Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tightening bass springs?  (Read 972 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Tightening bass springs?
« on: January 02, 2016, 04:26:23 PM »

My recently acquired Preciosa, while overall in decent condition, has a couple of sticking bass buttons.  It feels more like the spring is tired and doesn't snap all the way back in place.  Can a bass spring be tightened, and if so, how?

Sorry searched previous threads to no avail.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Tightening bass springs?
« Reply #1 on: January 02, 2016, 04:40:36 PM »

I would investigate other causes first. Make sure all the pivot points are free moving. With the Liliput/Precisosa the buttons are connected to the mech by bent wire which needs to be carefully adjusted to make sure it does not bind at any pint in the button stroke. I have noticed some of the buttons/rods can rotate when pressed and this can make them bind up and not release cleanly.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Tightening bass springs?
« Reply #2 on: January 02, 2016, 04:53:26 PM »

Definitely spent some time studying what was going on.  Could be and probably am wrong but it didn't look like anything was catching.  It closes most of the way but leaves a small gap.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tightening bass springs?
« Reply #3 on: January 02, 2016, 05:02:17 PM »

Check the mechanism Grape. The Preciosa has a linkage which include the two high tonic reeds in the bass and the chord.  There has to be a small clearance where the levers interact. You can also get pallets that touch.  I agree that altering the spring tension is the last thing to try.  It's worth unhooking the spring(s) then operate the mechanism by hand and see if you can feel any resistance.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal