Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Limiting keyboard travel - again  (Read 1079 times)

0 Members and 1 Guest are viewing this topic.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Limiting keyboard travel - again
« on: October 30, 2015, 02:19:12 AM »

A well worn topic I know...

Thanks to this forum I've acquired a number of instruments, mostly Hohners, all lovely. However I've not yet had the pleasure of owning a standard Pokerwork. Until today. I've bought a C/F Pokerwork, made in Germany, currently owned by a superb Canadian player named Julie Simard. She sent me an iPhone recording of the instruments, in all its wet tuned Pokerwork glory. Just want I wanted, the original Hohner sound. The instrument looks immaculate.

Along with the sound, another original feature will no doubt be included: buttons which disappear into the keyboard. I've addressed this issue a few times, with a wooden rod under the keys for a single row a 1040, following picture instructions from Theo, more recently with felt under the keyboard for a Bb/Eb Erika. The latter was fairly straightforward, as the top keyboard cover is removable on the Erika.

Due to my so-so woodworking skills, I'm inclined to try felt under the keys for this new Pokerwork, when it arrives. Any pointers on this? In particular, is it possible to get the keyboard cover back over the keys once the felt is in place?

By far the bast keyboard limiting job I've seen is on a Erica I got from Theo a while back. Each key is limited precisely, which makes the instrument much faster and easier to play. Based on this, I'd consider getting an expert to do the job for me on this Pokerwork, perhaps bushing the bass buttons at the same time. Unfortunately I'm in Australia, our button accordion fettlers have retired...


Logged
Harmonica Player
Just starting with the Box

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Limiting keyboard travel - again
« Reply #1 on: October 30, 2015, 07:01:44 AM »

Take the keyboard off the Erica and you can see how it's done - a strip of soft wood screwed into the case just below where the keyboard sits.
I don't like using felt in the keyboard of Pokerwork/Erica.  If you put in enough felt then it is very difficult to get the keyboard on or off.  Another way is to replace the whole keyboard with the one made by Acorn Instruments.  This has a removable back which makes it simple to add and adjust padding under the buttons.
« Last Edit: October 30, 2015, 07:04:04 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal