Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: adjusting thumb strap  (Read 3855 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
adjusting thumb strap
« on: August 12, 2015, 02:54:40 AM »

I know there are a lot of differing opinions on the matter, but I for one find it most comfortable playing with the thumbstrap.  All of my accordions have the thumbstrap attached to the keyboard in a fixed position using two rivets.  The one exception to this is an old HA113, where the thumbstrap is held in place with only one rivet, which allows it to move around.  It may seem odd to some, but I really like having a fixed thumbstrap rather than having one which moves around freely.  I would like to modify the thumbstrap on this instrument so that it is fixed it place.  Any recommendations on how to do this? I suppose it might make the most sense to drill (gasp!) another hole in the keyboard to attach another rivet? Anyone have much experience with this and able to guide me to success (and away from disaster!)?  Thanks.
Logged
C#/D player

Johnf

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
Re: adjusting thumb strap
« Reply #1 on: August 12, 2015, 04:35:49 PM »

My Louisiana made cajun one-rows have a thumb strap attached with two screws and a metal bracket. It stays in place, though I prefer it to be long enough that your thumb presses against the edge of the keyboard much like the Irish style. I also prefer the leather to be softer than the usual Hohner stiff strap.  Your should have no problem removing the screw on the HA113 and moving the strap, and re-attaching with two screws. Pre-drill the screw holes to prevent splitting the wood. You should also use a small metal strip with two holes or a couple of washers to hold it securely.
Logged
Austin Texas
C "LeCapitaine"
B/C "Double Ray"
Mandolin
Pennywhistle

Mike Gott

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 285
  • Melodeon and hairy arm
Re: adjusting thumb strap
« Reply #2 on: August 12, 2015, 04:53:56 PM »

Hello mselic, I too play a 1-row on thumb strap - I was brought up that way. Yes, just drill another hole in the keyboard! Make sure that it doesn't line up with any of the keyboard mechanism as your new fastening could catch it. I've used all sorts in the past as a fixing but some two-piece rivets that I had from doing a job on some leather have worked best as they are smooth so don't catch your thumb. Good luck with it.

My old C HA114 (which appears on my avatar) has a 1-rivet fited thumb strap, the thin leather strap itself has stretched so much that I just wind it 'round my thumb to secure it!

Mike
Logged
"Traditional music was for entertainment, it wasn't for a further education class" (Bob Davenport)

Rivington Morris, Bolton, Lancashire.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: adjusting thumb strap
« Reply #3 on: August 12, 2015, 06:04:41 PM »

yep, similar views here to those of john f above.
this presents you with a great opportunity to find what position and length of thumbstrap, as well as stiffness of material, suits your style.
i prefer a longer strap which allows my thumb to sit snugly against the edge of the fingerboard and easily reach button 1 without too much hand distortion in fast runs. (the reeds on button 1 draw on most of my single rows have been lifted a tone to suit irish tunes.)
as a general observation, i find most hohner thumbstraps too short and the anchor point usually lies level with button 5...too far down for me, button 4 does it!)
i'm not drilling a rivet out of a plastic fingerboard and then putting another one back...oh no!..neat, short, black bolt and nut with spring washer.
everyone has different styles, grips, holds... and different hands.
good luck.
 
« Last Edit: August 12, 2015, 06:20:22 PM by gettabettabox »
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: adjusting thumb strap
« Reply #4 on: August 13, 2015, 04:25:24 PM »

Pop rivets work a treat, I know I've done it with total success .
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: adjusting thumb strap
« Reply #5 on: August 14, 2015, 12:07:47 AM »

Thank you Nick. I have a pop riveter and was wondering if it was safe to use on my Hohner "C" one-row. I shall now give it a go, using my favourite (only) piece of soft leather which has proved comfortable on several boxes in the past.
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: adjusting thumb strap
« Reply #6 on: August 14, 2015, 01:45:13 AM »

Carefull with pop rivets if its a plastic keyboard, my father did his pokerwork a nasty 'just adjusting' the thumbstrap, a backing washer if close to the rivet diameter may help (stick over the rivet, opposite end to strap, so it rather than the kb is what the rivet expands into)

What pop rivets lack in linear hold they more than make up for in radial expansion and could easily split timber too  :o
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: adjusting thumb strap
« Reply #7 on: August 14, 2015, 06:10:34 AM »

Hmm, mine was a plastic keyboard but I did use a  fairly large metal washer to spread the load.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Johnniez

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
Re: adjusting thumb strap
« Reply #8 on: August 14, 2015, 11:07:17 AM »

Carefull with pop rivets if its a plastic keyboard, my father did his pokerwork a nasty 'just adjusting' the thumbstrap, a backing washer if close to the rivet diameter may help (stick over the rivet, opposite end to strap, so it rather than the kb is what the rivet expands into)

What pop rivets lack in linear hold they more than make up for in radial expansion and could easily split timber too  :o

Screw together rivets work very well. I have a bunch of them . I have Ha-114'w D and C  with two rivets holding the thumb strap..
Logged
Every Day Is A Great Day
Some Are Better Than Others

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: adjusting thumb strap
« Reply #9 on: August 14, 2015, 01:51:42 PM »

Carefull with pop rivets if its a plastic keyboard, my father did his pokerwork a nasty 'just adjusting' the thumbstrap, a backing washer if close to the rivet diameter may help (stick over the rivet, opposite end to strap, so it rather than the kb is what the rivet expands into)

What pop rivets lack in linear hold they more than make up for in radial expansion and could easily split timber too  :o

Seconded - for ability to cause damage - been there, done that. I'd also baulk at drilling the ruddy things out again if I wanted to in the future, and would therefore use something of the "nut and round-headed slotted or hex head setscrew" type; easy to install, easy to remove, dab of black gloss to disguise.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: adjusting thumb strap
« Reply #10 on: August 14, 2015, 11:57:17 PM »

Hmm, mine was a plastic keyboard but I did use a  fairly large metal washer to spread the load.

That's the key Nick, had you just whacked a pop rivet into a reasonably tight hole in the plastic it might have led to a different outcome  ???

In which instance what would you follow up with to overcome the damage ? Obviously you'd use a bifurcated copper rivet as they don't spread even more and turn a split into a chunk detatching  :o - must be a Polish thing, as a halfbreed I tend to err on the side of caution, having said that, as a kid I was expected to learn the violin at school, on coming home with said instrument in a few minutes he had both sized up that it was missing a soundpeg, whittled one and fitted it using two bits of string with slipknots, don't think he'd played one but had seen it done in his youth........
He's been gone a few years now and never really came to terms with diatonics, his Pokerwork ended up filled with cannibalised PA reeds but I eventually found most of the originals jumbled together in an envelope - shortly before making the aquaintance of a certain Mr Gibb who turned it back into a musical instrument of recognisable parentage and tuning!
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: adjusting thumb strap
« Reply #11 on: August 15, 2015, 12:11:02 AM »

personal preference when playing Hohner on row was to remove poor quality original and replace using meccano.

Washer on inside with bolt passing through to outside; washer outside followed by leather thumbstrap; all held in place with washer followed by lock nuts.

This allowed reasonable movement and good options for replacement.
Logged
Semper idem, sed non eodem modo

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: adjusting thumb strap
« Reply #12 on: August 15, 2015, 12:22:17 AM »

Hmm, mine was a plastic keyboard but I did use a  fairly large metal washer to spread the load.

That's the key Nick, had you just whacked a pop rivet into a reasonably tight hole in the plastic it might have led to a different outcome  ???

In which instance what would you follow up with to overcome the damage ? Obviously you'd use a bifurcated copper rivet as they don't spread even more and turn a split into a chunk detatching  :o - must be a Polish thing, as a halfbreed I tend to err on the side of caution, having said that, as a kid I was expected to learn the violin at school, on coming home with said instrument in a few minutes he had both sized up that it was missing a soundpeg, whittled one and fitted it using two bits of string with slipknots, don't think he'd played one but had seen it done in his youth........
He's been gone a few years now and never really came to terms with diatonics, his Pokerwork ended up filled with cannibalised PA reeds but I eventually found most of the originals jumbled together in an envelope - shortly before making the aquaintance of a certain Mr Gibb who turned it back into a musical instrument of recognisable parentage and tuning!

great thing to have the responsibility of an instrument with known provenance.


personal preference when playing Hohner on row was to remove poor quality original and replace using meccano.

Washer on inside with bolt passing through to outside; washer outside followed by leather thumbstrap; all held in place with washer followed by lock nuts.

This allowed reasonable movement and good options for replacement.

couldn't have described it better. (forgot washer on outside, but used spring washer on inside allowing tightening with strap tension from outside!)
« Last Edit: August 15, 2015, 12:32:59 AM by gettabettabox »
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: adjusting thumb strap
« Reply #13 on: August 19, 2015, 02:01:55 AM »

What's the best way of etting the old rivets out from the plastic keyboard of my HA110 please?  :|bl
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: adjusting thumb strap
« Reply #14 on: August 19, 2015, 07:57:40 AM »

Take key board off.
Grip visible rivet heads in a vice
Drill out from inside.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: adjusting thumb strap
« Reply #15 on: August 19, 2015, 08:00:33 AM »

Take key board off.
Grip visible rivet heads in a vice
Drill out from inside.

And if you are not replacing the strap use these to make good afterwards

http://www.diy.com/departments/bq-m4-screw-cap-dia4mm-pack-of-20/245420_BQ.prd
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal