Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: loose valve pallet  (Read 1831 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
loose valve pallet
« on: September 10, 2015, 12:35:21 AM »

I have noticed a couple of loose valve pallets on my Hohner HA114.  It appears the pallets themselves are attached to the key rods (forgive me if I am using incorrect terminology) with wax and a circular "tab" of felt or paper or something on top.  Most of them are fine, and everything works, but the couple that are loose will occasionally shift a little and then not make a proper seal when closed.  It seems that it wouldn't take much to fix it, but I am inquiring as to the best course of action here.  I one day intend on having a professional overhaul (if needed, such as replacing the felt on pallets should they start leaking eventually), but I am looking for a relatively pain-free fix here without setting myself up for headache down the road (ie. not glueing them in place!)  Thanks!
Logged
C#/D player

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: loose valve pallet
« Reply #1 on: September 10, 2015, 12:48:31 AM »

A gentle scrape off of the old stuff with the back of a knife and a carefully applied blob from the hot glue gun cured mine - easily reversible so should not cause a proper fettler to grind their teeth.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: loose valve pallet
« Reply #2 on: September 10, 2015, 01:25:32 PM »

If they are actually waxed (not glued) then a touch with a soldering iron for just long enough to start the wax melting should be enough to keep it going until major overhaul time.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: loose valve pallet
« Reply #3 on: September 10, 2015, 01:44:45 PM »

Unlikely to be wax if the cloth patches are still in place. Hot glue I'd the answer.
« Last Edit: September 10, 2015, 09:20:42 PM by Lester »
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: loose valve pallet
« Reply #4 on: September 10, 2015, 07:03:57 PM »

Not sure what joy glue is? I will attempt to remedy using a small amount of glue of some kind.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: loose valve pallet
« Reply #5 on: September 10, 2015, 07:22:38 PM »

Do not be tempted to put glue into the groove under the arm.  That will make it difficult on future to remove the pallet for re-facing, or other reasons. A small patch of cloth or strong paper glued on top like the original circles.  Any ordinary glue will be ok, but I would not use epoxy (too strong) or cyanoacrylate (will run under the arm). Pva/white wood glue is fine.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: loose valve pallet
« Reply #6 on: September 10, 2015, 09:21:27 PM »

Not sure what joy glue is? I will attempt to remedy using a small amount of glue of some kind.

Joy glue is what the autocorrect on my phone thinks I meant when I typed hot glue.   :o

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: loose valve pallet
« Reply #7 on: September 10, 2015, 10:06:36 PM »

Don't ask where Lester bought his phone... :o
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: loose valve pallet
« Reply #8 on: September 10, 2015, 10:14:03 PM »

Don't ask where Lester bought his phone... :o

China as it happens, they make infinity better phones than they do melodeons  ;)

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: loose valve pallet
« Reply #9 on: September 10, 2015, 11:39:56 PM »

The melodeon restorer and tuner Martyn White gave me a good tip for replacing the small fabric disks for attaching the pallets to the pallet arms:

Use some fine linen or cotton -  an old handkerchief (remember those?) is ideal. Soak the fabric in a dilute solution of white PVA glue and water - approx. 20% glue to 80% water is about right. Smooth out the wet fabric and allow to dry by hanging on a washing line. The result will be a stiffened fabric which is easily cut into disks using a large diameter leather punch. The PVA stiffening prevents the fabric from collapsing or distorting when punching out the disks. Alternatively you could use sharp scissors to cut disks or small squares, though that gets a bit fiddly.

To secure the pallets to the arms, first ensure both are clean and free from old glue residue. Lay the pallet arm in the pallet groove. It will be kept there by the spring pressure. Add some (undiluted) PVA or animal glue to one side of the fabric disk and press into place over the pallet arm and pallet. When the glue has set, that will be sufficient to hold the pallet securely. As Theo says, glue in the groove makes it hard to remove the pallet at a future stage.

This method is good if you are restoring a vintage instrument and you want (for aesthetic reasons) to keep to the original methodology.

However, as Lester has said, a small, tidy, blob of hot melt glue is a great alternative to the above method for run-of-the-mill boxes (Hohner Pokerwork, etc.) in which case the fabric disk can be dispensed with.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: loose valve pallet
« Reply #10 on: September 11, 2015, 01:09:17 AM »

Thats a great tip for fray free cloth cutting Steve - a dip in the size beck of years gone bye  ;)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal