Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Stuck axle on a modern two row box  (Read 2711 times)

0 Members and 1 Guest are viewing this topic.

The Idle Rich

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Stuck axle on a modern two row box
« on: November 20, 2015, 04:44:17 PM »

I have a stuck axle on a modern two row box with wooden levers. I sent it out for repair because of a sluggish lever and was told that the axle which should be removable won't come out. I wondered if this a possible sign of a defect of manufacturing or if anyone has ever heard of this problem before.   :-[

Thanks for any help. Rich
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Stuck axle on a modern two row box
« Reply #1 on: November 20, 2015, 05:44:48 PM »

Axle rods can be difficult to remove, but the only ones I won't attempt are those made in eastern Germany, that can include Weltmeister, where the axle rod is rather flimsy brass.   I've not yet admitted defeat with a modern Italian box.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Stuck axle on a modern two row box
« Reply #2 on: November 20, 2015, 05:51:19 PM »

Just adding to Theo's reply...

You need to release the action lever springs before trying to more the axle rod, otherwise the friction acting on the axle may render it very difficult to remove without damaging it.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Stuck axle on a modern two row box
« Reply #3 on: November 20, 2015, 05:54:03 PM »

Just adding to Theo's reply...

You need to release the action lever springs before trying to more the axle rod, otherwise the friction acting on the axle may render it very difficult to remove without damaging it.

This only works on Hohner like actions. On Italian actions that use under key springs it is not possible to release the springs prior to removing the action.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Stuck axle on a modern two row box
« Reply #4 on: November 20, 2015, 05:56:15 PM »

Just adding to Theo's reply...

You need to release the action lever springs before trying to more the axle rod, otherwise the friction acting on the axle may render it very difficult to remove without damaging it.

This only works on Hohner like actions. On Italian actions that use under key springs it is not possible to release the springs prior to removing the action.

Ah - thanks Lester. I have to admit I've only removed axle rods from Hohners (and the one-rows made on EP's courses).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Stuck axle on a modern two row box
« Reply #5 on: November 20, 2015, 05:58:21 PM »

Seem to remember Rees telling a tale of resorting to drilling the other end of a keyboard so he could access both ends of the axle and then applying a car battery across the axle to heat it up prior to being able to remove a particularly recalcitrant axle.

I have done a few and it is really hard to start off, seems from my experience that applying twist as well as pull will get the removal started but it does require a lot of effort.

ps If you think removing it is difficult wait til you get to reinstalling it  :o

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Stuck axle on a modern two row box
« Reply #6 on: November 20, 2015, 07:08:51 PM »

recall that anecdote too.

Mine is … learning to dismantle my Lily in about 3 minutes flat when I was sticking the buttons in (they spun off) with wood glue.

Top came off and the "economy size" glue tube orgasmed white glue all over the (solid wood bars) action :|bl Took me about 2½ minutes to "discover" the axel and a further 30 seconds to do a dismantle :Ph

So yes, Castas do come apart quite easily …
Logged
  _       _    _      _ 

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Stuck axle on a modern two row box
« Reply #7 on: November 20, 2015, 07:39:58 PM »

On a le bouebe with a particularly difficult axle I cut little groove around the very short protruding end of the axle with the edge of a swiss file.  The jaws of a pair of flush-cutting snips then got just enough purchase to draw the axle out. 
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stuck axle on a modern two row box
« Reply #8 on: November 20, 2015, 09:09:21 PM »

If you can get it moving and can persuade 12mm or so to come out then clamp the axle in a cordless drill chuck and rotate slowly while pulling.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Stuck axle on a modern two row box
« Reply #9 on: November 20, 2015, 09:36:43 PM »

If you can get it moving and can persuade 12mm or so to come out then clamp the axle in a cordless drill chuck and rotate slowly while pulling.
But what do you do with the drill?  :-\
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Stuck axle on a modern two row box
« Reply #10 on: November 20, 2015, 09:48:40 PM »

If you can get it moving and can persuade 12mm or so to come out then clamp the axle in a cordless drill chuck and rotate slowly while pulling.
But what do you do with the drill?  :-\

erm..... pull the trigger Tonto.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Stuck axle on a modern two row box
« Reply #11 on: November 20, 2015, 10:31:32 PM »

I found that Charlie Marshall's reed scraper, a hardened rod that I haven't had much use for as a scraper, is actually the precise diameter of the axle on a Hohner Student and therefore perfect to use to tap in one end to drive the axle out t'other, until I could get a decent grip on it with mole grips.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Stuck axle on a modern two row box
« Reply #12 on: November 20, 2015, 11:17:24 PM »

erm..... pull the trigger Tonto

Me understand kimosabe.


Another possible route is to use a soldering gun/iron and heat the axle.




Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Stuck axle on a modern two row box
« Reply #13 on: November 21, 2015, 07:04:17 AM »

"We're not a cowboy outfit.......are we Tonto"  8)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Stuck axle on a modern two row box
« Reply #14 on: November 21, 2015, 08:46:46 AM »

... and rotate slowly while pulling.

A bit like Malvolio then...  >:E




Twelfth Night, Act II, Scene V
One of the funniest scenes in all of Shakespeare's plays  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Stuck axle on a modern two row box
« Reply #15 on: November 23, 2015, 07:48:21 PM »

Axle rods can be difficult to remove, but the only ones I won't attempt are those made in eastern Germany, that can include Weltmeister, where the axle rod is rather flimsy brass. 

Agreed totally I had to do a small 70s welty  PA a few years ago , the only way the rod would come out was to "wind it" out around pliers , a decent one from Charlie went in just fine ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal