Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bass end felt button bushes  (Read 2233 times)

0 Members and 1 Guest are viewing this topic.

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Bass end felt button bushes
« on: May 29, 2009, 10:34:57 AM »

I have a Castagnari Lilly which doesn't have felt bushes on the bass buttons but could do with them; and I've just parted with another one which did and was better for it.

Does anyone have experience of installing these on a Lilly where there have never been any? I'm especially keen to know whether it can be done without having to enlarge the rod holes, which I guess means using very thin felt.

Any other suggestions to quieten down bass buttons which clack in the holes would be welcome (other than not play them, of course!).
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass end felt button bushes
« Reply #1 on: May 29, 2009, 10:45:09 AM »

It's safe to assume that you will have to enlarge the holes to make space for bushes, unless the reason for the excessive noise is that the bushes have fallen out and the buttons are extremely loose.  To get access to the holes unscrew the button tops and then withdraw the rods inwards.  Its often possible to do this without having to dismantle the mechanism.

There should be felt washers under the buttons,  after a lot of play these get compacted and can be replaced.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal