Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Castagnari retuning  (Read 8995 times)

0 Members and 1 Guest are viewing this topic.

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: Castagnari retuning
« Reply #40 on: January 02, 2016, 04:37:30 PM »


One more observation which I forgot earlier:
I think that adjusting the tension on the reedblock mounting screws at each end can also help. Making sure they are snuggly (but not excessively) tightened down can have an effect on the wah-wah. It might be worth testing the effects of having the end screws (a) equally tensioned and (b) tensioned slightly differently at each end.
 :o

Spot-on Steve!

And similarly ..... make sure that if the reedblock slips into place underneath a retaining block (as in Hohners and many other makes), the fit there is also tight (though not overtight, as Steve says). The reedblock 'fit' beneath this retaining block often becomes loose over time ... Use tape/card/slither of veneer depending on how loose.

I'm getting round to a longer post on this but there's a lot of issues involved!

Mike R
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Castagnari retuning
« Reply #41 on: January 02, 2016, 04:45:45 PM »

Most things that I've started in this life, I have regretted, (a couple of those were marriages)  ;)
However it's not true of this thread, which is interesting.
I haven't encountered this wah wah effect, but what I have encountered, and I feel it may be related physically, is that stage in the run up of powerful engines, when at certains rev's, you get this sort of sympathetic vibration thing going on, and when the rev's increase it goes away. It's a resonance sort of thing, like Hardanger fiddles have sympathetis strings which resonate at certain frequencies, thus sounding.
More than that I cannot add.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Castagnari retuning
« Reply #42 on: January 03, 2016, 12:17:48 AM »

About 10 years ago a friend of mine (now deceased ) had a Castagnari "Studio"  ..a two row in d/g, retuned to a wetter sound by Nils Neilsen, for use in playing for Morris. He told me that Neilsen was very unwilling to do the job, as I think he preferred melodeons ,and accordions generally to be drier in sound, more like what would be called Swing tuning, but eventually was prevailed upon to do it. From what I can remember, afterwards it no longer sounded like a Castagnari, ...more Hohner like, which I think was what my friend wanted, but to my ears didn't sound "right".

So in answer to your question, it would be perfectly possible, as Theo says, the technique is the same no matter what the box, but whether it would be "successful" to your ears is of course subjective.
Nils never had any objection to tuning my Oakwood a bit wetter than normal (Dedic tuning, natch), if fact he said it really suited the box and was very happy with the sound. His only dislike of the system was the fact that his tuner couldn't do offset frequencies so he had to tune the flat reed to concert pitch against the tuner, then the sharp reed 2 beats sharp relative to this, then the flat reed 4 beats flat relative to the sharp reed, so more work than a normal concert/sharp setup. He did forget to tune the flat reed back down again once, when I took the box to morris practice everyone went "Urghh, what have you done to it?"

The "wah wah" effect is usually caused by reed block resonance, rather than a smooth tremolo the reeds tend to stick (phase-lock) together and then slip and relock with the phase having moved one cycle -- this is a well known problem with a pair of slightly mistuned electronic oscillators with insufficient isolation between them. The result is that instead of the volume varying smoothly it stays constant for longer than normal then dips down and back up rapidly as the slip happens. The solution is always to reduce the coupling between them, which is what the brace between the reed blocks helps to do -- when the reed blocks hit a resonance they effectively become much less stiff and the coupling increases, but this is usually narrow enough bandwidth only to affect one note badly.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Castagnari retuning
« Reply #43 on: January 03, 2016, 06:34:17 AM »

Thanks for the responses about wah-wah especially Steve, Malcolm and Ian. I have prepared a video showing the wah-wah effect and how a cross brace effectively eliminated it in this instance. I found an old Wilkinson’s Excelsior in BC that clearly demonstrates the issue. I show the effect playing the instrument and then how it isn’t present much on the air tuning table when testing the reedblock out of the instrument. I then added a substantial cross brace plate and retested it showing how it virtually eliminated the problem. I will try smaller bracing next to allow easier access to the reeds for tuning in situ.

Back to my comment about unsuccessfully trying to ‘dampen’ a Tommy, I ran into this wah-wah problem several years ago and couldn’t solve it at the time so I stopped and returned it to stock Castagnari dry. Looking at interior photos of the box, it didn’t come with cross bracing and I don’t thing I tried adding it so perhaps I would have had better luck adding the cross bracing.

Onwards and upwards.

  Scott

Wah-Wah video:
https://youtu.be/fbHIZMrQydo


Logged
too many boxes...please buy one, or two, or

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Castagnari retuning
« Reply #44 on: January 03, 2016, 07:54:39 AM »

The "wah wah" effect is usually caused by reed block resonance, rather than a smooth tremolo the reeds tend to stick (phase-lock) together and then slip and relock with the phase having moved one cycle -- this is a well known problem with a pair of slightly mistuned electronic oscillators with insufficient isolation between them. The result is that instead of the volume varying smoothly it stays constant for longer than normal then dips down and back up rapidly as the slip happens. The solution is always to reduce the coupling between them, which is what the brace between the reed blocks helps to do -- when the reed blocks hit a resonance they effectively become much less stiff and the coupling increases, but this is usually narrow enough bandwidth only to affect one note badly.

Thanks, Ian. I was hoping you would find this thread and make some comments.

I am aware of the phase lock effect and the need for reed block brace to minimise or hopefully eliminate the effect. However, I think that the wah-wah effect we've been discussing is somewhat more complex and there are other things going on, as I've hinted at in my earlier post. In particular I believe the optimum set-up of the reed tip gap can play a part in reducing the wah-wah. One piece of evidence for this is Theo's careful set up of the reeds on my Mory. A strong wah-wah was just about eliminated. Everything else in the instrument was unchanged, including the reed block brace which was in place before and after.


Thanks for the responses about wah-wah especially Steve, Malcolm and Ian. I have prepared a video showing the wah-wah effect and how a cross brace effectively eliminated it in this instance. I found an old Wilkinson’s Excelsior in BC that clearly demonstrates the issue. I show the effect playing the instrument and then how it isn’t present much on the air tuning table when testing the reedblock out of the instrument. I then added a substantial cross brace plate and retested it showing how it virtually eliminated the problem. I will try smaller bracing next to allow easier access to the reeds for tuning in situ.

Wah-Wah video:
https://youtu.be/fbHIZMrQydo

Excellent video Scott; thanks for making it!
A couple of comments:

1. Was there a reed block brace fitted prior to the plate-type brace which you demonstrate? I think the answer is no, but it may not be possible to see during the fleeting glimpse of the interior of the instrument in your video. If indeed 'no' then it is more understandable that the wah-wah effect occurred prior to your fitting of the plate-type brace. Perhaps a conventional, narrow strap brace would be as effective. As it is, with the plate-type brace there is a definite muffling of the sound discernible in the video at 3':10"

2. I see you have tuning software (Dirk's?) which allows you to see the harmonic spectrum spread of each reed. Very useful!
Is there any observable difference in the harmonic spread of wah-wah prone reeds compared with 'normal' reeds? I would be looking for a stronger fundamental and fewer/weaker harmonics in the wah-wah prone reeds.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Castagnari retuning
« Reply #45 on: January 03, 2016, 10:52:24 AM »

About 10 years ago a friend of mine (now deceased ) had a Castagnari "Studio"  ..a two row in d/g, retuned to a wetter sound by Nils Neilsen, for use in playing for Morris. He told me that Neilsen was very unwilling to do the job, as I think he preferred melodeons ,and accordions generally to be drier in sound, more like what would be called Swing tuning, but eventually was prevailed upon to do it. From what I can remember, afterwards it no longer sounded like a Castagnari, ...more Hohner like, which I think was what my friend wanted, but to my ears didn't sound "right".

So in answer to your question, it would be perfectly possible, as Theo says, the technique is the same no matter what the box, but whether it would be "successful" to your ears is of course subjective.
Nils never had any objection to tuning my Oakwood a bit wetter than normal (Dedic tuning, natch), if fact he said it really suited the box and was very happy with the sound. His only dislike of the system was the fact that his tuner couldn't do offset frequencies so he had to tune the flat reed to concert pitch against the tuner, then the sharp reed 2 beats sharp relative to this, then the flat reed 4 beats flat relative to the sharp reed, so more work than a normal concert/sharp setup. He did forget to tune the flat reed back down again once, when I took the box to morris practice everyone went "Urghh, what have you done to it?"

The "wah wah" effect is usually caused by reed block resonance, rather than a smooth tremolo the reeds tend to stick (phase-lock) together and then slip and relock with the phase having moved one cycle -- this is a well known problem with a pair of slightly mistuned electronic oscillators with insufficient isolation between them. The result is that instead of the volume varying smoothly it stays constant for longer than normal then dips down and back up rapidly as the slip happens. The solution is always to reduce the coupling between them, which is what the brace between the reed blocks helps to do -- when the reed blocks hit a resonance they effectively become much less stiff and the coupling increases, but this is usually narrow enough bandwidth only to affect one note badly.
Unfortunately as I mentioned My friend passed on a few years ago so I am unable to ask exactly what Nils' objection was, it may be that there were other reasons for being somewhat unwilling to take on the job, rather than simply an objection to my friends requirements.  I do remember Nils telling me that Castagnaris were "nice pieces of furniture" or words to that effect,!  so maybe he was not impressed with the box itself any way apparently he took some persuading, but nevertheless did the work, and my opinion was that the box never sounded as good afterwards.
Incidentally I have had several Hohners tuned by Neilson over the years, and they all came back with tie bars fitted to the reed blocks, usually made of a strip of plastic or aluminium strips.  Its some years now since I have had any contact with Nils, does anyone know if he is still around ??, I,m afraid I spent much time distracting him from his tuning work discussing vintage motors, particularly his gorgeous Red Daimler SP 250.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Castagnari retuning
« Reply #46 on: January 03, 2016, 05:39:30 PM »

I recall Nils as saying that Castagnaris were "furniture with reeds".  Anyone with a Daimler SP250 has credibility.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Castagnari retuning
« Reply #47 on: January 03, 2016, 06:55:35 PM »

I've noticed on a few old boxes I have worked on, the braces are often thick wire pushed into the reed block rather than metal strips screwed into place. Are these more or less effective than a strip screwed into place? I've used this approach with brass wire and it seems to work ok for me.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Castagnari retuning
« Reply #48 on: January 03, 2016, 10:54:05 PM »

I've noticed on a few old boxes I have worked on, the braces are often thick wire pushed into the reed block rather than metal strips screwed into place. Are these more or less effective than a strip screwed into place? I've used this approach with brass wire and it seems to work ok for me.
The exact form of the brace makes little difference, anything which couples the blocks together helps. But just to be clear, a brace doesn't make the resonance go away, it just shifts it in frequency by changing the effective mass and stiffness causing it -- if you're unlucky it'll just move to a different note :-(

But since the bandwidth of the resonance will be quite small it's bad luck anyway if it coincides with a note on a diatonic box, so the odds are that any change (including resetting the reeds) will make the problem go away. Or if you didn't have a problem, make it appear in the first place...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal