and metal rigidity isn't likely to) but nobody has proved it with measurements yet, so it's a hypothesis, so we use words like "may" -- this is how the scientific method works, as opposed to stating opinions as definite facts ;-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #45 on: July 23, 2015, 01:08:11 PM »

Don't take the "forum scientific method" as too negative Ian, but in the past we have gone rather far on few real facts. It's been a bit like discussing the surface of Pluto ;) I truly recognise your big contribution in bringing some empyrical basis into this, and indeed in telling us about other's experiments.
Logged
  _       _    _      _ 

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #46 on: July 24, 2015, 01:27:56 PM »

There are other hypotheses which lack the absolute proof based on experimental data.  As it would not be cost effective or perhaps even possible to design and perform experiments to define each variable, the understanding of the influences each component has on volume and timbre has to be based on observations of results, correlated with the known differences in construction.  Wow, bit of a mouthful!  My ramblings are just that and should be ignored like a drunk in the bar (yes, that was me) but it ellicited an informative answer from Ian, so nothing lost.  As I said earlier, I believe all this explains why some manufacturers' set of opinions result in a discernible family sound across their range of boxes.  My much lamented Trilly had a metal mounting board for the reed blocks (notice I didn't fall into that fondo trap...) whereas my Nik had a wooden board, yet they both sound like Castagnaris.

If I really had the devil in me today I'd ask whether this impinged on the question of why a 2 voice box sounds better than its 3 voice equivalent with the third set out! 

Rob
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #47 on: July 24, 2015, 02:16:00 PM »

… fair question. Again no experimental evidence, and again much from the "craft" side. I think it is because on a 2 row (properly fettled) all has been put in tune with itself and with the diatonic scale that underpins its "sweet spot".

Everything on a 3-row has compromise, notably they nearly all get even temperament tuning. even in their own "sweet spots" the like of Lester, Rees and Theo can get better harmonic musicality than that.

… but I speculate  ;)
Logged
  _       _    _      _ 

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #48 on: July 24, 2015, 02:29:39 PM »

I was really meaning the tone rather than the tuning, Chris.  Many people with better ears than me confrim the fact that a 3 voice with one stop cutting it down to notionally the same as the 2 voice equivalent will never have the same sound.  My own guess is that much may have to do with the cross section of the bellows and therefore achievable air pressure, but I'm also pretty sure other influences are involved. 

You may have something with a 3 row sounding different from a 2 row but I hadn't the nerve to enter into that scenario too!  Interesting to think that a tuner may have so much more to consider as the alternative fingerings increase, though.  It sounds like a good argument against dry tuning as things get more complex.

Rob.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #49 on: July 24, 2015, 02:33:31 PM »

All part of the fettling? We tend to play up tuning issues. In action the left arm force v bellows pressure balance, the dynamics of that, therefore also  the weight of the left end.

Then - action sensitivity of the buttons are all part of the sound too? And the 2-row seems to be a "sweet spot" in many of these respects :|glug
Logged
  _       _    _      _ 

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #50 on: July 24, 2015, 02:47:30 PM »

Not quite, Chris, your arm can only exert so much force and the cross section of the bellows defines what air pressure will be produced for that input.  It's very much like the tyre pump for a car has broad piston for high volume, low pressure tyres and a pump for a pushbike has a narrow bore to produce hlow volume, high pressure output.

I started off just meaning the differences in tone dpending on how many voices the box is built with, not rows, and how that affects the tone produced.  Can't see the relevance of the action in this - although I guess that is just my belief? ;D

Rob.
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Reed frames ( Brass Zinc or Ali ) - what's the difference?
« Reply #51 on: July 25, 2015, 12:31:36 PM »

On a 3-voice with a stop, the holes in the "fondo" for the reed block with a stop have to be smaller (less than half the reed pitch wide) to allow the slide to close them off. Normally the pallet holes for the other blocks are the same size for ease of manufacture. On a two-voice (no stop) the holes can be considerably bigger (more than half the reed pitch) because there's no need for the slide to close them off, this gives a brighter louder sound.

The difference is obvious comparing my Oakwood model 4 to any of the 3-reed Oakwoods I've played, or Jerry Tozer's 2-reed 3-row which has only 2 reed blocks with tighter spacing -- all with the same size bellows, and yes I've checked the size of the holes and there's a big difference, even allowing for tuning differences.

Boxes with smaller bellows can appear to be brighter and louder played with the same effort (higher air pressure) so you have to push harder to get the same sound, but this isn't what's happening here since the bellows are the same size.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal