Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Repairing Hohner wooden fingerboards  (Read 9111 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Repairing Hohner wooden fingerboards
« Reply #20 on: December 17, 2015, 09:46:49 PM »

Amazing what you learn here!  ;D
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repairing Hohner wooden fingerboards
« Reply #21 on: December 17, 2015, 09:53:43 PM »

I'm old enough to remember white wood kitchen units.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Repairing Hohner wooden fingerboards
« Reply #22 on: December 17, 2015, 10:47:19 PM »

In the white is also how violin makers refer to yet-to-be varnished (and loud) natural state instruments. Violin varnishes are often well kept secrets and some British makers import (often excellent) violins in various states from China and finish them off. Not a con, just another option for buyers of budget instruments.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Repairing Hohner wooden fingerboards
« Reply #23 on: December 17, 2015, 11:55:52 PM »

I remember the delight when a new whitewood unit replaced one of mums 'War Utility' plywood kitchen cupboards (from the early prefab period) Wind forward 45 years, the 'new' one has sagged and bent under a nominal kitchen load whereas its predecessor, relocated to the garage and subjected to an obscene amount of tool and fixings storage, remains straight and true - I suspect some sort of conclusion could be drawn..........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Repairing Hohner wooden fingerboards
« Reply #24 on: December 18, 2015, 11:01:03 AM »

Yep - that Plywood is vastly underrated - Boxwise most Hohners have battled on with it for eons while costalottis with their solid wood have suffered cracks and warping . the wood used has no affect on the sound anyway so may as well use the most practical stuff out there - Plywood
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Repairing Hohner wooden fingerboards
« Reply #25 on: December 18, 2015, 11:22:40 AM »

Yep - that Plywood is vastly underrated - Boxwise most Hohners have battled on with it for eons while costalottis with their solid wood have suffered cracks and warping . the wood used has no affect on the sound anyway so may as well use the most practical stuff out there - Plywood

Another vote for plywood; it's stable, strong and relatively cheap. My ancient Saltarelle is made of veneered ply and despite years of hard use (and abuse!) is as solid and straight as the day it was bought new.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #26 on: December 23, 2015, 09:27:51 PM »

I just finished repairing a damaged button board on a presswood Koch G/C after this thread had started. I photo documented the repair. I used hot hide glue to stabilize 9 cracks and install a missing segment. This type of glue only allows a about 90 seconds of working time before the glues cools down and is ineffective. I used this type of glue because it was used in the original construction, is superior to modern glues for certain applications, and is possible to remove without damage to the instrument if desired at a later date. I thought about why the button board structure failed. I concluded that failure was due to excess flexing of the wood during playing cycles.  Plywood retrofit substrate is a common repair strategy. I decided to try a different approach this time. I stiffened the assembly by adding three pine compression blocks in the routed out cavity at the outboard edge. I added one compression post at the central inner edge. Because the button board has to slide over the keys to install, there wasn't enough room for a block at the inner edge. The central outboard compression block provided the added benefit of internal support of the patch piece applied to the top of the button board between the keys. This was approach required the fabrication and fitting of the compression blocks and post, but negates the cutting of the 21 openings in the plywood substrate used in the more common repair strategy. The repaired button board is very stiff without noticeable weight added from repair materials.
« Last Edit: December 23, 2015, 09:33:13 PM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #27 on: December 23, 2015, 09:46:43 PM »

Here are more photos of the repair process. Someone had attached a thump strap using a #14 sheet metal screw. The original strap was attached with two #4 screws with a metal plate between the screw heads and the strap. This instrument still had the original mounting holes. I made wooden inserts out of pine and plugged the inappropriate holes. The original metal plate was tin plated steel,  and was missing on this box. I made a new one and attached the strap with screws similar to the missing original ones. The shortest screws I could find were too long for this application, so I made a fixture to hold the screws while I shortened them using a hand cranked grinder.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #28 on: December 23, 2015, 09:58:13 PM »

This instrument had another problem. One of the pallets wasn't sealing on the pallet board. This was due to a spring tension problem. Someone had replaced the spring with one made from a safety pin. I usually make replacement springs out of piano or guitar string wire depending on the gauge of wire required. I decided to try to modify the offending spring in place before disassembling the action to make and install a new one. I made a tool to disconnect the spring. I trimmed the spring and then bent it in place to create tension similar to the original springs still on the other keys.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #29 on: December 23, 2015, 10:04:34 PM »

This box still had the cotton string gasket which was leaking. I made a one piece foam gasket as a replacement. I try to use a color which comes close to the bellows frame color. The last photos shows the repaired button board on the reassembled instrument.
« Last Edit: December 24, 2015, 12:05:41 PM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Repairing Hohner wooden fingerboards
« Reply #30 on: December 23, 2015, 10:06:12 PM »

"The original metal plate" and "I made a new one". You make it sound so easy!  ;D
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Repairing Hohner wooden fingerboards
« Reply #31 on: December 23, 2015, 10:18:22 PM »

Thanks for posting that, most interesting. Did you use a piece of ply to fill in the missing web, or did you still have that piece?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #32 on: December 23, 2015, 10:20:54 PM »

"The original metal plate" and "I made a new one". You make it sound so easy!  ;D
The pictures tell the story. I used an original plate found on the bass strap attachment end for the pattern. The shape was cut out with a tool called a hand nibbler. The final shaping was done with a small file. The holes were punched before forming  the final shape so that less deformation of the metal occurred. A hand punch or an awl will work for this, but the punch makes less of a burr, which should be removed.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #33 on: December 23, 2015, 10:30:03 PM »

Thanks for posting that, most interesting. Did you use a piece of ply to fill in the missing web, or did you still have that piece?
No plywood was used in this repair. I was fortunate to find the missing piece stuck in the metal action near one of the lower pallets. That piece had fallen into the cavity in the button board and then migrated to the pallet board area where it became lodged. When I resort to using plywood for this type of repair, I like to use plywood made for model airplane construction. It is very high quality and comes thicknesses of down to about 1.5mm.
« Last Edit: December 24, 2015, 09:39:06 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Repairing Hohner wooden fingerboards
« Reply #34 on: December 24, 2015, 08:24:40 AM »

I used two matchsticks to fill the gap on my Club-Too one , glued in with PVA which I also used to glue the cracks in the others.. used a round file to complete the circle of the hole , more PVA underneath to make sure ..

Logged
Q: How do you cure MAD?
A: Buy more Boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #35 on: December 24, 2015, 09:52:59 AM »

I used two matchsticks to fill the gap on my Club-Too one , glued in with PVA which I also used to glue the cracks in the others.. used a round file to complete the circle of the hole , more PVA underneath to make sure ..

I often use pieces of pine cut from paint stirring paddles which are available free for the asking at a nearby hardware store. I used this type of wood for the compression blocks in the repair of Koch shown in previous posts in this thread. I have also used this wood for making new wooden bass and breather valves in the "growler boxes" of one row German style melodeons. I once made an extension piece for a treble board which had been damaged from shrinkage and cracking. The pine in these stirring paddles is a close match to the pine often used in the old prewar Saxony boxes. The wooden match sticks around here are usually made from a variety of poplar. When I glue cracks, such as the ones pictured in your repair, I use dental picks to remove any loose or dislodged wood fibers before glueing, to ensue a tighter fit. The hot hide glue I often use is not a good gap filler.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Repairing Hohner wooden fingerboards
« Reply #36 on: December 24, 2015, 10:14:33 AM »

I like to use plywood made for model airplane construction. It is very high quality and comes thicknesses of down to about 1.5mm.

Thinner, in fact; I use 1mm for casework repair reinforcement, and I have some 0.7mm and 0.5mm in my heap stock of materials. All these thicknesses were standard stock in my local model shop in the UK.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Repairing Hohner wooden fingerboards
« Reply #37 on: December 24, 2015, 11:33:25 AM »

My favourite source for thin strip wood is Costa Coffee (other coffee shops are available) their stirrers come in useful for all sorts of things.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Repairing Hohner wooden fingerboards
« Reply #38 on: December 24, 2015, 11:39:31 AM »

Sounds ideal Lester, I don`t like messing with plywood in such small pieces as bits pick off the top or bottom layers . those paint stirrers of P.V`s sound interesting .. PVA is a great gap filler and tough too ....

on a similar subject . Do Acorn do a wooden fingerboard for Coronas - very late German ones came with plastic , it`s OK but I prefer the "Classic-II" wood and celly ones

« Last Edit: December 24, 2015, 11:43:05 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Repairing Hohner wooden fingerboards
« Reply #39 on: December 25, 2015, 12:29:23 AM »

Glad you were not collecting stirrers in Westerham Lester - terrible start to Christmas  :(
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal