Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Rusty Reeds.  (Read 4369 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Rusty Reeds.
« on: December 07, 2015, 02:23:47 PM »

No, this isn't a post about an American oil worker; it's another plea for education, from the forum Thicko!

In a former life, I used to keep a piece of "Nox-Rust" vapour releasing paper in my breakdown tool box. Seeing as it wasn't in constant use, I wanted to protect the various tools in there from rusting, and it seemed to work just fine. Moving forward a few decades, I wondered if the same tactic might not be applied to melodeons which could be in an environment whereby they became susceptible to the dreaded rust?
Just a thought, on which I'd value the opinions of the cleverer members here.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rusty Reeds.
« Reply #1 on: December 07, 2015, 02:26:55 PM »

If you keep your melodeons in an environment where steel will rust, then it will also be damp or humid enough for damage to wood, leather, card and other materials too.  Better to keep the melodeon in the house, not in the shed/garage/attic/cellar.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Rusty Reeds.
« Reply #2 on: December 07, 2015, 03:22:31 PM »

Even I know that, Theo, now. I was thinking more of playing outdoors in the winter, and (as someone mentioned a while ago) moving a box from a cold place to somewhere warm, and getting condensation on the innards.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Rusty Reeds.
« Reply #3 on: December 07, 2015, 03:51:47 PM »

Condensation. Yep it was me that mentioned that a great while ago.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Rusty Reeds.
« Reply #4 on: December 07, 2015, 03:58:43 PM »

Even I know that, Theo, now. I was thinking more of playing outdoors in the winter, and (as someone mentioned a while ago) moving a box from a cold , lace to somewhere warm, and getting condensation on the innards.

When I played regularly for a morris side I kept   a very battered old pokerwork  that I had picked up for £50 as my morris 'grot box'. Despite   rusty reeds it was more or less in tune with itself  and it did the job    for many ears  without any complaints from dancers or fellow musicians!

Anybody, and there are quite a number of such persons, who plays a costalotti outside in wet/damp etc  conditions must   have more money than sense!

george >:E ;)
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Rusty Reeds.
« Reply #5 on: December 07, 2015, 04:29:50 PM »

Whilst trolling through Youtube looking at how various bits of the box are made and tuned, I watched in wonder as an Italian artisan hand made reeds, with such speed and confidence that takes the breath away.  He was doing all manner of bending and tweaking of the reed tongue that made me cringe.  Having riveted the tongue in position and filed (!) the gap to his satisfaction, he used a sort of linisher to profile the reed along its whole length with emphasis on either end to achieve the rough tuning.  That in itself goes against all the advice not to file across the reed for fear of creating a stress riser.  I guess the fineness of the abrasive avoids such pitfalls.

Anyway, I digress.  When the whole process was complete and the reed was tuned ready for sale, he wiped some liquid over the surface he had been working.  I wonder if anyone knows what this was?  I vaguely remember one of the reed manufacturer's websites mentioning that hand made reed sets were "oiled" to prevent rusting...  Could it be that it would be useful for reclaimimg a rusty reed?  I'm not suggesting that it would remove the rust but if that were done with a fibreglass brush/pen, is there a suitable preservative that could be wiped onto the surface after tuning?

Rob.
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Rusty Reeds.
« Reply #6 on: December 07, 2015, 06:57:07 PM »

I was told that a well known Shand Morino player ( not Jimmy himself!) brushed  his reeds with WD40 after he had tuned them.  I have no reason to doubt the story as it was relayed to me by a friend of the player in question  but I can't confirm it to the degree of recommending others to do likewise!

george



Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Rusty Reeds.
« Reply #7 on: December 07, 2015, 07:52:00 PM »

wait for it......i hear the non-oiling rally!   ;)
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Rusty Reeds.
« Reply #8 on: December 07, 2015, 07:53:01 PM »

Most of the Gipsy players I new on Dartmoor had used WD40 since it came on the market for reeds, casework etc, even on harness and chapped hands....
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Rusty Reeds.
« Reply #9 on: December 07, 2015, 09:00:32 PM »

Apart from the other much discussed reasons for not using WD40, the main drawback for me would be the smell!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Rusty Reeds.
« Reply #10 on: December 07, 2015, 09:51:12 PM »

try this?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Rusty Reeds.
« Reply #11 on: December 07, 2015, 11:05:57 PM »

But what about the usefulness of Nox-Rust paper in the world of melodeons?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Rusty Reeds.
« Reply #12 on: December 07, 2015, 11:34:12 PM »

The old time toolmakers generally kept a mothball or two in each drawer of their tool chests as an anti rusting measure, they were IIRC Naptha napthalene based and this had a better effect than the VPI papers then in use and were probably both cheaper and easier to get. Nowadays they are made of some more modern insecticide, anyone knowing where naptha napthalene based can be found please PLEASE advise.

There are microcrystaline waxes available which dry and protect at an incredibly thin coat - as used by museums and the like, they are at the Costallotti end of preservatives price wise though.

American Gunsmiths tend to brown rather than blue steel parts, this is done by deliberately causing a coat of rust to form then boiling the item in water, which converts the rust into an oxide coating which resists further rusting, it would also get rid of all that yukky tape on the bellows at the same time  :o

« Last Edit: December 08, 2015, 12:09:20 AM by Broadland Boy »
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Rusty Reeds.
« Reply #13 on: December 07, 2015, 11:55:29 PM »

Ah, but you can't beat the look of a Damascus barrel!  Same basic process but using oil.  Gunsmiths do still use a bluing preparation, but it's not as tough as a properly blued steel.  You'd think there would be something in this age of nano-technology though, wouldn't you?

Rob.
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Rusty Reeds.
« Reply #14 on: December 08, 2015, 12:04:12 AM »

Most quality bluing is done in a molten saltpetre bath these days Rob, the cold blues have no durability and are quite nasty.
I suppose they call it Damascus as they hadn't dug up the Sutton Hoo burial and found he had a sword made that way - interestingly, none of his melodeons survived all those years buried.........

I have great hopes that Graphene will produce the lightest, strongest, most expensive bellows ever, although air leakage through those millions of little hexagons may be a problem, still, carbon nanotube reeds will take very little wind to operate and will not rust, how Theo & co will manage to stick the valves onto them remains to be seen.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Rusty Reeds.
« Reply #15 on: December 08, 2015, 08:29:57 AM »

 ;D ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Rusty Reeds.
« Reply #16 on: December 08, 2015, 09:54:06 AM »

But what about the usefulness of Nox-Rust paper in the world of melodeons?
Nox Rust is a type of Volatile Corrosion Inhibitor (VCI) paper. I think that to be effective, the instrument would need to be wrapped completely in the paper; not necessarily tightly wrapped but pretty much enclosed nevertheless. As the VCI paper works by emitting a vapour which is then deposited only a few molecules thick on ferrous metal surfaces, I don't think it would have a deleterious effect on the instrument or its playability. But simply carrying a piece of the VCI paper in the instrument case is unlikely to have a significant benefit.

VCI paper might conceivably be of use if you were laying up an instrument in storage for any length of time, but as mentioned above, it needs to be fully enclosing the instrument. Otherwise, keeping an instrument in dry conditions, not too warm or cold, and is perfectly adequate.

I won't play outside in the rain, although I have been known to use one of those plastic cape affairs in an emergency. If I have played my instrument in particularly humid conditions (perhaps in a hot sweaty ceilidh band setting :o), on returning home, I will keep it out of its case for a few hours and play it a bit to run some air through the bellows and reeds.

Manufacturer's info on VCI papers here.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rusty Reeds.
« Reply #17 on: December 08, 2015, 10:26:19 AM »

This is also worth a read on the possible safety implications of VCIs  www.materialstoday.com/
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Rusty Reeds.
« Reply #18 on: December 08, 2015, 10:29:29 AM »

This is also worth a read on the possible safety implications of VCIs  www.materialstoday.com/

Wooo! Even more reason not to use them.  :o
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Rusty Reeds.
« Reply #19 on: December 08, 2015, 11:01:50 AM »

If you want to pack something in the case to keep the humidity down, a bag of silica gel should be a safer option. They come free with all sorts of packaging, and can usually be dried out in a warm oven and re-used when they've absorbed all the water vapour they can. No toxic fumes from that...

Our house is inherently damp because of the clunch walls (originally farm workers' cottages built ~ 1790) and we've installed a de-humidifier, which must be good for melodeons as well as preventing mould from growing in the coldest corners (the reason why we got it in the first place).
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal