Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Dirty Areas on PA Bellows  (Read 2858 times)

0 Members and 1 Guest are viewing this topic.

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Dirty Areas on PA Bellows
« on: November 19, 2015, 11:51:38 PM »

I recently got a used PA. It works fine, and it has no musty odor.

The only main issue (besides the bass strap being too long, but that's another story, in another thread), is that the bellows are rather filthy. The little corners, which were originally white, are now black. Is this mold, or is it just dirt? It does not spread onto the tape, nor does it continue down the fabric.



There are also light spots on the fabric near the metal corners. Some of these light spots have darker centers. Is this mold, dirt, or is this from the metal?




Some brown stains.


And finally, there is also a large, rough, dark spot on the front of the bellows. I don't think mold is usually rough. Is it some sort of patch/stain?



The bellows are a bit uneven. Possibly from age.




Again, there is no musty odor. I'm very confused what these dark areas are. Could they be from cigarettes?  ???


Here's a link to the full size photos.
http://imgur.com/a/GiF6N

I've made a similar thread on the Accordionists' forum too.
http://www.accordionists.co.uk/viewtopic.php?f=4&t=3038
« Last Edit: November 19, 2015, 11:53:33 PM by The Happy Wanderer »
Logged
Mundinger Diaton III Grand Luxe C/F Club

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Dirty Areas on PA Bellows
« Reply #1 on: November 20, 2015, 12:57:07 AM »

It could be that the instrument has been played in a dusty and/or smoky environment at some stage. There is probably not a lot you can do about the dark staining on the corner gussets, which are made of fine leather. Use a dry decorator's paint brush to gently clean any loose dust and dirt from the bellows folds, but beyond that, I would just leave it be. Don't be tempted to use water, detergent or any solvent cleaning materials.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: Dirty Areas on PA Bellows
« Reply #2 on: November 20, 2015, 01:44:35 AM »

Thanks for the reply!  (:)

I think you are right about the smoky environment, as the Accordion was made in the 60s, and was porobably played by a musician at bars, where there were most likely smokers.

I will avoid using water. I have plenty of small, stiff paintbrushes available. I will try using those to get the dirt off.
Logged
Mundinger Diaton III Grand Luxe C/F Club

The Happy Wanderer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 283
  • Squeezing out Polkas on my Club Accordion.
Re: Dirty Areas on PA Bellows
« Reply #3 on: November 20, 2015, 02:22:54 PM »

I opened the box to see if there was any mold on the inside. There was some black on the gussets, but nowhere as much as on the outside. There was no musty smell inside either. It appears someone replaced the treble reeds, or valves, as the valves on the treble side are plastic or paper (I didn't touch them, but they are white.)

There is a small crack on the treble side, which I would guess is causing a small leak of air. Is it possible to glue the crack shut?

Some photos (two uploads, as the website was giving me errors.)
http://imgur.com/a/HjH9E
http://imgur.com/a/fr5bB

I also got some new pictures of the outside of the bellows.
http://imgur.com/a/De9pu
« Last Edit: November 20, 2015, 03:20:56 PM by The Happy Wanderer »
Logged
Mundinger Diaton III Grand Luxe C/F Club

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Dirty Areas on PA Bellows
« Reply #4 on: November 20, 2015, 03:21:13 PM »

Overall it looks in quite good condition, I have seen far, far worse!  I really wouldn't worry about the bellows, they look good to me too.
The white valves are made of vinyl not paper.

I can see the crack which you mention. It looks like the instrument has had a bit of a knock at some stage and it is possible that there might be a slight air leakage from the crack. If you push the corner pieces together with hand pressure, can you see whether the crack on the interior closes up? If so, I would be tempted to repair it (a) to prevent any air leaks and (b) to stop the crack spreading any further.

Use PVA woodworking glue, perhaps diluted with water to approx. 80% glue, 20% water. This is to make it less viscous and give it a chance to flow into the crack better. Mix the glue and water thoroughly.

You will need some clamps or moderately heavy weight to hold the crack closed while the glue sets. Or you could wrap several turns of thin rope/strong cord around the exterior of the box to similarly hold the joint together. Do a 'dry run' first without glue, to test your clamping arrangements.

Once you are sure you can clamp it together, use a small brush to force glue into the crack from the inside. You might even gently prise open the crack a little bit to help the glue flow into the crack, but be very gentle! then clamp it all up and keep it clamped until the glue has set - a couple of hours ought to do the trick. Remove any spillages/oozings of glue from the outside of the casing with a damp cloth before the glue has set.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal