Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed damper  (Read 2285 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Reed damper
« on: July 26, 2015, 06:16:58 PM »

I bought an old Swiss made CBA the other day, C griff, "Record" brand by Ackerman Weld of Zurich, "Fabrik F. Hoeffleur Zurich-Seebach".  Here's another example, built by Paolo Soprani apparently:  Nice and rare RECORD button accordion / accordian! "C" system! | pianos, keyboards | City of Toronto | Kijiji  About all mine has in common with that one is the logo, though.  This one was designed by H. Ackerman, according to the seller.

The bass section of mine really caught my eye, with the damper for the bass reeds; it looks like someone worked on pianos.  Never seen the like before, was this commonly done?  This is a nice box, pinned reeds, with leathers that have been slashed crosswise - kind of like Swiss landsknecht fashions, come to think of it, which were slashed decoratively.  The treble keys unfortunately are made of some crummy plastic that falls apart, forming sinkholes in the middle before disintegrating entirely, so I'm turning out replacements from boxwood.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed damper
« Reply #1 on: July 27, 2015, 12:13:33 AM »

Interesting...
Is the purpose of the dampers to cut out the bass reeds altogether, a bit like some melodeons have a stop to remove the low fundamental reed from the basses? Or is it to stop the sometimes annoying 'twangy' vibration of the large reeds continuing after the button has been released?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Reed damper
« Reply #2 on: July 27, 2015, 07:40:01 AM »

It kills the bass and one set of middle reeds entirely, just like coupler mechanisms usually do.  Doesn't seem to have a halfway point you can actuate.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed damper
« Reply #3 on: July 27, 2015, 08:28:09 AM »

It kills the bass and one set of middle reeds entirely, just like coupler mechanisms usually do.  Doesn't seem to have a halfway point you can actuate.
OK - thanks.  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: Reed damper
« Reply #4 on: July 27, 2015, 08:40:12 AM »

It kills the bass and one set of middle reeds entirely, just like coupler mechanisms usually do.  Doesn't seem to have a halfway point you can actuate.

Wouldn't this solution have to be considered as quite favourable as the one reed left will receive the full amount of air then, not restricted by a shut windway?

Best wishes - Wolf
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Reed damper
« Reply #5 on: July 27, 2015, 09:01:38 AM »

Wouldn't this solution have to be considered as quite favourable as the one reed left will receive the full amount of air then, not restricted by a shut windway?

I don't really understand this, sorry.
In a conventional stop/switch mechanism, the slider cuts off the supply of air to the reeds to be silenced, but the remaining reed(s) will still receive a 'full amount of air'.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Reed damper
« Reply #6 on: July 27, 2015, 09:26:06 AM »

Is it a more complicated or a less complicated way of doing what the common sliders do?.  The only aadvantage I can see is that it reduces the potential for air leakage  and maybe gives a faster change than a slider??




george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed damper
« Reply #7 on: July 27, 2015, 09:30:53 AM »

Is it a more complicated or a less complicated way of doing what the common sliders do?.  The only aadvantage I can see is that it reduces the potential for air leakage  and maybe gives a faster change than a slider??




george

It almost certainly does not reduce the potential for air leakage. It will work well for the closing the valves on the outside of the block (for the suck reeds) but for the reeds with the valves on the inside (Push notes) it will prevent the reeds sounding but air will leak around reed and through the open valve.

blue eyed sailor

  • Melodeon renegade - partly reverted - Preciosa maniac
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
  • since folk process is running, take an active part
    • My Sound Cloud
Re: Reed damper
« Reply #8 on: July 27, 2015, 09:43:30 AM »

Wouldn't this solution have to be considered as quite favourable as the one reed left will receive the full amount of air then, not restricted by a shut windway?

I don't really understand this, sorry.
In a conventional stop/switch mechanism, the slider cuts off the supply of air to the reeds to be silenced, but the remaining reed(s) will still receive a 'full amount of air'.

My point (right or wrong) was that (at least in smaller boxes) the more voices you have the smaller the aperture for the wind supply will have to get. With these dampers you can keep resp. apply the wide cross-section of a one- or two-voice...
Logged
Hohners: 2x Preciosa Bb/Eb (tremolo / light swing) - Club IV Bb/Eb - Morino Club C/F
Presswood C/F - Pokerwork C - Verdi II (PA) - Lucia IV (PA) - Starlet (PA)

Weltmeister 509 G/C/F - Juwel (PA) -- Horch C/F (12 bass) -- Cantulia Bambi 26 (PA)
and: Castagnari Giordy G/C

be warned of my SC page, mainly concertina thus far

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Reed damper
« Reply #9 on: July 27, 2015, 05:06:26 PM »

That's a good point, Lester.  I dunno if I'm losing out on air much with the reeds dampened, like most all old boxes it could really stand revalving in the first place to work at its best.  It isn't bad though, good enough for practice's sake. 

I wonder about the pinned reeds, too.  It's nice to not have all that messy wax but wax certainly fills in any and all paths for air to escape.  And those pins are a pain to remove and replace, too.  And the felt underneath the reeds probably needs replacing just like bellows gaskets.
Logged

Etienne

  • Student in push-pull things
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
    • ça s'pousse et ça s'tire
Re: Reed damper
« Reply #10 on: July 28, 2015, 11:41:17 AM »

It's something in use for the registers of reed organs (can't find a good picture to illustrate...).
Logged
Old hohner and old Dedenis
http://pousser-tirer.blogspot.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal