Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Repairing Hohner wooden fingerboards  (Read 9121 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Repairing Hohner wooden fingerboards
« Reply #40 on: December 25, 2015, 10:49:40 AM »

Chip forks from the chip shop are pretty good, too.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Repairing Hohner wooden fingerboards
« Reply #41 on: December 25, 2015, 01:02:25 PM »

Unless you get them from Rlck Steins chippy in Padstow..... They're wooden but shaped like the real thing.  (:)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Hasse

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 323
Re: Repairing Hohner wooden fingerboards
« Reply #42 on: December 26, 2015, 10:35:00 AM »

Of course depending on several factors, but one choice is to do nothing or as little as possible...

On of my old favorite C#/D boxes have a really rough appearance and it got a real worn down keyboard cover, but it simply suites the box as it is. For long I thought about replacing the missing wood, but the thing is that it just looks natural on that old worn out box. With this box it was just the right thing to do nothing or (in honesty) as little as possible to make it sound great and still save all signs of years of playing before my time enjoying box.

Well…  ::)
Logged
Sweden, Skåne

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Repairing Hohner wooden fingerboards
« Reply #43 on: December 28, 2015, 06:03:25 AM »

Of course depending on several factors, but one choice is to do nothing or as little as possible...

On of my old favorite C#/D boxes have a really rough appearance and it got a real worn down keyboard cover, but it simply suites the box as it is. For long I thought about replacing the missing wood, but the thing is that it just looks natural on that old worn out box. With this box it was just the right thing to do nothing or (in honesty) as little as possible to make it sound great and still save all signs of years of playing before my time enjoying box.

Well…  ::)

I had thought about doing nothing to the keyboard on the Koch described above, but there were structural issues and the deterioration of the keyboard was progressing. I decided to repair the cracks and replace the missing piece, and structurally improve the design shortcomings. I left the wear at the edges of the button holes as seen in the reassembled photo above.  I like the patina which comes only from extended usage. The wear patterns can provide insight into an instrument's past.

« Last Edit: June 18, 2016, 10:15:11 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal