Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pallets  (Read 2180 times)

0 Members and 1 Guest are viewing this topic.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Pallets
« on: September 13, 2015, 02:25:19 PM »

I am replacing the pallets on my old Dedenis, and was looking at the Hohner C shop, where they offer replacement ones, at a reasonable price. My problem is, I don't know the measurements of the pallets they sell. Can anybody tell me what, (if any) Hohner pallets would fit? The ones I am replacing, measure 38 mm by 17mm.

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Pallets
« Reply #1 on: September 13, 2015, 02:52:58 PM »

Charlie Marshall sells Hohner action assemblies ready made up:
http://www.cgmmusical.co.uk/CGM_Musical_Services/Hohner_Parts.html

I'm not sure whether he sells replacment Hohner pallets on their own, but he might. It's worth giving him a call; he might well be willing to measure the pallets on the made-up assemblies.
07799 153 216

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pallets
« Reply #2 on: September 13, 2015, 04:00:48 PM »

I wouldn't buy Hohner pallets unless they have thicker facings than those usually fitted to their instruments.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Pallets
« Reply #3 on: September 13, 2015, 04:57:48 PM »

Charlie also sells individual pallets http://www.cgmmusical.co.uk/CGM_Musical_Services/Felt_Leather_Pallets.html but I've no idea what sort of quality, size or material they are. Replacement wooden pallets are not difficult to make if you have a sound one to take measurements from and you are a reasonably careful worker with simple woodworking tools. I've made quite a few with just a fine backsaw (sometimes called a "gentleman's saw" - like a tenon saw but smaller and with much finer teeth) and a sheet of glass with abrasive paper glued to it (though a belt sander is admittedly quicker, if rather more prone to taking off too much timber and the odd fingertip if you're not careful!)

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Pallets
« Reply #4 on: September 16, 2015, 08:41:08 AM »

Out of curiosity - why replace the old ones? A good clean, new facing, and perhaps new leather sampers is the usual trick. Unless, ofcourse the old ones are missing in great numbers or otherwise non-suitable.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pallets
« Reply #5 on: September 16, 2015, 09:25:15 AM »

If the old pallets have to be replaced I would suggest making new ones.  The dimensions have to be correct - length width and thickness, off the shelf items from another maker might not be quite right.  If too thick or thin the lever geometry will be different and you will have to make adjustments by bending the levers.  Length and width have to be correct too so that there is sufficient overlap around the holes, but pallets don't contact each other as they move.

Much easier to re-use the old ones.  If they are slightly warped the working surface can be sanded flat, then be re-faced with some new felt/leather.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Pallets
« Reply #6 on: September 16, 2015, 08:30:42 PM »

I am replacing the pallets on my old Dedenis, and was looking at the Hohner C shop, where they offer replacement ones, at a reasonable price. My problem is, I don't know the measurements of the pallets they sell. Can anybody tell me what, (if any) Hohner pallets would fit? The ones I am replacing, measure 38 mm by 17mm.

John
I am looking at a treble pallet removed from Hohner press wood and they measure 17mm x33mm
pallet removed from hohner 1040- 2 voice 4 bass button 10 butoon and tey are 17mm x 42mm
pallets removed from hohner ha114- 2bass 4 stop 10 button and they are 17mm x 69mm   (:)
« Last Edit: October 06, 2015, 11:50:38 PM by invadm »
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Pallets
« Reply #7 on: September 16, 2015, 09:28:52 PM »

The old pallets cannot be cleaned up. The old material is 'welded' on, It is also very thin, and hard to deal with.

John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pallets
« Reply #8 on: September 16, 2015, 10:07:46 PM »

Take a sheet of medium grit abrasive paper, glue it onto a sheet of 3/4" plywood, mdf or chipboard. Rub the pallets until the facing is removed.
Take care not to sand your finger ends!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Pallets
« Reply #9 on: September 16, 2015, 11:37:16 PM »

The old pallets cannot be cleaned up. The old material is 'welded' on, It is also very thin, and hard to deal with.

Take a sheet of medium grit abrasive paper, glue it onto a sheet of 3/4" plywood, mdf or chipboard. Rub the pallets until the facing is removed.
Take care not to sand your finger ends!

Yes - that's how I do it too! Just take care not to allow the pallets to rock whilst sanding, otherwise you will end up with a convex surface, causing subsequent air leakage problems.

Then replace the facing using the composite felt and Persian leather sold by Charlie Marshall. It's excellent stuff.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Pallets
« Reply #10 on: September 21, 2015, 06:55:08 AM »

I have used two different "beds" to flatten wooden objects ranging from pallets to reedblocks, to fingerboards. I use an inverted #8 cast iron jointer plane which is 24 inches long as a base. I hold sandpaper of various grits, depending on how much material is to be removed, in place with strong magnets salvaged from old computer hard drives. I hold the wooden parts, or temporarily attach them to a larger handle and sand lightly. I alternate the leading edge of the piece being sanded after  an equal number of strokes to keep the face flat and not tapered. I also sand with the grain. I have a 50mm thick piece of glass which has no optical distortion. I use this as a bed for sanding over when more precision is needed than can be achieved using the cast iron plane bottom. I have used similar methods to flatten warped bellows frame edges on old melodeons which are attached to the end plates with screws, rather than the more modern pin attachment.
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal