Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: My Melodeon Building Project  (Read 9598 times)

0 Members and 1 Guest are viewing this topic.

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
My Melodeon Building Project
« on: December 12, 2015, 03:00:02 PM »


https://m.youtube.com/watch?v=PgqC1a7vR9A

Over the last few months I have been building a melodeon. It is made out of oak, don't know if this will affect the sound!!! Not finished yet, I work on it 1 day a week. It is built to fit a hohner students 2 bellows, when completed it will have pokerwork reeds. What do you guys think? Any recomendations?
Vidio on link above!!!

Cheers

Mr Hohner

Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: My Melodeon Building Project
« Reply #1 on: December 13, 2015, 12:41:53 AM »

I say well done, not an easy thing to do. What is the keyboard mechanism? Looks like a Hohner mech? Are you going to make the reed blocks or use 'reclaimed' ones? I'd be a bit worried about the weight of a box made from oak and I have no idea what it'll sound like. Oak is very dense and heavy so I guess you'll find out when you have finished it.

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #2 on: December 13, 2015, 08:19:05 AM »

I say well done, not an easy thing to do. What is the keyboard mechanism? Looks like a Hohner mech? Are you going to make the reed blocks or use 'reclaimed' ones? I'd be a bit worried about the weight of a box made from oak and I have no idea what it'll sound like. Oak is very dense and heavy so I guess you'll find out when you have finished it.

The treble mec is a pokerwork one yes, I might try and build my own when I know that the box works when completed. I haven't really decided on reed block yet, I'll have to see how it goes!!!

Cheers
Mr hohner
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #3 on: December 13, 2015, 08:25:10 AM »

I am a bit worried because the mec seems to clack a lot when hitting the ply underneath. Would putting felt down be the way to sort this?
 8)
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: My Melodeon Building Project
« Reply #4 on: December 13, 2015, 08:37:32 AM »

Hohner mechs do clack a lot. Normal solution is to replace the pallet facing with something thicker, like felt and leathrr, but even this doesn't always work. Also in the case of the mech you have this will drop the buttons into your keyboard as you add thickness to the pallets. You can make your own facing by gluing suitable soft leather to felt (say, piano felt obtainable from a piano parts supplier... Ordinary craft felt isn't really thick enough). Some boxes (possibly like your Castag) have a 'mousse' or sort of polystyrene layer to cushion the pallets. Not sure where you are but here in the UK you can get a craft plastic/foam sheet which you could try as one of the pallet layers. Of course you can buy felt/leather sheet from Charlie Marshall in Scotland, but seeing as you are making your own box you may as well experiment with pallet facings too. (:)

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #5 on: December 13, 2015, 08:56:17 AM »

Hohner mechs do clack a lot. Normal solution is to replace the pallet facing with something thicker, like felt and leathrr, but even this doesn't always work. Also in the case of the mech you have this will drop the buttons into your keyboard as you add thickness to the pallets. You can make your own facing by gluing suitable soft leather to felt (say, piano felt obtainable from a piano parts supplier... Ordinary craft felt isn't really thick enough). Some boxes (possibly like your Castag) have a 'mousse' or sort of polystyrene layer to cushion the pallets. Not sure where you are but here in the UK you can get a craft plastic/foam sheet which you could try as one of the pallet layers. Of course you can buy felt/leather sheet from Charlie Marshall in Scotland, but seeing as you are making your own box you may as well experiment with pallet facings too. (:)
Thanks, I'll have to investigate!!!
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: My Melodeon Building Project
« Reply #6 on: December 13, 2015, 09:06:25 AM »

Hohner mechs do clack a lot. Normal solution is to replace the pallet facing with something thicker, like felt and leathrr, but even this doesn't always work. Also in the case of the mech you have this will drop the buttons into your keyboard as you add thickness to the pallets. You can make your own facing by gluing suitable soft leather to felt (say, piano felt obtainable from a piano parts supplier... Ordinary craft felt isn't really thick enough). Some boxes (possibly like your Castag) have a 'mousse' or sort of polystyrene layer to cushion the pallets. Not sure where you are but here in the UK you can get a craft plastic/foam sheet which you could try as one of the pallet layers. Of course you can buy felt/leather sheet from Charlie Marshall in Scotland, but seeing as you are making your own box you may as well experiment with pallet facings too. (:)
Thanks, I'll have to investigate!!!

Before launching on pallet refacing it would be best to investigate the source of the clacking. Is it the pallet closing (pallet facing solution) or the mech hitting the fingerboard when pressed (travel restriction solution). If your fingerboard has a removable back the travel restriction is easy to do by placing felt on the back board otherwise Theo's method of restriction is probably the best (use the google search in the forum).

The reason I raise this is the amount of time it took me the first time I tried to quieten the bass action on a Hohner Erica, did all the pallet refacing only to find the problem was still there. On investigation I found the bulk of the clack was from the buttons rattling in the casework holes, solution was to bush the holes - blissful silence  (:)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: My Melodeon Building Project
« Reply #7 on: December 13, 2015, 09:35:49 AM »

Yes. Should have added...assuming the noise is coming from the pallets... Sometimes the pallets/arms actually knock on the grille (like on my unfettled 114).

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #8 on: December 14, 2015, 11:58:13 AM »

Bass mec to go in this Friday, will post more pics next week with it in!!!
Cheers
Mr hohner
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #9 on: December 15, 2015, 01:51:07 PM »

How easy would it be to make my own reeds? Is it possible to do this at college, I have the right equipment I think.
Cheers
Mr hohner
 :||:
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: My Melodeon Building Project
« Reply #10 on: December 15, 2015, 02:08:51 PM »

Wow, that would be some undertaking!  The reed frames could be machined from solid aluminium and hand finished to get the sharp corners required for the slots.  The tongues are made from strips of spring steel, cut from a reel and rivetted to the frames.  The thickness of the tongue probably needs to be reduced overall to suit the pitch of the note whilst giving an even tone across the range and then valved and tuned to exact pitch.  All in all a very skilled operation, with extra problems of sourcing the right materials.

There is a marvellous Youtube video of an Italian craftsman making reeds - you really should watch it, even if it puts you off trying it!
https://www.youtube.com/watch?v=GgYYyn72HLI

Rob.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My Melodeon Building Project
« Reply #11 on: December 15, 2015, 02:16:15 PM »

How easy would it be to make my own reeds? Is it possible to do this at college, I have the right equipment I think.

Not wishing to put you off trying if that's what you really want to do - who knows, you might become a UK expert at it.

But having a couple of acquaintances who make concertina reeds, I know it is a hugely time-consuming and exacting task for one person. You need to have the right grade of spring steel with the correct temper for the reed tongues, high quality aluminium, brass or zinc for the reed plates, plus the tools and equipment for very accurate and consistent machining and finishing. Plus lots of time (I said that) and patience. Your first attempts are not likely to be successful and you will need to be prepared to learn from your mistakes and failures before you can produce a set of workable reeds.

My advice would be to use commercially available reeds for your first melodeon-building project (and probably for a few subsequent projects too) so you can be playing and working on your own instruments, whilst you continue to explore the reed-making options and have a go at making a few prototypes.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My Melodeon Building Project
« Reply #12 on: December 15, 2015, 02:28:23 PM »

If you want to try some serious reed work but with actually making from scratch you could use piano accordion reeds as your starting point.  It can be done and will teach you a lot about what works and what doesn't work in a reed tongue.  Expect to make lots of mistakes - which is the way to learn.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #13 on: December 15, 2015, 02:48:14 PM »

Thanks for all the advice, I'm slightly put off it but I'll give it my best shot!!!
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: My Melodeon Building Project
« Reply #14 on: December 15, 2015, 10:57:05 PM »

If you have access to a machine shop, you can use a surface grinder to precisely thickness the reed tongue metal uniformly to 0.0000s(1/10,000) of an inch tolerances. I saw this tool being used in a early 1960s video of concertina making in the Wheatstone factory. The same thing can be done using a very flat stone used for sharpening knife blades, but it is much slower and depends on the skill of the user. For experimentation purposes, you could scrounge up old clock springs or flat coil springs such as are found in the recoil starting mechanisms of small air cooled engines used on lawn mowers and string trimmers.  I think the most time consuming and challenging part would be to precisely size the clearance between the slot in the reedplate and the tongue. I would encourage you to try if you have the interest. The time spent, even if you didn't succeed initially would give you a better understanding of your instrument.
« Last Edit: December 15, 2015, 11:01:12 PM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: My Melodeon Building Project
« Reply #15 on: December 15, 2015, 11:32:10 PM »

Given the number of punch tools needed to slot the reedplates and punch out the reed tongues, unless you have a water jet cutter available at college (so you only have to 'write' the variants once, either as a drawing or machine code) then Theo's suggestion of recycling old PA reeds is a very time, materials and cost effective method. Grind off the rivet head from one reed per plate, punch it out, (label the reed frequency or note first, same time mark up the remaining reed) you can then shuffle the reeds along a note, match the one(s) you need to be the diatonic pair for the plate, file the slot to suit (have to fit the lower reed as you can't shorten the slot) Rivet in & file or scratch to suit.

Health and Sanity warning - these suggestions are made from a long and wide experience of wrangling small or precise metal elements of diverse mechanisms and are not polluted with significant practical experience of bulk reed replacement work 8)

As Steve said, you may find you have an aptitude for it  (:) our next generation of reedmakers or tuners need to be practicing their craft, which I suspect has more to do with a decent ear (or two), some musical knowledge, an enquiring mind, patience and skill to do nice work with handtools, than measuring to fine tolerances and expensive machinery.
 
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: My Melodeon Building Project
« Reply #16 on: December 16, 2015, 03:18:47 AM »

If you want to try reed making, I would suggest doing it now while you are young(an assumption on my part since you mention college), before you get discouraged by experience, self-limiting behavior and the voice of others with different skill sets that may or may not have tried what you want to attempt... The design of these reed objects dates back to before electricity was being used commercially to rotate tool arbors. In the part of the world now called China and Cambodia, people figured out how to make free reeds about a thousand years ago. About eight hundred years later, when the Europeans finally saw one, they were inspired to make accordions, harmonicas, concertinas and pump organs.
Back when the use for hand tools was the only option, some humans developed good fine motor skills. You can still see this in accomplished musicians. Robots and computer controls maybe faster and more precise, but one misses the sense of accomplishment which comes from actually doing something. If you are planning to mass produce something efficiently, all this modern technology provides great opportunity. The development of precision hand working skills may be a longer feedback loop than most people can tolerate. A working reed assembly could actually be made with a hammer,a scraper, a bow drill.
Here is a link to one of the above mentioned Asian mouth organs, being made and played. This is a short 2 minute overview of the process. the second link is an in depth version. I recommend the longer version for anyone with a longer attention span or interest.
 
https://www.youtube.com/watch?v=MPNa1ZzOCWg

Here is a link that shows a more detailed construction of a Khan. The reed and reedplate are made from one piece of metal. The reed is formed by making a U shaped slot in the hammered piece of metal. Once source I read years ago said that the original free reeds were made from ancient coins hammered out this same way. This also works for reeds made from plant materials as used in early bagpipes and jaw harps.

https://www.youtube.com/watch?v=3x43gOK-c7U

I have one and enjoy playing it.
« Last Edit: December 16, 2015, 03:52:44 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: My Melodeon Building Project
« Reply #17 on: December 16, 2015, 08:31:31 AM »

Here is a link to one of the above mentioned Asian mouth organs, being made and played. This is a short 2 minute overview of the process. the second link is an in depth version. I recommend the longer version for anyone with a longer attention span or interest.
 
https://www.youtube.com/watch?v=MPNa1ZzOCWg

Here is a link that shows a more detailed construction of a Khan. The reed and reedplate are made from one piece of metal. The reed is formed by making a U shaped slot in the hammered piece of metal. Once source I read years ago said that the original free reeds were made from ancient coins hammered out this same way. This also works for reeds made from plant materials as used in early bagpipes and jaw harps.

https://www.youtube.com/watch?v=3x43gOK-c7U


Really interesting! Thanks for the Youtube links.

The Khan is a similar instrument to the Chinese Sheng which has developed into a modern, sophisticated instrument.
https://www.youtube.com/watch?v=nn45L7Sebjw

Reputedly, concertina inventor Charles Wheatstone saw and heard a sheng being played and was able to examine its construction, which is described in his original concertina patent of 1829.  Others carried these ideas further, eventually developing free-reed instruments such as the harmonium, harmonica, accordion and melodeon. We owe a great deal to these traditional Asian instruments!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: My Melodeon Building Project
« Reply #18 on: December 16, 2015, 09:05:09 AM »

The sheng seems a little more contemporary than the Khan based on the refined design of the ones which I have seen, but I haven't tracked down anything scholarly which confirms this.
Logged
I'm squeezin' and they're wheezin': old junker boxes

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: My Melodeon Building Project
« Reply #19 on: December 16, 2015, 01:23:04 PM »

If you want to try reed making, I would suggest doing it now while you are young(an assumption on my part since you mention college), before you get discouraged by experience, self-limiting behavior and the voice of others with different skill sets that may or may not have tried what you want to attempt...

May possibly be the best advice I've ever seen given.  Reed work would indeed be a daunting task, but it's been done before, so no reason anyone else couldn't do it.
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal