Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Spinning button  (Read 3317 times)

0 Members and 1 Guest are viewing this topic.

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Spinning button
« on: January 07, 2016, 09:42:06 PM »

The G/A button on my Lilium has decided to get a bit more lively. I'm assuming the threading in the plastic has gone; what's the best way to fix this? I have a variety of glues, but I assume it would be better to have a less-permanent fix as it's easier to remove the button from the plastic than the plastic from the metal rod? I have a small unopened bottle of liquid hide glue; would that be a reasonable choice?

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spinning button
« Reply #1 on: January 07, 2016, 10:03:18 PM »

If the button is spinning then you really need a new button.  Easily available from Charlie Marshall.
Hide glue is only effective on porous materials, not metal or plastic.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Spinning button
« Reply #2 on: January 08, 2016, 12:04:01 AM »

Ah I see, so it's spinning around the metal itself, rather than the metal spinning inside the plastic attached to the lever. I'll have a look to see if Charlie has any matching ones in stock!
Logged

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Spinning button
« Reply #3 on: January 09, 2016, 05:11:01 PM »

After some very speedy posting from Charlie, I now have a few spare buttons!
I do have another quick question: how do I go about removing the old one if I can't rotate it to extract it? Do I have to break it off in order to get some pliers around the screw shaft, or is there a better way?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Spinning button
« Reply #4 on: January 09, 2016, 05:22:55 PM »

Sorry to say it but I think that is the only way. Careful now.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spinning button
« Reply #5 on: January 09, 2016, 05:37:31 PM »

Put some masking tape over the button before breaking it off.   That will help to contain sharp fragments.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Spinning button
« Reply #6 on: January 09, 2016, 05:40:40 PM »

Great, thanks guys. I'll give that a go tomorrow!
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Spinning button
« Reply #7 on: January 09, 2016, 07:23:03 PM »

spinning button ? good name for a tune!

george ;)
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Spinning button
« Reply #8 on: January 11, 2016, 10:01:10 AM »


Hide glue is only effective on porous materials, not metal or plastic.
Sorry Theo, this is inaccurate. Hide glue will stick to non porous materials if correctly applied. It is sometimes applied to glass to create decorative chipping. When applied hot to prepped glass, the glue adheres so well, that as it contracts while cooling, can cause a piece of glass to flake off attached to glue. I would not use hide glue for adhering metal or plastic, but often use it for gluing shell and bone inlay on vintage musical instruments, as was done when they were originally constructed.  "superglue" is usually used by contemporary luthiers for this purpose.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spinning button
« Reply #9 on: January 11, 2016, 10:10:07 AM »

Thank you for the correction.  That's interesting.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Spinning button
« Reply #10 on: January 12, 2016, 11:39:48 AM »

Done, thanks for the advice guys. In the end I used my rotary tool to drill the plastic in a line through the middle, which allowed me to crush the metal disc in and grip the whole lot in some pliers and twist it out. First time I've put a button on without one of those tools Emmanuel had. I think I've got it aligned properly but the fresher felt is like an optical illusion when trying to judge position ;D


Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Spinning button
« Reply #11 on: January 13, 2016, 12:25:04 AM »

Nice careful bit of controlled demolition  :D
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Spinning button
« Reply #12 on: January 13, 2016, 04:22:38 AM »

...First time I've put a button on without one of those tools Emmanuel had....



Could you please describe or show a photo, of the tools Emmanuel had, I will probably never get to see them personally.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Spinning button
« Reply #13 on: January 13, 2016, 07:49:19 AM »

If it's the one I'm thinking of, it is basically a collet that grips the button and allows you to screw it onto the lever.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Spinning button
« Reply #14 on: January 13, 2016, 08:49:21 AM »

Fingers are just fine for removing and replacing the occasional button.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Spinning button
« Reply #15 on: January 13, 2016, 09:46:10 AM »

Yep, the finger-attached one seems to be holding up fine so far. It had a nice bedding-in with some vigorous morris tunes last night.

Here's what the button tool looks like for anyone interested:



I found it quite useful when doing a lot of buttons, though Emmanuel had two of them and one gripped slightly better than the other, so I imagine they can be quite variable.
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Spinning button
« Reply #16 on: January 14, 2016, 02:28:52 AM »

Thanks for the photo, this gives me the information i would need to machine a set.
Logged
I'm squeezin' and they're wheezin': old junker boxes

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Spinning button
« Reply #17 on: January 14, 2016, 03:11:14 AM »


Hide glue is only effective on porous materials, not metal or plastic.
Sorry Theo, this is inaccurate. Hide glue will stick to non porous materials if correctly applied. It is sometimes applied to glass to create decorative chipping. When applied hot to prepped glass, the glue adheres so well, that as it contracts while cooling, can cause a piece of glass to flake off attached to glue. I would not use hide glue for adhering metal or plastic, but often use it for gluing shell and bone inlay on vintage musical instruments, as was done when they were originally constructed.  "superglue" is usually used by contemporary luthiers for this purpose.
Glass is poruos under a microscope and if prepped with acidic cleaner it's even more so, I would think bone and shell would be also.
This would explain why hide glue sticks to it so well.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal