Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: My Melodeon Building Project  (Read 9605 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My Melodeon Building Project
« Reply #20 on: December 16, 2015, 01:54:17 PM »

If you want to try reed making it could be done entirely with hand tools. The plate can be cut from aluminium or dural plate using a a saw, drill, piercing saw and file, but your filing skills will have to be good! Reed tongues can be cut from spring steel strip using only a file, or files because they become blunt quite quickly. And you will need a hammer and anvil for peening the rivets.  If you manage to make one before you decide life is too short then hats off to you.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My Melodeon Building Project
« Reply #21 on: December 16, 2015, 02:00:24 PM »

... Theo's suggestion of recycling old PA reeds is a very time, materials and cost effective method. Grind off the rivet head from one reed per plate, punch it out, (label the reed frequency or note first, same time mark up the remaining reed) you can then shuffle the reeds along a note, match the one(s) you need to be the diatonic pair ...

Beating in mind your posing history BB I assume this is a wind up?

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stig Bubblecard

  • Member
  • *
  • Offline Offline
  • Posts: 36
  • synthesize cross-platform deliverables
Re: My Melodeon Building Project
« Reply #22 on: December 16, 2015, 04:05:16 PM »

Beating in mind your posing history BB I assume this is a wind up?
[/quote]

He has a posing history which includes beating??
Logged
Hohner Erika C/F, Hohner Liliput Bb/Eb, Hohner Preciosa Bb/Eb, Hohner 2915 G/C, Hohner 1930's A/D, Pariselle D/G 2012, Morse Ceili Concertina C/G, AC Norman G/D Concertina, Wolverton G/D Concertina

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My Melodeon Building Project
« Reply #23 on: December 16, 2015, 07:27:37 PM »

Arrgh! Autocorrect strikes again.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: My Melodeon Building Project
« Reply #24 on: December 16, 2015, 11:42:39 PM »

No posing or beating history that I'm aware of folks  :|bl (well other than the beating used when bringing pipes (but not so many reeds) into tune) and perhaps contrary to expectation not a wind up either - is it practical to tune half a row of accordion reeds up or down a tone then Theo and there be enough meat not to need longer tongues ? I guess with the treble side up the squeaky end but thought lower down the reeds differ more appreciably in length on the plates ??  Thank goodness my actual experience was qualified  ;D

Delighted you concur the making of these can be acheived by skill and simple handtools, would you think that in the pre factory machining days these would have been made by outworker families in their homes as was the practice for clock and watch parts ? looking at some of the early boxes in the Hohner book and elsewhere much of the casework fretting painting etc. and presumably bellows have that look too, then when you get into the flypressed corners, punched endplates impressed labelling era it was probably all factory made.

Nice to see someone on the left hand of melnets age curve thinking about having a try  :D


Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: My Melodeon Building Project
« Reply #25 on: December 16, 2015, 11:50:46 PM »

While it would be possible for a very skilled person to make a whole reed plate by hand, I'm sure the accordion industry was only able to develop with the use of press tools.  These are instruments of the industrial revolution.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: My Melodeon Building Project
« Reply #26 on: December 17, 2015, 12:10:28 AM »

Its amazing what the Black Forest folk produced in the long snowed up winters for the clock & watch trade Theo - and hand operated fly, drop or toggle presses were sometimes used for blanking out so its not totally unlikely.  Its a shame that the 'pre history' of the accordion trade is so sketchy  :(
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: My Melodeon Building Project
« Reply #27 on: December 17, 2015, 01:43:44 AM »

I have a foot operated press which is capable, with the right dies, of being used to form the reed plates, tongues, and the the metal embossed corners. A small press brake to bend to corners, although the light guage zinc corners could be bent by hand. Letter punches could also be used to emboss the logos. Treadle metal cutting lathes were available, I have one. I'm not familiar with non-electroplating processes for applying nickle to zinc, Otherwise, all the processes to make accordion could be done sans electricity but not without industrial efforts to make some of the tools used.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: My Melodeon Building Project
« Reply #28 on: December 17, 2015, 02:09:17 AM »

Ditto on the treadle lathe, although at a few years short of its century it now has a motor as well, Riley half shafts are long & tough and I'd had enough of one legged jogging :o 

I think drop hammers and small presses or shears, however crude, are probably amongst the most unappreciated of the pre factory production tools and did an enormous amount to bridge the gap between one at a time handwork and mechanised repeat work, such as early drive chain parts for example. Tinwork and zinc as you say are no problem and plating & lithography developed quickly when you think  of the volume of toys exported.

The few photos of the Hohner works I've seen show that belt driven presses & punches featured very heavily in the production and it appears they also electrified comparatively early, still trying to locate a German stationary steam enthusiast who is reputed to have some pre WW2 photos of the old steam plant coming out and the new going in.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #29 on: December 17, 2015, 12:11:09 PM »

I say well done, not an easy thing to do. What is the keyboard mechanism? Looks like a Hohner mech? Are you going to make the reed blocks or use 'reclaimed' ones? I'd be a bit worried about the weight of a box made from oak and I have no idea what it'll sound like. Oak is very dense and heavy so I guess you'll find out when you have finished it.

Im trying to make the box quite heavy, I prefer a heavier instrument myself, each to their own  ;).
Cheers
Mr hohner
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #30 on: December 17, 2015, 12:13:23 PM »

Box was varnished yesterday, looks a lovely dark brown!!! Will upload video so as you guys can share your views!!!
Cheers
Mr hohner
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #31 on: December 17, 2015, 05:16:47 PM »

Thanks for all the info!!! I really appreciate it. How do you stop the action going all the way in on the keyboard?
Cheers
Mr hohner
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: My Melodeon Building Project
« Reply #32 on: December 17, 2015, 06:20:39 PM »

some put a strip of wood between levers and frame near pivot point to limit travel
or pad under buttons
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: My Melodeon Building Project
« Reply #33 on: December 17, 2015, 06:25:57 PM »

some put a strip of wood between levers and frame near pivot point to limit travel
or pad under buttons
Thanks
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: My Melodeon Building Project
« Reply #35 on: December 17, 2015, 11:58:44 PM »

Hi Foma,

Some wonderful work there - the bass mechanism in particular.
Thank you for sharing this.

Regards,

ChrisS
Logged
Trying to learn enough magic to make my own melodeon.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: My Melodeon Building Project
« Reply #36 on: December 18, 2015, 09:14:45 AM »

If you have the time and inclination, definitely have a go at making reeds. Why not? Esp if it's a college project. I know I'd like to try it, just to see what can be learned. A back up plan then is Theo's..using old PA reeds. Altering the pitch a semitone up or down is relatively straight forward, as is soldering on little brass weights to lower the pitch of big reeds (or conversely removing the weight). I can let you have some old reeds if you are really stuck (you would need to clean them up etc) but you can get an old PA for a few pounds if you look hard enough on eBay. 0
(though you'd need to work out the reed plate/block sizes in advance I suppose...)
Keep up the good work!!!
« Last Edit: December 18, 2015, 10:10:00 AM by RogerThomas »
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: My Melodeon Building Project
« Reply #37 on: December 18, 2015, 11:32:11 AM »

Out of interest Melodeon, is the box project part of your college course?
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: My Melodeon Building Project
« Reply #38 on: December 18, 2015, 11:54:01 AM »

Ditto on the treadle lathe, although at a few years short of its century it now has a motor as well, Riley half shafts are long & tough and I'd had enough of one legged jogging :o 

"One legged dancers" was. I believe a term applied to the lasses in the potteries who worked similar machines to pug the clay...
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: My Melodeon Building Project
« Reply #39 on: December 19, 2015, 12:12:59 AM »

I'd not come across that Baz, while treadles & kick wheels are ancient, jogging machines have a shorter history. My exercise these days is more often jumping, mainly to conclusions, regardless of being adequately informed or not  :o

Looking forward to seeing the results Mr H - I tend to use clear Sadolin rather than varnish these days.

While still near the reed contributions, I wonder if any of our tuners would care to guesstimate and tell us how many reeds or sets of reeds they worked on before feeling competent / confident enough to 'go public' and tune others boxes.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal