Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Jacub Konrady Heligonka Restoration Projekt  (Read 14127 times)

0 Members and 1 Guest are viewing this topic.

HallelujahAl

  • Guest
Jacub Konrady Heligonka Restoration Projekt
« on: May 19, 2009, 06:36:06 PM »

Hi - some of you may be aware that I have a deep desire for a Helikon bass box. Thanks to Lars of this forum I now have such a beastie. Its going to need a bit of TLC and I thought I'd post a diary of how I'm doing and seeking advice from all you people who know a lot more about these things than I do. A number of pics of the box are posted on the link below
http://picasaweb.google.co.uk/HallelujahAl/JacubKonradyHeligonkaRestorationProjekt?feat=directlink

It's a two voice C/F box with wonderful deep growling helikon bass reeds. Tuning required will be fairly minimal - most of the work will be cosmetic, plus new pads and valves and bellows repair etc. I'm really looking forward to getting my hands into this one. Any advice will be gratefully received.

First things first - new felt onto the pallets - odd looking mechanism that doesn't look like it comes off and the pallets look like they're soldered onto the lever arms...???
AL
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #1 on: May 19, 2009, 09:10:52 PM »

Gorgeous big bass reeds.
The left hand mechanism looks as if it is held in with staples and the pallets do appear to be soldered on. Good luck with dismantling.
It doesn't look as if you will be able to detach the pallets and glue them all on a single sheet of felt.
I'd be tempted to make the new pads separately and slide them under the pallets before trying to detach the whole bass mechanism.
At least it's worth a try and would save a lot of work. You would have to adjust the pallets due to the extra thickness of the new pads but on this type of mechanism it just involves bending bits of wire!
As to the treble mechanism................................................................... :||:

With regard to the new photo in your avatar, you seem to have aged considerably in the last couple of weeks since I last saw you.
Are you sure the new BCC# is good for your health?  :o
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #2 on: May 19, 2009, 09:26:18 PM »

Are you sure the new BCC# is good for your health?  :o

OMG! He's started to turn into Jimmy Shand!  :o

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #3 on: May 19, 2009, 09:30:16 PM »

Quote
With regard to the new photo in your avatar, you seem to have aged considerably in the last couple of weeks since I last saw you.
Are you sure the new BCC# is good for your health?

Lol - yes, I think I have aged in recent weeks - nothing to do with the BCC# though. Actually its a pic of one of my all time favourite chromatic box players Gigi Stok - I just love the pose & the pipe of course.

Yes, going to put felts onto the pallets in situ - but got to make sure don't overload the mechanism.

But yes, the bass reeds are absolutely fantastic - sounds like a Tibetan call to prayer ;)

As to the avatar - I shall be growing a moustache in the coming weeks - then look out for a new avatar!
AL ;D
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #4 on: May 19, 2009, 09:57:04 PM »

Can't wait  ::)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #5 on: May 23, 2009, 04:18:33 PM »

Quote
Gorgeous big bass reeds.
The left hand mechanism looks as if it is held in with staples and the pallets do appear to be soldered on. Good luck with dismantling.

Ok this is the first problem - dismantling the mechanism is going to be a no no - as I'd simply never succeed without breaking it and my soldering skills are very primitive to say the least. So the re-padding/felts is going to be done with mechanism in situ.

Secondly - yes, lovely big - in fact ENORMOUS big bass reeds.  And it's these that I'm starting with. Any recommendations for getting the reeds clean? I'm going to take an old toothbrush to them and endeavour to clean them up a bit. But any other comments?
Thanks AL
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #6 on: May 23, 2009, 04:20:10 PM »

Maplin Electronics sell a 'polishing block'  designed for cleaning pcbs.   Its ideal for removing rust and dirt from the top surface of reeds. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #7 on: May 23, 2009, 04:55:19 PM »

See this Helikon is at least vaguely tasteful, I wish you joy of her :D Those bass reeds are bloody huge though :o Looking forward very much to pictures and sound clips when all is completed.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #8 on: May 23, 2009, 06:31:54 PM »

I attach pics of the bass reeds - at nearly 4" long each they're wonderful. Have brushed up with toothbrush and replace the leather valves and they look and sound a lot better already!

AL
Logged

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #9 on: May 23, 2009, 06:35:50 PM »

2nd Job this afternoon while listening to the Heineken Cup (Rugby - the proper game of football!) - start stripping the bellows. Have taken off all the old metal corners and am pulling off all the old papers in order to make ready for new leather gussets - new metal corners and then top paper. Any advice for a new boy?
AL
Logged

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #10 on: May 25, 2009, 03:52:15 PM »

Whilst contemplating the fluff in my navel and thinking about blogs, I came up with a Heath-Robinson type of Bellows Press which I guess I'm going to need when I come to finish off this bellows repair.
AL
Logged

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #11 on: May 26, 2009, 10:19:02 PM »

Having stripped away all the old paper from the bellows, removed metal corners, and cut away the old gussets with a VERY sharp knife the bellows look very sad indeed. They need brightening up!

So, does anyone know where I can get some fancy bellows papers from? The fancier the better - I have no taste as you know! I'm looking for something that would suit the Alpine & Bohemian nature of this box.

I have thought about going down to my local DIY store and getting a wallpaper - but I'd rather get the proper thing if I can!
AL
Logged

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #12 on: May 27, 2009, 08:52:11 PM »

Distressed Bellows!

As part of my refurbishment of the Heligonka I am stripping away the old paper and leather gussets from the bellows. They remain pretty sound, but look pretty distressed at the moment. I hope to be able to post before and after pics. But so far I only have the ‘before’

http://hallelujahal.wordpress.com/

Logged

Accordion Dave

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #13 on: May 29, 2009, 03:02:33 AM »

I looked at the pictures of your restoration project. I will be interested in the results. Please keep us updated with the progress.

Last summer, I started attempting to repair the corners of the bellows on my "A.Rosati" piano accordion. I need to get back to that project when I get some spare time. I enjoy working on my accordions outside on my front porch on a nice sunny day.

Approximately how much is 50 Euros in American dollars? I am continually on the lookout for a "distressed" Steirische Harmonika.
Logged

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #14 on: May 29, 2009, 08:02:00 AM »

Quote
Approximately how much is 50 Euros in American dollars? I am continually on the lookout for a "distressed" Steirische Harmonika.

I make it about $70 US plus a bit postage. So not much can go wrong with that  ;)

Yes, I just love the helikon bass, and it's something I've always wanted to do. I've restored a great many concertinas (English, Anglo, & Duets) but this is the first of the bigger boxes. I also make my own concertina bellows which I sometimes supply to the trade. But I've decided on this occasion to restore the bellows rather than make new as that way I'll learn more about 'how' they're made, and how they're supposed to operate.

I've ordered my supplies from Charlie Marshall at CGM www.cgmmusical.co.uk and so far have spent about another 25-30 USD on new leather gussets (corner diamonds), all new chrome metal corners, straps brackets etc. The felting and leather supplies I already have as well as gasket material (actually super-thin foam sheets that a friend gave me - his company supply this material into the aeronautics industry where it's used to soundproof and provide padding for military jet fighters and attack helicopters! -makes great bellows gaskets too  ;D)

I'm also linked in as a member over at the yahoo group 'buttonbox'
see http://launch.groups.yahoo.com/group/buttonbox/

This group deals with
the alpine diatonic accordion
commonly known as the
steirische harmonika, button box,
helikon accordion, heligonka,
ziach, or harmonika.


I've already received quite a lot of help and support - and it has lots of members in the US who are very knowledgable about steirische stuff. Why not join us?
AL

Logged

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #15 on: June 01, 2009, 08:06:46 AM »

Heligonka Progress
In Heligonka Restoration Projekt on June 1, 2009 at 8:06 am
Work proceeds at a steady pace – am almost halfway through a complete bellows repair job, and I’ve now managed to replace the valves on the bass chord reeds – so that means that the entire bass end should be sorted. Famous Last Words!!!

I decided in the end to replace the majority of the smaller reed valves with vinyl valves. The cost was only one small aspect of that decision – ready availability was another – and the fact that this is all a voyage of discovery for me at the moment. So vinyl it is – and I hope I don’t live to regret it. Johann Pascher over at Buttonbox has advised me to use leather if at all poss – but here I go again – making my own decisions!

The way I removed the reed plates was also an interesting conundrum. These reeds are pinned in – not waxed – so I removed the bottom pin from each plate and gently slid the reed plate out from under the remaining side pins – and after replacing the valves etc I slid them back again and replaced the bottom pin with a tiny woodscrew. This should make for future ease of removal.

There are an awful lot of reeds in one of these boxes aren’t there? I’m at times a little staggered at how some people actually manage to do this stuff for a living without going completely bonkers! The thought of tuning them all is quite frightening – thankfully they’ll not need much in that area. Fortunately I had Radio 4 on the BBC for company
Logged

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #16 on: June 09, 2009, 07:22:37 PM »

Hey! Bellows finished can be seen and heard at the blog
 Regards AL
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #17 on: June 09, 2009, 08:24:48 PM »

I’m at times a little staggered at how some people actually manage to do this stuff for a living without going completely bonkers!

In my experience, it helps if you're bonkers before you start.  :||:
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #18 on: June 09, 2009, 08:45:31 PM »

I’m at times a little staggered at how some people actually manage to do this stuff for a living without going completely bonkers!

In my experience, it helps if you're bonkers before you start.  :||:

Especially for bellows repairs, my least favourite job.  Tedious, repetitive, and boring, but requiring a high degree of attention to detail, and if you use slightly too much glue, or don't clean up completely you end up with a hollow cardboard brick.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

HallelujahAl

  • Guest
Re: Jacub Konrady Heligonka Restoration Projekt
« Reply #19 on: June 09, 2009, 09:38:44 PM »

YouTube clip of the bellows can be seen here
AL
 
I'm rather proud of my music note on the front of the bellows - all in very thin white leather (corner diamonds excess no less!)
The rest of the gonka still needs a lot of work - am going to deal with the reed valves and tuning next!

BTW hats off to both Rees and Theo - and no suggestion that either of you are actually bonkers!
 ;D
AL
« Last Edit: June 09, 2009, 10:45:18 PM by HallelujahAl »
Logged
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal