Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Club ii Celluloid repair  (Read 1261 times)

0 Members and 1 Guest are viewing this topic.

benammiswift

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 158
  • Squeezing for Derbyshire
    • benammiswift.co.uk
Hohner Club ii Celluloid repair
« on: October 15, 2015, 05:18:34 PM »

Hi there everyone

I have recently taken the plunge and bought an old hohner club ii to restore and on the bass side the celluloid seems to have lifted from the wood, I was wondering how I would go about fixing this and how I make sure the celluloid looks flush with the bellows frame once re-glued to the wood. Also what glue should I use for this?

Thank you for any help in advance

Benammi
Logged
Castagnari Handry 18

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Hohner Club ii Celluloid repair
« Reply #1 on: October 16, 2015, 07:14:22 PM »

If the repair is on a flat section, you can squirt some runny superglue in and then press it down.  Put a plastic bag over the area before committing your hand pressure to it or you'll need a scalpel to get your fingers free again!  I have a problem on the curved section around the grille and the superglue simply doesn't have enough grab, it springs off again.  Modern formulations are not as strong as the original.

Rob.
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Hohner Club ii Celluloid repair
« Reply #2 on: October 16, 2015, 07:22:53 PM »

Different grades of Superglue,Rob....
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner Club ii Celluloid repair
« Reply #3 on: October 16, 2015, 08:24:49 PM »

There have been other threads on this. When the celluloid was first put on it was in a plastic state from a solvent tank, I understand, and so could be moulded to the case shape. I don't know what adhesive was used in addition.

Gentle heat has been suggested, with the proviso that it is rather flammable...
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Club ii Celluloid repair
« Reply #4 on: October 16, 2015, 11:25:35 PM »

The original adhesive was most probably scrap celluloid dissolved in acetone.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal