Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Thumb blister on right hand  (Read 5318 times)

0 Members and 1 Guest are viewing this topic.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Thumb blister on right hand
« Reply #20 on: January 04, 2016, 05:25:25 PM »

Ah.... Right, so much for my theory  ;D
I remember in past posts you've suggested using your thumb for chin end accidentals. I have tried but whenever I take my thumb off the edge and attempt this I feel I've lost control of the box.
I'm not sure how you manage to stabilise it - but obviously you do, sounds like another case of more than one way to skin a cat!
....and yet again just goes to prove we're all different.
Cheers
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Thumb blister on right hand
« Reply #21 on: January 04, 2016, 10:57:40 PM »

Thanks for all your good advice and now I realise that the blister could be an indicator to wider issues with my playing posture. I've attached a recent photo showing the position of my thumb on the Tommy. How do you think my hand/arm position looks in relation to the instrument, and to my body?

I get the impression my right hand looks cramped and I should use a longer strap to allow my arm to stretch out further to better position my right hand in relation to the keyboard. But, as was mentioned above, the Tommy is lightweight and I think it'd probably move around too much. I always thought I rested the box against my right leg, although the photo doesn't show that. Perhaps I need to do a video playing the Tommy and try to analyse what's going on with my posture.

Disclosure: I live with some neck pain due to deterioration around the cervical vertebrae which probably affects my playing posture etc, but I'm not ready to go under the knife just yet.

Cheers, Ian
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Thumb blister on right hand
« Reply #22 on: January 04, 2016, 11:05:42 PM »

The shape of the edge of the keyboard on the Tommy (like many boxes e.g. DBB) is not best designed for comfortable thumb placement, it's too narrow and the angle of the curve is wrong to give even pressure on the thumb. I pointed this out to Martyn Banks when he was designing my Oakwood, he shaped the edge to fit my thumb and it's far more comfortable as a consequence -- the front edge of the curve sticks out more and the rear edge less.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Thumb blister on right hand
« Reply #23 on: January 04, 2016, 11:28:01 PM »


I get the impression my right hand looks cramped and I should use a longer strap to allow my arm to stretch out further to better position my right hand in relation to the keyboard.

Longer strap would also allow the box to be lower where you can brace it against your leg. That will take some of the pressure off your thumb.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Thumb blister on right hand
« Reply #24 on: January 05, 2016, 04:06:58 AM »

The shape of the edge of the keyboard on the Tommy (like many boxes e.g. DBB) is not best designed for comfortable thumb placement, it's too narrow and the angle of the curve is wrong to give even pressure on the thumb. I pointed this out to Martyn Banks when he was designing my Oakwood, he shaped the edge to fit my thumb and it's far more comfortable as a consequence -- the front edge of the curve sticks out more and the rear edge less.

I concur completely with Ian and modified two Tommys with a keyboard extension at an angle like some of the old Hohner Club models. It was a great improvement in playability. The first one was made of poplar and functioned great but when playing the very lowest notes my thumb would reach the end and I needed to be careful to not 'fall off'. My second one was made of curly koa and I changed the design to flare outwards, eliminating the 'falling off the end' issue. Photos attached.
Logged
too many boxes...please buy one, or two, or

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Thumb blister on right hand
« Reply #25 on: January 05, 2016, 04:15:50 AM »

Here is the Koa extension photo showing the new flared ends.

These extensions were attached with strong double-sided tape so no permanent modification to the instrument.

Scott

Bellingersbuttonboxes.com
« Last Edit: January 05, 2016, 04:19:54 AM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

smiley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1021
  • Folk music: it's not as bad as it sounds
    • a few sound clips
Re: Thumb blister on right hand
« Reply #26 on: January 05, 2016, 06:27:26 AM »

Very interesting Scott. I'll PM you for details
Logged

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Thumb blister on right hand
« Reply #27 on: January 05, 2016, 11:10:50 AM »

The shape of the edge of the keyboard on the Tommy (like many boxes e.g. DBB) is not best designed for comfortable thumb placement, it's too narrow and the angle of the curve is wrong to give even pressure on the thumb. I pointed this out to Martyn Banks when he was designing my Oakwood, he shaped the edge to fit my thumb and it's far more comfortable as a consequence -- the front edge of the curve sticks out more and the rear edge less.

I concur completely with Ian and modified two Tommys with a keyboard extension at an angle like some of the old Hohner Club models. It was a great improvement in playability. The first one was made of poplar and functioned great but when playing the very lowest notes my thumb would reach the end and I needed to be careful to not 'fall off'. My second one was made of curly koa and I changed the design to flare outwards, eliminating the 'falling off the end' issue. Photos attached.

Yep, that's exactly the shape. Also the angle and less sharp edges make it comfortable played with a single strap standing up for morris. Don't know why box manufacturers don't make them like this in the first place, probably "we've always done it the old way" coupled with zero knowledge of or interest in ergonomics...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Thumb blister on right hand
« Reply #28 on: January 05, 2016, 12:03:47 PM »

Maybe they just think a small box is the same as a big box, except smaller - so they think everybody uses two straps.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

fc diato

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 146
Re: Thumb blister on right hand
« Reply #29 on: January 05, 2016, 02:27:08 PM »

Disclosure: I live with some neck pain due to deterioration around the cervical vertebrae which probably affects my playing posture etc, but I'm not ready to go under the knife just yet.

Have you thought of taking you and your box to a physiotherapist? I have cervical problems, doing physio, and last week took in my instrument.  She advised I find a position that does not unbalance the key muscle groups (ie: maintain "good posture"). I'm no expert, but on the picture, your right shoulder looks scrunched up (definitely unbalanced and not "good posture" in physio-speak), and potentially painful on the neck. Longer strap would help there too? 
Logged
fc diato

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Thumb blister on right hand
« Reply #30 on: January 05, 2016, 02:35:39 PM »

For anyone interested in making your own Tommy keyboard extension as shown in pictures above, keep reading. My method of making the extension requires having the instrument in hand. The important part is making the convex curve on the back side of the extension exactly match the concave curve on the Tommy keyboard. This allows the use of good double-sided tape to hold the extension on without modifying the Tommy at all making it a fully reversible operation.

The basic steps were:
Cut wood plank to slightly oversize
Using router table and/or hand plane with curved blade make the outer thumb profile on the extension
Using files or rasps, rough shape the back of the extension to a convex shape
Use successive grades of sandpaper taped/held directly to the Tommy's keyboard edge and stroke the extension back and forth along the edge until the extension shape exactly matches the Tommy (see photo)
Find double sided tape approximately the same thickness as the sandpaper
Apply tape to extension
Apply extension to Tommy

I used a fixture or piece of wood on top of the Tommy keyboard to keep the extension co-planar with the Tommy both while stroke sanding and during assembly as shown in photo. Yes, there is a Tommy hiding under the rags and tape:) My recollection was it took about 3 or 4 hours to make one. Not particularly hard but you do need to have a basic wood shop and patience.

      Scott
Scott Bellinger

BellingersButtonBoxes.com
« Last Edit: January 05, 2016, 02:38:42 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal