Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Gasflowing the exhaust manifold!  (Read 4096 times)

0 Members and 1 Guest are viewing this topic.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Gasflowing the exhaust manifold!
« on: December 10, 2015, 12:34:55 AM »

In a fit of curiosity, I was staring up into the reed block of my Chinese Pokerwork and found that the floor level of the chambers ramps up to reduce the depth for the smaller reeds.  This "floor" increasingly impinges on the air path and being a step must surely have a profound effect on the airflow?  I wonder whether anyone has experimented with blending the step into a smooth transition form the round hole presented to the pallet to the chamber shape?  I always thought the box required more pressure as you go up the fingerboard, perhaps this is part of the reason.

Anyone care to comment?

Rob.
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Gasflowing the exhaust manifold!
« Reply #1 on: December 10, 2015, 02:38:45 AM »

You actually need less pressure on the highest reeds, which is why they don't have valves on them and sometimes there's a very deliberate hole made in the wax around them.

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Gasflowing the exhaust manifold!
« Reply #2 on: December 10, 2015, 08:05:24 AM »

Your description sounds like the design of the highest few reed chambers of a chromatic harmonica (chambers which also have no valves). There's a reference to the reason and to attempts to manufacture better sized/ shaped ramps here:
http://www.brendan-power.com/combs-hohner.php

Cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Gasflowing the exhaust manifold!
« Reply #3 on: December 10, 2015, 09:21:56 AM »

You actually need less pressure on the highest reeds, which is why they don't have valves on them and sometimes there's a very deliberate hole made in the wax around them.

And the rate of flow of air through the highest reeds is much smaller than the larger, lower pitches so gas flow is not a limitation.   What might conceivably make a difference is the path by which sound propagates to the outside of the box.  More roughness and more edges act as absorbers and diffusers.  In theory both of those will could reduce the sound volume and brightness.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Gasflowing the exhaust manifold!
« Reply #4 on: December 10, 2015, 12:31:56 PM »

OK. I can accept all that, although remember that looking into the base of a reed block you are in effect standing on the side from which you wish to hear it.  The lesser requirement for volume of air as the pitch increases must then mean that the same people who couldn't be a**ed to tune the lower reeds also couldn't be b***ered to set the higher pitched ones so they need a hernia inducing pressure to make them speak - right?  In case I haven't made it clear, I believe that half the production steps needed to make a playable box were deleted from the process when they translated into Chinese.

Oh well, experiments will have to wait till I've got it in tune.  Incidentally, taking the grille off makes a tremendous difference to the volume it kicks out.  There is a reason why VdA makes such a superb grille!  It really only wants to be a dust filter.  Spo I do wonder whether blending the pathways might have more effect than most would expect - but it may be more to do with the tone than the volume produced.

Rob.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Gasflowing the exhaust manifold!
« Reply #5 on: December 28, 2015, 05:20:19 AM »

My understanding has been that the size and shape of the little chamber on small reeds is altered because it starts to have a negative effect on the reed due to harmonics. Changing the shape and size of the chamber defeats this or you can make a bleed hole to let air turbulence do the trick (the latter method has other problems) Turning the reed upside down also helps. The reed locks and is hard to play because the wave coming back from the wall of the chamber damps out the motion of the reed, making it very hard for it to start.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Gasflowing the exhaust manifold!
« Reply #6 on: December 28, 2015, 01:59:19 PM »

Right - I always wondered why the highest reeds are invariably inverted!  The Pokerwork also has a pair of holes drilled through the wax for the top pairs.  Strange thing is that one thinks intuitively that a slab sided chamber will promote resonance back to the reed more than a contoured shape.  As 50% of the aperture to the reed block is blocked by the step I think this design has turbulence aplenty, yet they still have to drill holes through the wax (and invert the reed).

If it's still unresponsive after I attempt to reset it, I'll experiment with flowing the passage.  After all, I can always reinstate it with a bit of putty.

Trouble is, my mate plays trombone and he's been explaining the effects of resonance on volume and tone in brass instruments.  The difference in tone between instruments are attributed to the bore and taper along with the size and curvature of the bell.  Playing any instrument only really works when the slide is moved to give resonance for each note.  The subject came up as he's been struggling a bit with a plastic bone.

Rob.
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Gasflowing the exhaust manifold!
« Reply #7 on: December 28, 2015, 02:21:59 PM »

Funny that,Rob, my dog has the same problem. Must by something going about....
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Gasflowing the exhaust manifold!
« Reply #8 on: December 28, 2015, 06:21:25 PM »

I never saw the hole in the wax on an instrument made before the 90s. I see it as a sort of cheat/workaround of a production line method that adds a few min to the manufacturing process. I see it on Chinese boxes and and have seen it on a couple of gabbanelli instruments.  Simply blocking the hole will make the reed hard/impossible to play.
 I find that it also wastes air and makes the reed a bit breathy sounding so this is the first thing I rework on any instrument that goes on the shelf in the shop.
  Takes about 5 min a reed once you get the hang of it, and you will have to retune the reed in the process too.

I convert old Italian Pas from L/M to M/M on occasion and the rechambering has to be done on the higher 4th of the reeds. I usually precut bits of wood and finish off with wax.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Gasflowing the exhaust manifold!
« Reply #9 on: December 28, 2015, 10:40:08 PM »

Back to the initial question, this idea has been tried.

I have seen accordion reedblocks whose chambers had a smoothly contoured airway at the base.  For example, a 1903 Miller (with reedblock glued in place) has the inside of the chambers with smoothly curved walls, and a 1930s Baldoni-Bartoli (with removeable reedblocks) has a walnut sole (bottom plate of the reedblock) where the insides of the chambers have been hand-tapered with a chisel. I'm away from those accordions right now, but when I get a chance I'll add some pics.

PG

Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Gasflowing the exhaust manifold!
« Reply #10 on: December 29, 2015, 07:14:00 AM »

Back to the initial question, this idea has been tried.

I have seen accordion reedblocks whose chambers had a smoothly contoured airway at the base.  For example, a 1903 Miller (with reedblock glued in place) has the inside of the chambers with smoothly curved walls, and a 1930s Baldoni-Bartoli (with removeable reedblocks) has a walnut sole (bottom plate of the reedblock) where the insides of the chambers have been hand-tapered with a chisel. I'm away from those accordions right now, but when I get a chance I'll add some pics.

PG
I had been thinking these lines. Recently, I was talking with long time melodeon playing friend, who is a retired aerospace engineer, about possible ways to optimize reed performance. There are physical realities at play here, but often our understanding is incomplete. I play, modify, and fabricate parts for french horns for my own edification. I have studied the literature with regards to the theories of wave behavior in confined spaces. A lot of research was done during the pre-electronic sound reproduction era with regards to mechanical horn shaped speakers. It turns out that recent discoveries now identify the wave form as having a hemispherical shape due to friction along the edges of the horn bore. The older, long held ideas were of a more linear wave shape.  I think that there  is still something to be learned/discovered here.
« Last Edit: January 03, 2016, 09:23:53 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #11 on: January 03, 2016, 12:26:19 AM »

Don't forget that the reed chambers are so small that the resonant frequencies between the walls are very high, far higher than in brass instruments or horn speakers -- the lowest resonance is where the chamber is one wavelength long, for a 3.3cm chamber this is at 10kHz which is way above any reed fundamental, and this will be even higher for the highest-pitched reeds.

Not saying that reed chamber size doesn't affect the sound because it obviously does, but this is much more likely to be airflow or volume related than a chamber resonance.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Gasflowing the exhaust manifold!
« Reply #12 on: January 03, 2016, 09:27:54 AM »

Don't forget that the reed chambers are so small that the resonant frequencies between the walls are very high, far higher than in brass instruments or horn speakers -- the lowest resonance is where the chamber is one wavelength long, for a 3.3cm chamber this is at 10kHz which is way above any reed fundamental, and this will be even higher for the highest-pitched reeds.

Not saying that reed chamber size doesn't affect the sound because it obviously does, but this is much more likely to be airflow or volume related than a chamber resonance.

That was the conclusion we had had also come to. It is more like optimizing the plumbing for a compressed air system, which is part, but not all of the total consideration.
Logged
I'm squeezin' and they're wheezin': old junker boxes

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #13 on: January 03, 2016, 10:58:52 PM »

Don't forget that the reed chambers are so small that the resonant frequencies between the walls are very high, far higher than in brass instruments or horn speakers -- the lowest resonance is where the chamber is one wavelength long, for a 3.3cm chamber this is at 10kHz which is way above any reed fundamental, and this will be even higher for the highest-pitched reeds.

Not saying that reed chamber size doesn't affect the sound because it obviously does, but this is much more likely to be airflow or volume related than a chamber resonance.

That was the conclusion we had had also come to. It is more like optimizing the plumbing for a compressed air system, which is part, but not all of the total consideration.
Precisely. It's the same argument as when people use the analogy with stringed instrument soundboards and wood type and extend this to melodeons -- what is true for one type of instrument doesn't apply to a completely different one. Airflow and the reed construction and setting are crucially important for free reed instruments because these are what makes and modifies the sound.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Gasflowing the exhaust manifold!
« Reply #14 on: January 04, 2016, 02:43:43 AM »

Don't forget that the reed chambers are so small that the resonant frequencies between the walls are very high, far higher than in brass instruments or horn speakers -- the lowest resonance is where the chamber is one wavelength long, for a 3.3cm chamber this is at 10kHz which is way above any reed fundamental, and this will be even higher for the highest-pitched reeds.

Not saying that reed chamber size doesn't affect the sound because it obviously does, but this is much more likely to be airflow or volume related than a chamber resonance.

That was the conclusion we had had also come to. It is more like optimizing the plumbing for a compressed air system, which is part, but not all of the total consideration.
Precisely. It's the same argument as when people use the analogy with stringed instrument soundboards and wood type and extend this to melodeons -- what is true for one type of instrument doesn't apply to a completely different one. Airflow and the reed construction and setting are crucially important for free reed instruments because these are what makes and modifies the sound.
I've thought about building some variable volume reedblocks which would be modular and possible to attach to a variety of differently configured manifolds and instrumented wth accelerometers and spectun analysis equipment, but it's only food for thought at this point. I'm busy making the old junkers I already have playable.  I want to do emperical research before building a new melodeon.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Gasflowing the exhaust manifold!
« Reply #15 on: January 04, 2016, 06:27:42 PM »

If it was a flow issue I think the low reeds would have the biggest problems, as the amount of air going through the highest reeds is pretty minimal.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #16 on: January 04, 2016, 10:58:22 PM »

If it was a flow issue I think the low reeds would have the biggest problems, as the amount of air going through the highest reeds is pretty minimal.
Depends what you mean by "a flow issue". The highest reeds often have a bypass hole drilled through the reed block which reduces the pressure difference seen by the reed, if this is too high they are often reluctant to start. With low reeds too small a chamber can also lead to difficulty starting, a bigger chamber slows down the rate of rise of pressure when the pallet opens and reduces the tendency to choke.

In the end as a free reed instrument it's all down to the airflow (and sound path to the outside world), plus the reed shape/profile and the way it's set in the frame and the reed chamber size, and there's still a lot of "black art" and experience in building and voicing a box that speaks quickly when played quietly and doesn't choke when played hard -- though to some extent these two are mutually exclusive.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Gasflowing the exhaust manifold!
« Reply #17 on: January 05, 2016, 12:28:53 AM »

Is it possible that there is enough flow rate variation for this to be akin to the turbulent / lamina flow issues which can dog burner / combustion chamber design, where a low tickover flame and full chat seem to aim for mutual exclusivity ?
I doubt lamina flow rates are attained but with all square 'flues' and right angled direction changes the air will be pretty lively before the reed tongues get to chop and dice it. (and wedges to vary the delivery appear to be part of the remedy)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Gasflowing the exhaust manifold!
« Reply #18 on: January 05, 2016, 11:14:13 AM »

Is it possible that there is enough flow rate variation for this to be akin to the turbulent / lamina flow issues which can dog burner / combustion chamber design, where a low tickover flame and full chat seem to aim for mutual exclusivity ?
I doubt lamina flow rates are attained but with all square 'flues' and right angled direction changes the air will be pretty lively before the reed tongues get to chop and dice it. (and wedges to vary the delivery appear to be part of the remedy)
Speaking with my engineering hat on, laminar/turbulent flow is unlikely to make any difference with something as small as a reed and sensitive to pressure rather than turbulence (unlike a flame), directing the airflow from the pallet hole to the reed correctly (whatever "correct" is) is much more likely to be the reason.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Gasflowing the exhaust manifold!
« Reply #19 on: January 05, 2016, 12:01:14 PM »

As far as I know, push and pull notes can have similar issues with high reeds not sounding properly, but the bulk airflow patterns (e.g. turbulent vs laminar) would be quite different between push and pull.
That suggests it's more likely to be it's an acoustics problem than airflow, to the limited extent that they are different things.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal