Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: conversions, whole reedplates or seperate reeds?  (Read 2046 times)

0 Members and 1 Guest are viewing this topic.

jorden

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
conversions, whole reedplates or seperate reeds?
« on: December 22, 2015, 07:56:15 PM »

When people convert boxes (i.e. from C/F to D/G) do they a) unrivet all the reeds from the plates and make new combinations or b) move around whole reedplates with both reeds when possible and retune the rest?

Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: conversions, whole reedplates or seperate reeds?
« Reply #1 on: December 22, 2015, 08:29:07 PM »

When people convert boxes (i.e. from C/F to D/G) do they a) unrivet all the reeds from the plates and make new combinations or b) move around whole reedplates with both reeds when possible and retune the rest?

b)  :)

a) at a guess would just would not work

I have used the attached plan to successfully convert C/F Liliputs to D/G. It's a bit confusing as the 2.5 rows are split over two reed blocks so the pink reeds are the accidental row, the yellow the F or G row and the blue row the C or D row.

Liliput Plan

jorden

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
Re: conversions, whole reedplates or seperate reeds?
« Reply #2 on: December 22, 2015, 09:17:33 PM »

Ah, thanks, Lester. So sometimes you flip 'm over & most of the time one of the two reeds gets retuned 1 semitone. But what about for instance: nr. 18 C5/C5 on the C/F. You use that for D5/C#5 on the D/G. Am I correct in understanding that you bring one of the C5s up a whole tone to D? And for nr. 4 F#4/G#4 on the C/F -> F#4/D4 on the D/G, you lower the pitch of the G#4 to D4?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: conversions, whole reedplates or seperate reeds?
« Reply #3 on: December 22, 2015, 09:24:58 PM »

Ah, thanks, Lester. So sometimes you flip 'm over & most of the time one of the two reeds gets retuned 1 semitone. But what about for instance: nr. 18 C5/C5 on the C/F. You use that for D5/C#5 on the D/G. Am I correct in understanding that you bring one of the C5s up a whole tone to D? And for nr. 4 F#4/G#4 on the C/F -> F#4/D4 on the D/G, you lower the pitch of the G#4 to D4?

Requires skill and practice but mostly practice, a reed can go up a tone with care and tip loading will take a reed down a fair ways. But as I said practice, get a scrap piano accordion off eBay and ruin those reeds before setting forth.

jorden

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
Re: conversions, whole reedplates or seperate reeds?
« Reply #4 on: December 22, 2015, 10:27:12 PM »

Lots of old PAs here, so I might just do that...
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: conversions, whole reedplates or seperate reeds?
« Reply #5 on: December 22, 2015, 11:14:57 PM »

Lester and others, out of interest, with a view to changing a high G to an A, and vice versa (skilled hands, not mine) is a low reed safer to tune up a tone than a high reed? Not concerned because the person making the change will advise well, but curious none the less.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: conversions, whole reedplates or seperate reeds?
« Reply #6 on: December 23, 2015, 05:05:56 PM »

Funnily enough whilst watching accorbion repair videos on Youtu.be there was one of a man removing reed tongues, grinding up the rivets to fit (again) and rebuilding the plates.  I guess he was making diatonic plates from PA donors, but I don't speak whatever language it was in (probably south american Spanish).  The only bit I understood was as he progressively hammered down the rivet he constantly checked and aligned the tongue, twanging to demonstrate it was "libre" - free reeds, eh?

Rob.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: conversions, whole reedplates or seperate reeds?
« Reply #7 on: December 27, 2015, 02:32:57 AM »

Actually, I've just seen another technique on Youtu.be being employed to replace a tongue on a harmonica.  The rivet hole is tapped for a retaining screw and a plastic implement rather like a spanner used to hold the head of the reed to keep it straight whilst the screw is tightened.  Now that could be done with melodeon reeds!  Now all we need is a selection of the small sized Hohner PAs as donors for all the Clubs, 2815/2915 models and four-stops transplant requirements...

Rob.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: conversions, whole reedplates or seperate reeds?
« Reply #8 on: December 28, 2015, 05:06:20 AM »

Doing that makes sense on instruments with plates with a bunch of reeds on them, but I can tell you it is a pain in the ass.           I work on Bandoneons that have broken reeds and it takes about an hour to remove /find /file /rivet and tune a reed , so it is really a emergency measure only.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: conversions, whole reedplates or seperate reeds?
« Reply #9 on: December 28, 2015, 05:49:06 AM »

Ah, thanks, Lester. So sometimes you flip 'm over & most of the time one of the two reeds gets retuned 1 semitone. But what about for instance: nr. 18 C5/C5 on the C/F. You use that for D5/C#5 on the D/G. Am I correct in understanding that you bring one of the C5s up a whole tone to D? And for nr. 4 F#4/G#4 on the C/F -> F#4/D4 on the D/G, you lower the pitch of the G#4 to D4?

Requires skill and practice but mostly practice, a reed can go up a tone with care and tip loading will take a reed down a fair ways. But as I said practice, get a scrap piano accordion off eBay and ruin those reeds before setting forth.

I've several times obtained "custom" bisonoric pairs from a PA unisonoric pair by taking one side up a semitone and the other side down by the same amount. Thus an "A" PA reed, for example, will yield you a Bb/Ab pairing.

Graham
« Last Edit: December 28, 2015, 07:00:10 AM by GPS »
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: conversions, whole reedplates or seperate reeds?
« Reply #10 on: December 28, 2015, 02:33:40 PM »

Doing that makes sense on instruments with plates with a bunch of reeds on them, but I can tell you it is a pain in the ass.           I work on Bandoneons that have broken reeds and it takes about an hour to remove /find /file /rivet and tune a reed , so it is really a emergency measure only.

True, it brings the whole enterprise firmly into the "a mano" category.  I was really only thinking in terms of really awkward to replace reeds - and there always seems to be one in a change of layout.

Rob.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: conversions, whole reedplates or seperate reeds?
« Reply #11 on: December 28, 2015, 06:09:28 PM »

I've several times obtained "custom" bisonoric pairs from a PA unisonoric pair by taking one side up a semitone and the other side down by the same amount. Thus an "A" PA reed, for example, will yield you a Bb/Ab pairing.

This is by far the most practical method, I do this a lot as the Tex-Nex guys bust the same reeds over and over so I often run out of certain pre made reeds, or they have some odd Columbian tuning that has hard to find pairing.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal