Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed slow to start...  (Read 1936 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Reed slow to start...
« on: August 29, 2015, 09:11:36 PM »

I am in the process of test driving a Gaillard Saphir.  It is fitted with Binci reeds. This box has a dreamlike response, and the reeds all sound with minimal pressure allowing for great dynamics, playable at a whisper, and also quite loudly, with minimum bellows pressure.  That is, all except one note on the pull, which seems to take its time "warming up" and sometimes doesn't play at all, particularly if being played at the same time as a chord or bass note.  What is going on here? Does that reed need to be replaced?  Retuned? Refitted?  I am certainly not about to agree to the purchase of the box until I know.  Also, it sounds as if one of the bass/chord combis is slightly out of tune, and lastly, though not as dire, the appears to be a spot of oxsidation on the grille.  Please advise on the reed issues, and I would also appreciate any advise concerning that darn spot.  Are Galard's grilles brass as they appear and maybe a brass cleaner would work?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed slow to start...
« Reply #1 on: August 29, 2015, 09:22:47 PM »

If it is the one that the Button Box is selling just ask them to put those things right before you conclude the deal, I'm sure they won't mind.   It is the kind of work that any box retailer would expect to fix, included in the purchase price of the box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed slow to start...
« Reply #2 on: August 29, 2015, 09:23:04 PM »

Sounds as if the reed needs to be reset, that is the amount the reed is above the plate, too small a gap and the reed may not always speak (it chokes) or set too high making it slow to speak and wasting a lot of air.

Yours sound as if it need lifting a gnats nagger (sorry about the technical terms), a 15 second job for a fettler.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed slow to start...
« Reply #3 on: August 29, 2015, 09:27:17 PM »

It could also be a valve problem, or some contamination on the reed.  Almost impossible to diagnose exactly from a distance which is why I suggested asking the seller to fix it, and tune the bass that is out. Neither are difficult for someone with the right skills.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Reed slow to start...
« Reply #4 on: August 29, 2015, 09:55:02 PM »

with all the talk of ''euro sessions'' on the whitby thread, i was wondering what a 'gnat's nagger' would be in metric?   (:)
Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Reed slow to start...
« Reply #5 on: August 29, 2015, 11:08:22 PM »

If it is the one that the Button Box is selling just ask them to put those things right before you conclude the deal, I'm sure they won't mind.   It is the kind of work that any box retailer would expect to fix, included in the purchase price of the box.

It is.  And aside from what was mentioned, I never dreamed a box could be so lovely to play.  That said, the staggered basses and the fact that there are so many of them will take getting used to.  I'm hoping to get some more time with it today and tomorrow, so far because if work, I've only had about 30 min playing time.

I guess what surprises me is these things weren't sorted before sending out.
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reed slow to start...
« Reply #6 on: August 30, 2015, 01:24:04 AM »

It's actually a gnat's NADGER ... not nagger.

And can I congratulate you on the purchase of a wonderful instrument - regardless of any slight issues it may have.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed slow to start...
« Reply #7 on: August 30, 2015, 01:38:51 AM »

with all the talk of ''euro sessions'' on the whitby thread, i was wondering what a 'gnat's nagger' would be in metric?   (:)

Depends if you measure with warm or cold calipers  ;)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Reed slow to start...
« Reply #8 on: August 30, 2015, 03:32:48 AM »

It's actually a gnat's NADGER ... not nagger.

And can I congratulate you on the purchase of a wonderful instrument - regardless of any slight issues it may have.
.

Ok I'll bite.  What on God's earth is a gnat's nadger???

And thanks Squeezy.  Having been playing on a 1938 Hohner III BS for some time now, I guess I never knew a box could be played so easily without pain and struggle.  Almost plays itself.  I must admit though that I kind of miss the Clubayout, especially on the pull.

Logged

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Reed slow to start...
« Reply #9 on: August 30, 2015, 03:34:20 AM »

Anyone have any idea what to do about that darned spot on the grille?? You can zoom in on it on the pic on the Button Box's website.

http://www.buttonbox.com/button-accordions-in-stock.html
« Last Edit: August 30, 2015, 03:37:16 AM by Grape Ape »
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Reed slow to start...
« Reply #10 on: August 30, 2015, 09:07:51 AM »

It's actually a gnat's NADGER ... not nagger.

And can I congratulate you on the purchase of a wonderful instrument - regardless of any slight issues it may have.
.

Ok I'll bite.  What on God's earth is a gnat's nadger???

And thanks Squeezy.  Having been playing on a 1938 Hohner III BS for some time now, I guess I never knew a box could be played so easily without pain and struggle.  Almost plays itself.  I must admit though that I kind of miss the Clubayout, especially on the pull.
Just for the record Frank, it's the reproductive organs of Florida's favourite bird.... The Mosquito !!  8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Reed slow to start...
« Reply #11 on: August 30, 2015, 09:22:29 AM »


Ok I'll bite. 


Very appropriate...    >:E
Logged
Tuner/repairer, now retired.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal