Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reeds  (Read 2461 times)

0 Members and 1 Guest are viewing this topic.

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Reeds
« on: November 10, 2015, 07:49:57 PM »

Hi .. whether the experiences of Czech reeds???
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Reeds
« Reply #1 on: November 10, 2015, 09:41:16 PM »

I assume you are talking about reeds from Harmonikas S.R.O.? www.harmonikas.cz

They make many different kinds, so it is difficult to say how they are, and it will make a difference what box you put them into. Some boxes sounds best with one kind, or at least different than they would with other types of reeds.

Harmonikas make 'normal' reeds in four qualities:
Macchina
Export
Tipo A Mano
A Mano

and they also make 'Dix' reeds on brass, zink, or aluminium plates. Search the forum for 'dix' and you should find a lot of talk about this type of reed. I think Squeezy had a lot of glorious things to say about the ones in his new Albrecht, though I'm sure they were expertly installed and tuned too.

I have tried the four standard types, and I have to say that I think the best ones are good, and the cheapest ones are... cheap. I think their amano reeds are very good, and would match some italian makers, but not all. I have their Amano reeds in one of my boxes, and they are very responsive, have good volume, and a nice tone.
I just got a shipment of some sets of their Export and TAM reeds to try out (today, actually), and I will have to try them to see what they are like when fitted and tuned. So far, I think they are great mid-range reeds, judging by their tone and response on the tuning table, even though that does not say much.
I would not recommend their cheapest reeds. They are in my ears a little harsh, not very loud for their air-consumption, and I found that they were not set very well from the factory (what do you get for half a euro...), and they all needed a lot of adjustment and setting before valving and installing.

But again, consider what sort of box they are going into, what sort of tone you want. And at what budget?

Ask me again in a month, and I will have tried out their Export and TAM reeds 'in action'.

/Lars
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reeds
« Reply #2 on: November 10, 2015, 10:57:39 PM »

Yes - the Dix reeds installed on the Albrecht 2 row I bought are a delight to play, not as loud and strong as a Binci reed, but far sweeter with a brilliant response range ... however it is hard to tell whether that is the box or the reeds.

I also have a Hohner Pokerwork which I fitted with a set of Harmonikas A mano reeds and in that setting they are absolutely on par with a set of some of the best a mano reeds from Italy with the same huge dynamic range and strong tone.  I can see that the cheapest they make will be an entirely different thing ... but these guys are capable of making very good reeds.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reeds
« Reply #3 on: November 10, 2015, 11:39:34 PM »

I have just received a couple of sets of DIX reeds from Harmonikas. It will be a while before they are installed where intended but I will report back manyana.
P.S. They are very expensive compared to TAM, etc.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Reeds
« Reply #4 on: November 12, 2015, 12:57:12 AM »

I am wanting to buy a few sets to Dix reeds, steel on zinc. Does anyone here know if they will sell in small quantities and how long after ordering, is delivery?
Logged
I'm squeezin' and they're wheezin': old junker boxes

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Reeds
« Reply #5 on: November 12, 2015, 07:45:59 AM »

I have gotten just a couple of sets in one order, and there was no minimum order.

I think they try to keep delivery times to 6 weeks plus shipping time.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reeds
« Reply #6 on: November 12, 2015, 07:49:10 AM »

Best thing is to ask the people at the factory.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Reeds
« Reply #7 on: November 12, 2015, 10:34:04 AM »

They are very easy to communicate with. Especially by email.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reeds
« Reply #8 on: November 12, 2015, 01:34:12 PM »

I am wanting to buy a few sets to Dix reeds, steel on zinc. Does anyone here know if they will sell in small quantities and how long after ordering, is delivery?

I ordered one set of Dix reeds.  Took two months to get them.  Had a little language issue because I was wanting something unusual, but for standard sets they easy to deal with.  Building a box to put them in now so haven't gotten to try them yet.  Tolerances and workmanship on reeds seem good.

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Reeds
« Reply #9 on: November 16, 2015, 02:11:24 PM »

I have now installed a set of T.A.M., and a set of Export reeds, both in 30's Hohners.

My, oh, my, they are actually really good reeds.

From the previous experience with their Macchina reeds, I had thought that the Export reeds would be a little on the harsh side, considering that they are second-cheapest variant, but my assumptions have been put to shame. Perhaps more strident than the TAM or AM reeds, but good response, well set from the factory (only minor setting needed), and plenty of volume.

The T.A.M.'s are in my opinion on par with many of the italian T.A.M. reeds I've tried. Softer tone than the Exports with much more dynamics. Again, very good response.

I did have one problem, where they put a chord reeds in the wrong octave compared to what I had specified, but they actually thought I had written a mistake and 'corrected' it. No problems - after an email correspondence they will send me the correct reed with the note/octave I want.

Now I kinda wish I had gotten some DIX too, just to try it out... So far, I am quite happy with the two times I've now dealt with them, both in terms of product quality and ease of transaction.
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Reeds
« Reply #10 on: November 20, 2015, 03:19:59 PM »

Do Harmonikas reed sets come with valves already fitted?
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Reeds
« Reply #11 on: November 20, 2015, 04:26:42 PM »

Do Harmonikas reed sets come with valves already fitted?

They offer it as an extra service.

I personally prefer adding my own valves, both since I like to tune the reeds pretty close on the table before installing (to avoid having to do too much tuning when they are installed) which I find is much easier without the valves installed, and since I like the option of choosing what valves to use, and how much adhesive to use.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reeds
« Reply #12 on: November 20, 2015, 10:02:39 PM »

Do Harmonikas reed sets come with valves already fitted?

My set was ordered without valves for the same reason as Lars, but they came with plastic valves, anyway.  I wasn't keen on the quality of valves, so pulled them all off and revalved them.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal