Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Club Modell II  (Read 11227 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Club Modell II
« on: December 11, 2015, 08:37:10 AM »

I`m getting a Club Modell II next week as a winter project, I believe a modded one of these is still Theo's Weapon of choice . I don`t know what key , really hoping its Bb/Eb but I`m sure it`ll be C/F as 99.999% of them are ..

I`ve fettled 30s Pokerwork sized 2 rows, (a Double ray & a Presswood), a 1040 and two Student-1 Mk1 accordions from the same era so assume the build is similar regarding mechanics, reeds, valves etc . but are there any pitfalls peculiar to this box, I`ve never had an "Erika" before in any guise. the wood strip riser for the forward bass buttons needs replacing .


« Last Edit: December 11, 2015, 08:50:04 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Sage Herb

  • Steve Harrison
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 762
  • Slaithwaite, UK
    • The Black Box Band
Re: Club Modell II
« Reply #1 on: December 11, 2015, 08:57:59 AM »

Hi Adam
I'm sure that Theo will be along soon with technical advice, but in the meantime let me assure you that these are great boxes - I have several (mostly restored by Theo) and use them a great deal. Good choice!
Cheers
Steve
Logged
Hohner Erikas & Club 2s
Hohner gob-harps:
Vega Senator 5-string banjo; Alex Burns plectrum guitar

Black Box Band - www.theblackboxband.co.uk
Annie Dearman & Steve Harrison - www.dearmanharrison.co.uk
Phoenix - www.phoenixdanceband.co.uk
http://soundcloud.com/sage-herb

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Club Modell II
« Reply #2 on: December 11, 2015, 09:06:48 AM »

Best diatonic box that Hohner ever made in my opinion.
Most things will be familiar if you have worked on a two row Hohner. Main differences are the keyboard construction with removable top plate, the the treble mechanism is more robust, and a bit more complex.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #3 on: December 11, 2015, 02:17:07 PM »

Thanks Steve ..

Theo - so it has a removable top plate like a "normal" (read later curvy celluloid) Club-II/III, that`s handy , I guess these are 3rd button start with low notes (the accs having their own mini-row) , Club basses, Gleichton  etc

I wanted one of these during the MAD phase a few years ago as the other early 30s boxes I`d had (That Double Ray I "relic`d", C/F Koch , Student 1s etc) had an extra lively edge to them which even the regular (50s onwards)  Ericas / coronas / Pokerworks seemed to lack ..... and also that there were 4 accidentas not taking up valuable row real estate :D
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Club Modell II
« Reply #4 on: December 11, 2015, 02:47:01 PM »

So it wa you who bought it!  The broken riser shouldn't be too much of a problem, you'll simply have to make a new one.  Snip off the bent nails (pivot pins) that hold the bass levers and they'll pull up and out  - just like a Pokerwork.  When I had to replace a couple of broken bass buttons on a Pokerwork, Martin advised me that Hornby track pins were the most easily obtainable replacements for the pivot pins, though I can't swear that it'll be the same on the Modell II.

Rob.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #5 on: December 11, 2015, 02:55:00 PM »

The broken riser shouldn't be too much of a problem, you'll simply have to make a new one.  Snip off the bent nails (pivot pins) that hold the bass levers and they'll pull up and out 

LOL Rob - I`ve re-used Bent hohner bass mech "Pins" before now , always remember to label the rods when taking the lot out , it`s tiresome working out which one goes where even when there are only 8 .. at least all have their buttons on ..

I`m expecting to do a full re-wax and valve on this box (curly cabbage leaves for valves on 30s Hohners) , just hoping it`s not far out of tune and all the reeds have their tongues .. Prob have to do Pallets too but reluctant to use the usual thick felt/leather on the treble end as the last time I did it (on a Presswood) I`m sure it dulled the sound a margin and took the edge off, I want the full blooded Erika sound from this   .. also hoping the gussets are intact  ..
« Last Edit: December 11, 2015, 02:57:18 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Club Modell II
« Reply #6 on: December 11, 2015, 03:41:19 PM »

So it wa you who bought it!  The broken riser shouldn't be too much of a problem, you'll simply have to make a new one.  Snip off the bent nails (pivot pins) that hold the bass levers and they'll pull up and out  - just like a Pokerwork.  When I had to replace a couple of broken bass buttons on a Pokerwork, Martin advised me that Hornby track pins were the most easily obtainable replacements for the pivot pins, though I can't swear that it'll be the same on the Modell II.

Rob.

Always mark the levers in some way to make sure they go back where they came from. Can take an infuriating amount of trial and error otherwise.

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: Club Modell II
« Reply #7 on: December 11, 2015, 04:39:59 PM »

Apols for slight topic drift, but is there any big differences between the Club Modell's of this vintage and the Erika's of the 1930's - gleichton aside of course?
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #8 on: December 11, 2015, 07:57:15 PM »

Good Question, I`d like to know that ....... the Modell-I has only 2 accidentals but otherwise looks the same as the Modell-II . the Model-III is more pre-Corona shaped complete with rounded-top grille but in the same style wood wise as the I and II ..........

the Erika looks like a re-badge of the Modell-II with more sophisticated cosmetics (less home-made looking labelling), I thought the Erika was a club box also but never played one so if not, I guess that`s the "mechanical" difference ... Is this right Theo ?
« Last Edit: December 11, 2015, 07:58:58 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Club Modell II
« Reply #9 on: December 12, 2015, 10:44:54 AM »

Yes Erika is a club model.  As far as I can tell the Erika and the wooden bodied club II models are the same. There are variations of graphics on both, and on both there are variants with a recessed panel for the bass buttons.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #10 on: December 12, 2015, 11:11:52 AM »

is it an Age thing then ? (Erikas older or newer) or was the Erika the "Ghia" version (Posher cosmetics)
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #11 on: December 14, 2015, 02:48:36 PM »

Well the Club-II has arrived - pretty much as expected (and hoped) from a box owned most if not all its life by one person ..

never opened before so clean as a whistle inside all the typical 30s Hohner cabbage leaves are there (and crying out for plastic valves), cracked original wax and a couple of stuck tongues . mostly in tune (all in fact bar some trem difference on some notes), the Zinc reedplates are refreshingly clean and tongue rust very minimal !! , the Fondo's leather gasket is intact too and there`s no worm anywhere in the box.  ..

The outside as usual not fared as well (which is usual)  though the bellows are very nice indeed, the grille is rusty on the inside and the gold paint (they weren`t chromed) rusty in parts, way easier to sort than pitted chrome :) . the pallets are intact and never been messed with, typical half a kilo of muck in there (Hair, dead spiders, fluff etc ) and the remains of the grille cloth hanging loose, the woodwork`s varnish looks largely good except for that it`s at that stage where even a fingernail can leave a white line in it - is there a way to remove this varnish without losing the graphics ? .....

On this one the fingerboard hasn`t a removable top like the early Corsos, Viktorias, Pre-coronas etc and has cracked and lost a bit between 2 buttons - can these fingerboards be sourced ? , the 4 accidental one seems to be the most common at least .

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Club Modell II
« Reply #12 on: December 14, 2015, 10:40:38 PM »

On this one the fingerboard hasn`t a removable top

The picture shows it is the usual shape, so I strongly suspect that the top is a later replacement. and it has been glued on.  You should be able to remove the top and replace it with the standard black celluloid, or even make a better one and screw it on.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #13 on: December 15, 2015, 07:31:36 AM »

The top looks as old as the rest of it Theo and there`s no tell tale signs of ever being replaced , no cracks in the black paint at the edges etc, it still has "original Hohner" and "DRP" underneath (Feint as you`d expect) so the whole lot hasn`t been re-done and the top is in by far the worst condition . I`m convinced that this fingerboard was made like this and replacing the top will be like doing an old presswood etc ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Club Modell II
« Reply #14 on: December 15, 2015, 08:48:24 AM »

Well you've seen it and I haven't, but what makes me think it's not an original top is the finish.  Hohner black painted keyboards have a thick glossy finish.  Your top has a thin dull finish, even in the corners where it is protected from wear.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Club Modell II
« Reply #15 on: December 15, 2015, 02:20:47 PM »

I tend to agree with Theo as the finish usually wears through without flaking away like yours appears to have done.  It may still be possible to split it off and replace it with an acrylic one or similar, maybe just a thin ply and repaint - get an accurate tracing of the top before anything irreversible has occured!  I always fancied a stainless top with a machined, jewel turned finish (poser!).  That should balance the weight of the bass reeds.

Rob.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #16 on: December 15, 2015, 02:37:36 PM »

The thin dull look was years of grime, after a clean, the glossy finish can be seen ..

BTW what is the best stuff to clean the varnish and graphics, I can re-varnish (or use finishing Oil) over the top .. thanks
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Club Modell II
« Reply #17 on: December 15, 2015, 02:57:45 PM »

It really does look like nobody has been inside since it left the factory.  There are no discernable marks where the retainers have been moved to release the reedblocks and everything has the same level of patina.  As you say, the outside is not so lucky.  The PO has pencilled the notes along the keyboard and the fact that the finish revelas the woodgrain and has cracked suggests that it has been damp, so lucky it hasn't been played and let all the damp inside. 

I wonder if anyone knows of a company that could strip and replate the grille?  I think with a strip, polish and nickel plate it would look fantastic.  There were some articles in Practical Boat Owner about plating ay home, basically using a foam wand to brush a coating onto a piece in an electrolyte bath - must try to find it again.  Of course, it may be cheaper to get a professional to do it if it can be added to a batch of other work.

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Club Modell II
« Reply #18 on: December 15, 2015, 03:04:45 PM »

Originally the grills on these models were made of steel with a silver paint finish.   You can still see plenty of the original finish on this one, and the small rust patches show that the material is steel.  Some later models with the fir tree grill pattern were nickel plated on brass, and I've even seen one or two that looked like stainless steel..  Nickel plating on steel requires a lot of surface preparation compared with painting.  Paint is good at concealing small surface defects, but plating will draw attention to them! My usual method with these is to use paint striper and steel wool to get down to bare metal, remove any rust then prime and paint with a silver car paint. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Club Modell II
« Reply #19 on: December 15, 2015, 03:10:13 PM »

Yeah - the inside is lovely and the reedblock retainers were hard to move (did it very carefully), they now show signs of being removed which as you said Rob, would have been there prior to me doing it ..

the damp hasn't damaged the bellows either and even the tape is in good nick - there`s a small hole in one of the gussets, thankfully on a flat part of the leather  (which would be best glue for a patch ??) . after a clean-off the pallets are very nice (no staining, cracks or rot) but some of the rods are rusty as usual and the pallets will need careful removal to save wood damage .

Sorry - Theo posted while I was typing , this one looks like a gold grille (My pre-edit text below )

These grilles weren't plated as far as I know, this one definitely was painted gold like the Double-ray of the same era I had which I painted it black as I`d "relic`d" the box (I ain`t relic`ing this one) , I`ll paint it gold again

Proof of the one-piece fingerboard


« Last Edit: December 15, 2015, 03:13:40 PM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal