Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Keyboard conversion  (Read 1058 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Keyboard conversion
« on: August 31, 2015, 11:09:31 PM »

How are keyboards converted from stepped to flat?  The other night I made some wooden spacers for my Paolo BCC# to get the buttons closer together, if not on the same plane - thin spacers for the middle row, thicker ones for the outside one.  The buttons unscrew from the ebony dowels that are attached to the key arms, you see.  For the middle ones it looks like the screws on the buttons will be long enough to grip the ebony, for the outside row it'll be a bit trickier.  I bought some size 1 wood screws to mate the dowels and the spacers - I'm thinking I can cut off everything on the screws but the threads and attach the two that way.  Or glue them together?

Of course this might be far from industry standard practice, do most who convert these boxes bend keys to get the desired effect?  I really don't want to do that, spacers would be reversible for one thing, which I'm always in favor of, also I don't want to screw things up, or monkey about with bending keyboards - the arms on these things are really frickin' thick, too. 

So, any advice on how to go about this?
Logged

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Keyboard conversion
« Reply #1 on: September 02, 2015, 06:03:07 AM »

Installed those wood spacers, with paper thin leather washers to cut down on clacking.  All of the spacers are the same thickness, I decided not to try attaching thicker ones for the outer row, too much bother.  Works OK, I do most of my playing on the inner row anyway so not worried about how the outer row is a titch lower.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Keyboard conversion
« Reply #2 on: September 02, 2015, 09:36:39 AM »

Some pictures would help, I can't quite visualise what you are doing.
I've not done this myself, but I've seen it done, and it's always been combined with changing from mushroom shaped buttons to plan buttons set lower.  To do this you will need to replace all the posts that the existing buttons screw into, with shorter ones that new buttons can be glued onto, and you will also need to make a new, flat, top plate.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Keyboard conversion
« Reply #3 on: September 02, 2015, 05:53:06 PM »

I made discs with holes drilled in the center, the screws from the buttons pass through these into the posts.  You can see these in the pic although it's a bit out of focus.  Now the middle row is only slightly lower than the inner.  I used the same thickness of disc for the outer row as anything thicker would need to be glued onto the posts, or screwed on somehow, or something.  I wanted something that would make it slightly easier to play, especially the grace notes in rolls.  It's all a bit of a moot point as I'm having a CC#D built with flat keyboard which will be here next month.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal