Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Advice on converting a Club box, please.  (Read 4928 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Advice on converting a Club box, please.
« on: November 04, 2015, 05:15:40 PM »

I'm slowly venturing into working on the lesser boxes in my collection.  I started with re-waxing a Preciosa, so I intend to work slowly and carefully to avoid major cock-ups!  But there are aspects of the work which require advice based on experience - that's what prevents irreversible mistakes, I hope.

My first challenge will be to de-club a tatty but rather nice HEs Club.  Hopefully the low pitch will allow more room to learn how much scratching tunes to the pitch required!  But as I'm only planning to de-club, only the Gleichton needs to be tuned on the treble side.  I've heard it said that a reed can only take a semi-tone pitch change before the tone suffers and the reed tongue becomes prone to fracture.  So the question is, do I need a couple of new reed plates to remove the Gleichton and if so what is recommended to best match the original tone?

A second consideration will be to change the bass Db to Ab.  I presume some of the reeds will have weighted tips, which should offer greater scope for tuning, but again is this conversion feasible without fitting new reed plates?  I guess I would accept a different chord inversion if that makes it possible.  Of course, a set of Ab reeds from a period donor box would be ideal, but most are worth restoring or the reeds kept as a set.

I'd value any advice from those with first-hand experience (you know who you are!).  My long term objective is to convert a C/F Club II Viktoria to D/G and much of the advice is common to both projects.  The Viktoria is a nicely built box and would make a very handy 2 1/2 row if converted - although I think converting to 12 bass is beyond me!

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Advice on converting a Club box, please.
« Reply #1 on: November 04, 2015, 06:21:09 PM »

This would all be fine if I had read the question. My answers are for a C/F not a Bb/Eb  :-[

The C/C Gleichton can be filed up to C/D with some care, I have done it on multiple boxes with no problems.

As to the chords the box will currently have

Eb pull  consisting of Bb3 - G4 - Eb4
Bb push consisting of  Bb3 - F4 - D4

So the G4 needs to go down to F4 easy enough with solder
And Eb4 needs to go down to D4, again, easy enough with solder

Can't remember how to do the basses without going out to the workshop.

On mature reflection the basses look hard as they have to go from Eb up 7 semi-tones to Bb. IIRC the big reed has a large tip weight which can be removed but the smaller reed needs to be replaced.
« Last Edit: November 04, 2015, 06:36:08 PM by Lester »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Advice on converting a Club box, please.
« Reply #2 on: November 04, 2015, 06:38:02 PM »

Although the facts in my previous post are wrong the general principles will apply, ie glieighton possible, chords easy, basses harder.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Advice on converting a Club box, please.
« Reply #3 on: November 04, 2015, 06:40:09 PM »

What Lester said but everything down a tone as he has quoted for a C/F box whereas yours is Bb/Eb.

Oops, just read your post  ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: Advice on converting a Club box, please.
« Reply #4 on: November 04, 2015, 09:49:30 PM »

I'm considering the same myself. I have a Bb/Eb Erika. It plays nicely, but the Club tuning is beyond me.

I'm thinking of just tuning up the treble gleichon button, i.e. raising it a tone. I've had a lot of experience tuning harmonica reeds, and have the specialised tools to do this. Presumably they'll work also for accordion reeds, except that I'll be filing steel instead of brass.

My question is this: can I do this job (i.e. file the tip of the reed to raise it a tone) while the reed is still in place? I'm not sure I'm up to removing the reed then re-waxing it again.

Another alternative would be sending it to an expert and having it de clubbed fully, with new pallets and a tune-up thrown in. An attractive albeit far more expensive option. Unfortunately I'm in Australia, our local button accordion fettlers have retired..
Logged
Harmonica Player
Just starting with the Box

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Advice on converting a Club box, please.
« Reply #5 on: November 04, 2015, 09:54:40 PM »

My question is this: can I do this job (i.e. file the tip of the reed to raise it a tone) while the reed is still in place? I'm not sure I'm up to removing the reed then re-waxing it again.

Unfortunately the reeds you need to raise a tone are the 'inside reeds' and in my opinion you would need to remove the reeds to enable the filing required.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Advice on converting a Club box, please.
« Reply #6 on: November 04, 2015, 10:29:15 PM »

Lester is definitely correct.  But waxing a reed is the easier part of the job.  Waxing may be an unfamiliar skill, but you should be quite capable of doing it.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Advice on converting a Club box, please.
« Reply #7 on: November 04, 2015, 10:48:21 PM »

Can I just say this? My favourite box, apart from my new Castagnari, is my 1930 Bb/Eb Club 1, de clubbed. So I can recommend the end product.
It needs a bit of fettling, but it is such a sweet wee box.


John.
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Advice on converting a Club box, please.
« Reply #8 on: November 05, 2015, 01:02:48 AM »

OK, that gives me the scale of work involved, which I should have known had I not been too lazy to open the box up and look for myself!  Blame it on my needing to get ready to go to work...  The question still remains as to whether I should be looking for old reeds to match the originals or whether a new reed plate would be unnoticeable?  I guess if I only have to change out the upper octave bass reed, the grunt of the fundamental reed should mask any slight change in tone!

Based on my past performance, I should get round to starting work sometime in the next couple of years - planning, replanning and chickening out regularly til the fateful day.  I actually enjoy it once I get started though.

I really like the HEs for its tone and also the quality of construction of these older Clubs.  I'd like to use it in the ceilidh band for waltzes - somehow a D/G two voice is a little brash for a romantic moment.  My actual favourite at the moment is a semi-declubbed Viktoria in C/F.  The helper row seems perfectly planned and is so much more accessible as my hand span matches my attention span (very little).  It would be lovely to be able to use it as my main box, but fashion dictates that that should be a D/G.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Advice on converting a Club box, please.
« Reply #9 on: November 05, 2015, 10:10:43 AM »

Is it really HEs? That would be B Eflat in English,  club boxes are usually BEs in German BflatEflat in English.
 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Advice on converting a Club box, please.
« Reply #10 on: November 05, 2015, 12:05:37 PM »

Having problems posting as access to the site is flaky at the moment.  Yes Theo you are right, of course, I thought it quicker and easier to type using the German nomenclature, but the wrong letters came into my head (nothng new there according to the spellchecker).

The whole subject of reed selection and matching has long been the preserve of the accordin maker and repairer.  Players were not expected to take an interest in the workings of the box.  I've been offered advice that I need a Hohner reed - I shall ignore any further advice from that source as the variety of scale lengths available from Hohner over the years makes that statement as useful as a chocolate fireguard.  If you don't believe me, take a look at the treble reeds in my Viktoria and compare with the Preciosa!  I guess when I get around to it, I shall have to measure the plate and look around for a suitable replacement.

It does impinge on several other lines of enquiry, each with their own threads.  I believe that reed block design is, in most cases, purely a question of making a straight-sided box, tapering to accomodate the range of lengths of the reed set.  The idea of an optimized chamber for each reed just doesn't wash when the whole block is made from a few straight strips of wood - but the mismatch may explain why accidentals on the end of the row can have such a different tone.  I've also heard of an old Hohner Morino being re-reeded with Italian reeds with disastrous results - perhaps the reedblocks just didn't suit the new reeds.  Even if the length of chamber is adjusted, it could perhaps be too deep?

The issue of scale length vs tone seems to be that the predominant effect is that a long reed will have a stronger fundamental giving a mellow tone whereas a shorter reed for the same pitch will give stronger harminics, giving a more brash, strident tone.

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Advice on converting a Club box, please.
« Reply #11 on: November 05, 2015, 12:19:09 PM »

Re chamber sizes.

I have recently modded two Castagnari Lillys to 4th button start. Obviously the moves all the reeds in to a smaller chamber size. But I discovered when doing the job that the reeds, in their original positions, were too small for the chambers and Castagnari had bodged overcome this by applying what looked like masking tape over the gap then waxing over the top.

Both customers said their boxes were "better' after moving the reeds and thus better matching the reeds to the chambers. I assume Castagnari do this so they only need one carcass for D/G, C/F, G/C etc. 

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Advice on converting a Club box, please.
« Reply #12 on: November 07, 2015, 05:25:33 PM »

I must say I'd be livid to find such a bodge in a box the price of a Lilly!  I was thinking that to reduce the length of a chamber one should glue a strip of wood across one end thus reducing the length and the volume of the chamber, but what kept coming to mind is the way that the top few (high pitch) chambers of some blocks have a ramp glued in which reduces the volume still further.  Does that help them sound, I wonder?

As my Chinese Pokerwork was sitting on the table, I opened it up and slipped a strip of paper under each reed bank in turn and mapped the current "tuning".  The results reinforced my assertion that the reeds were not tuned at all during manufacture.  In fact it sounds so awful it is probably the best box to learn tuning on - there really is nothing to lose!  I was disappointed to discover that the iStroboSoft tuner for Android does not offer tuning in Hz, only cents deviation.  Bearing in mind that it says the whole box is sharp (including basses) does that mean I should calibrate the tuner before starting?  It seems to require an input of 440Hz to calibrate and I'm stumped to think what I can use...  It says my tuning fork is 1 cent sharp, but won't accept it as a calibration input.  Any tips on using the tuner would be most welcome.

Meantime I went through the exercise of calculating the actual offsets required to achieve Ian's preferred Viennese tuning (in cents to give 2Hz offset).  Having entered them into an Excel sheet, perhaps I should plot them as a graph of offset against pitch to look for any gross errors although they all look about right.  I think I shall expand the pitch in Hz table I downloaded to use formulae to do the whole range.

Rob.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Advice on converting a Club box, please.
« Reply #13 on: November 07, 2015, 05:34:03 PM »

Why not set the base frequency* to A=439 and tune one set of reeds and then set it to A=441 and tune the other side. This, to my fevered brow, would give you 2Hz all the way up the box centred on A=440 pitch.

*Do this using an option under the three slider thing bottom left of the screen.

Or, on further investigation, long press the cents label and it will change to hertz

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Advice on converting a Club box, please.
« Reply #14 on: November 07, 2015, 05:37:33 PM »

Damn, RTFM again - except there isn't one!  Thanks Lester.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Advice on converting a Club box, please.
« Reply #15 on: November 07, 2015, 05:41:52 PM »

Lester's scheme will give you a doubling of the beat rate each octave as you go up.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Advice on converting a Club box, please.
« Reply #16 on: November 07, 2015, 05:45:28 PM »

Re calibrating, I've never do it but my android StroboSoft, Dirk's Tuner and a small electronic tuner all agree. So I've never seen a need. As to your tuning fork being reported as 1 cent sharp, assuming it's an A440 fork that will mean the tuner is measuring 440.254Hz an error of .06% which in melodeon tuning is acceptable.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Advice on converting a Club box, please.
« Reply #17 on: November 07, 2015, 07:40:21 PM »

  It seems to require an input of 440Hz to calibrate and I'm stumped to think what I can use... 
Rob.

A440 tone online at: https://www.youtube.com/watch?v=rFOl-9SNxLY
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Advice on converting a Club box, please.
« Reply #18 on: November 07, 2015, 09:02:20 PM »

Wow, I search for most things online, but never thought of looking for a tone!  I realise that shifting the reference will not give me an equal beat rate, that requires either a Hz offset or a calculated table of cents offsets.  I think it's an age thing that I assume my tuning fork is correct but I'll check again on manual as it seems more stable than the auto setting.  I believe the Android version varies a little in performance according to the handset being used, but so far so good!

Now I'd better buy some tools from CJM and get started.

Rob
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Advice on converting a Club box, please.
« Reply #19 on: November 07, 2015, 09:16:38 PM »


Now I'd better buy some tools from CJM and get started.

Rob

For files I recommend these Vallorbe Swiss Files 4" Extra Slim
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal