Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: Hide Glue Pot for Reed Wax?  (Read 12417 times)

0 Members and 1 Guest are viewing this topic.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hide Glue Pot for Reed Wax?
« Reply #20 on: January 11, 2016, 07:52:27 AM »

Trust me I'm a bookbinder. ;D
 Be very careful with PVA, I despair for the poor unfortunate restorers in the future who have to try and remove that crap that is not even water soluble.
There are several threads as to why why I am so passionate about glue.
 So many times have I been asked  to restore a family Bible only to find that some idiot has used PVA to "put it back together"  I have to say, "sorry it's not possible someone has ruined it. "And don't even start me on " sticky backed plastic" >:(

Book binding is NOT Melodeon repairing - who`d want to disassemble an old melodeon casing , at the extreme it`d be to replace the fondo if the ply had de-laminated or warped heavily and I`ve yet to see one which is unsavable , even so it`d have to be a pretty damn rare box to be worthwhile doing ..

the PVA I use is water soluble, I`m not the passionate aggressive glue officionado you are Nick and didn`t realise some weren't (though expect some builders type maybe) - Theo even put me on to BOOKBINDING PVA (which I`d not heard of) to glue a gusset .. I shudder to think what your opinion of Lester's tip of using Superglue to seal wood joints (edges Fondo etc) would be LOL

as for If you have a problem PM ME No need to get Nasty Nick , I`ve never had a problem with you and hopefully never will ..
« Last Edit: January 11, 2016, 08:07:25 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Hide Glue Pot for Reed Wax?
« Reply #21 on: January 11, 2016, 09:22:54 AM »

Here is a reply for you Edward. Unflavoured gelatin powder is functionly the same and works well for emergency hide glue. Hydrate it 1:1 with warm water and let sit for a few hours until gelatinous. Then heat in a doube boiler equiv. a tin can in a sauce pan is fine as long as additional water can't get into your glue container. Heat until the glue is approximately 145 degrees F. I  use a thermometer in the water bath. If using the glue for stressed structural gluing, don't exceed this temperature. For glueing on bellows tape a little higher is okay, but weakens the glue. It is preferable to dilute the glue slightly with hot water if a weaker bond is desired. If you leave the glue container uncovered while hot, some moisture will evaporate and the glue will form a skin which is inconvient. I keep my glue covered. Since the glue consists of animal materials, it will mould if left out at room temperature for several days, depending on your climate. If your mix smells bad or is mouldy, don't use and make a new batch. You can store the cool, hydrated glue in the refrigerator when not using for a few days. Hide glue is a very poor gap filler and requires a good fit. It also won't adhere well to dirty surfaces. The hot glue only sticks when it is hot. There is about a 90 second usable interval after it leaves the glue pot. If it cools to gel consistency it won't hold. If this happens, it is no big deal, you just clean up everything with warm water and try again. I really like it for regluing paper and cloth parts back on to old melodeons., also  gluing of wooden parts. If used properly, the wood fibers will fail before the glue does, and yet can be  disassembled with heat and moisture if desired. I will be using on your old 2row. Give it a go if you are so inclined., it is very useful material. Many casual hobbiyst may be intimidated by the proceedure, but it isn't too hard. Pregluing prep and fast actions are all it takes. Good luck!
« Last Edit: January 11, 2016, 09:40:27 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Hide Glue Pot for Reed Wax?
« Reply #22 on: January 11, 2016, 10:38:28 AM »

Sorry Adam, I didn't  express that very well. I meant if you have a problem with glue pm me.  :|bl
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hide Glue Pot for Reed Wax?
« Reply #23 on: January 11, 2016, 10:45:40 AM »

all this gluepot malarkey sounds like a lot of unnecessary outdated hassle to me - a bottle of PVA for the wood stuff,  Charlie Marshalls Excellent Reedwax sticks which work smoothly with a soldering iron for the waxing along with a hot glue gun for affixing pallets is a lot more practical IMO . though I can understand why Pro boxfettlers like Theo have a wax pot as it`s more economical ..

You are too quick to jump to conclusions Adam.  You have no idea how I go about waxing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hide Glue Pot for Reed Wax?
« Reply #24 on: January 11, 2016, 10:58:45 AM »

No Probs Nick :)  .. 8)

Theo , you`re right I don`t know how you do it , "like Theo" was more a reference to an example of someone who does it professionally rather than the likes of myself who fix up the occasional box for themselves to keep costs down -  I doubted somehow that you all used the Wax-stick and Soldering iron technique many of us occasional "Own-Box-fixers" use though
« Last Edit: January 11, 2016, 11:07:13 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Hide Glue Pot for Reed Wax?
« Reply #25 on: January 11, 2016, 10:59:43 AM »

I understand each of us has our glue preferences - mine is hide glue whenever possible with wood or fabric - but if I could sway the discussion back to my original post  :-[ I would like to know how everyone handles reed wax. (I bought a bulk block from Charlie.) I had hoped to use my electric glue pot. Should I use a double boiler instead? What is the optimum working temperature of reed wax?

Thanks, in advance, for your help,
Dave

PS "Glue Wars" are fine also. I always am ready to learn though I admit to being somewhat set in my ways after working with wood for over fifty years.
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hide Glue Pot for Reed Wax?
« Reply #26 on: January 11, 2016, 11:19:46 AM »

My guess Is the glue pot would not be hot enough.

From subsequent discussions I think this may be wrong. 
If you have a spare glue pot it might be best just to try it.   I don't know the temperature required, and it will vary slightly depending on the composition of the wax, but below 100C should be sufficient.  It needs to be just hot enough to be completely melted, but not any hotter.  Hight temperatures will damage the wax, increase fire risk, increase fume hazard and will be harder to apply because the wax will take longer to solidify.

One further word of warning:  Don't use the glue put if the glue vessel is made of iron or steel.  Melted beeswax reacts with iron and spoils it.
« Last Edit: January 11, 2016, 12:34:17 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Hide Glue Pot for Reed Wax?
« Reply #27 on: January 11, 2016, 11:22:02 AM »

" Glue Wars " I love it  ;D!  Dave with an electric pot you might have trouble controlling the temp. Unless it is adjustable. With a hot plate and double boiler you can go from stone cold to boiling, and with the water jacket, no chance of catching fire  :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Hide Glue Pot for Reed Wax?
« Reply #28 on: January 11, 2016, 11:25:32 AM »

Perfect, Theo and Nick. That is very helpful. Thanks.  ;)

By the way, I don't want anyone to think I was upset with the thread drift. Discussion is, generally, a good thing. Thanks to all for your thoughts and insights about various adhesives and their uses. 

Cheers,
Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Hide Glue Pot for Reed Wax?
« Reply #29 on: January 11, 2016, 12:16:41 PM »

Re reply # 23,
That wouldn't be leg waxing then Theo ?  >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: Hide Glue Pot for Reed Wax?
« Reply #30 on: January 11, 2016, 12:40:19 PM »

Trust me I'm a bookbinder. ;D
 Be very careful with PVA, I despair for the poor unfortunate restorers in the future who have to try and remove that crap that is not even water soluble.
There are several threads as to why why I am so passionate about glue.
 So many times have I been asked  to restore a family Bible only to find that some idiot has used PVA to "put it back together"  I have to say, "sorry it's not possible someone has ruined it. "And don't even start me on " sticky backed plastic" >:(

Book binding is NOT Melodeon repairing - who`d want to disassemble an old melodeon casing , at the extreme it`d be to replace the fondo if the ply had de-laminated or warped heavily and I`ve yet to see one which is unsavable , even so it`d have to be a pretty damn rare box to be worthwhile doing ..

the PVA I use is water soluble, I`m not the passionate aggressive glue officionado you are Nick and didn`t realise some weren't (though expect some builders type maybe) - Theo even put me on to BOOKBINDING PVA (which I`d not heard of) to glue a gusset .. I shudder to think what your opinion of Lester's tip of using Superglue to seal wood joints (edges Fondo etc) would be LOL

as for If you have a problem PM ME No need to get Nasty Nick , I`ve never had a problem with you and hopefully never will ..

 :o Nicks book binding does link into melodeon restoration in certain way, a personal attack on a fellow melnetter is not in the nature of Mel net, please don't do it  >:(
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Mike-T

  • Good talker
  • **
  • Offline Offline
  • Posts: 90
  • 1930s Hohner B C C#, D/GAcc Benny, 2.5 Beltuna
Re: Hide Glue Pot for Reed Wax?
« Reply #31 on: January 11, 2016, 12:42:33 PM »

That'd be damn painful using soldering iron method Nick   http://forum.melodeon.net/Smileys/default/grin.gif
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Hide Glue Pot for Reed Wax?
« Reply #32 on: January 11, 2016, 12:57:54 PM »

 Getting back to Dave's original post. Where on earth could you hide a glue pot for reed wax ?  :o
« Last Edit: January 11, 2016, 01:00:46 PM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hide Glue Pot for Reed Wax?
« Reply #33 on: January 11, 2016, 02:49:49 PM »

PV, that was a super reply to my query! Plain, simple and comprehensive is always best for nuggets like me, thank you very much.

"each of us has our glue preferences - mine is hide glue whenever possible with wood or fabric...........after working with wood for over fifty years."

So Mr up-fiddler, you thnk it's better than PVA for even wood? Have you tried Psuggmog Volbenz's gelatin recipe, and how would that compare, in your opinion, as I'm keen to try it out? Unflavoured gelatin powder is definitely on our next shopping list.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hide Glue Pot for Reed Wax?
« Reply #34 on: January 11, 2016, 03:18:38 PM »

I looked up bees wax as melting 80 to 85c so that should give the bottom end of the range.

On glues, to clarify - bookbinder's PVA can be removed with water after it's dried?

Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hide Glue Pot for Reed Wax?
« Reply #35 on: January 11, 2016, 03:25:33 PM »

So Mr up-fiddler, you thnk it's better than PVA for even wood? Have you tried Psuggmog Volbenz's gelatin recipe,

I think we`ve just found out what PVA stands for - Psuggmog Volbenz Adhesive . looks like it`s made of Gelatin after all ------  :o ::) :P ;D
Logged
Q: How do you cure MAD?
A: Buy more Boxes

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Hide Glue Pot for Reed Wax?
« Reply #36 on: January 11, 2016, 03:37:27 PM »

I use hide glue for wood whenever the joint is fit flush. If, however, there are small gaps to fill then I will opt for other adhesives depending on the size of the gap.

No, I haven't any experience with home-brewed gelatin glues. Sorry. I will say that hide glue stores well and the last glue crystals I bought were back in the late '80s. (I bought in bulk.) They still work fine and the joints are often stronger than the surrounding wood.

Cheers,
Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Hide Glue Pot for Reed Wax?
« Reply #37 on: January 11, 2016, 04:42:51 PM »

Slightly Off Topic, but this may be of use to someone.
I notice from several posts that some people have been having trouble when trying to make their own reed wax, in that there appears to be a problem getting rosin to dissolve in the hot wax, ....or vice versa.
looking at the various recipe for said wax, it seems that turpentine is included in many of them, so on the advice of a friend who makes his own polishes for restoring  furniture I obtained some powdered resin, which I then dissolved into Turpentine, ( Genuine, not White Spirit) which I left overnight to dissolve. next day I melted beeswax, and added the resulting sticky rosin/ turps gloop, and stirred whilst keeping the whole lot warm, result....it dissolved and mixed perfectly, with no lumps or granularity.
obviously some thought might be needed to calculate the exact ration of ingredients, but looking at the various recipes, there is so much variation that I doubt the exact proportions are that critical.!!   The resulting wax when cooled and hardened appears very similar if not identical to commercial waxes.  I have tested it on an old Saxony box that I keep for "Experiments", and so far it seems to function perfectly, obviously only time will tell how durable it is in the long term.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Hide Glue Pot for Reed Wax?
« Reply #38 on: January 11, 2016, 11:43:58 PM »

Just ran some wax & turps polish on Sunday using a recently revived kitchen kettle which had died for domestic purposes and operating via my trusty 'Reedwaxers Friend' (a 3KW mains variable PSU) all went well other than I need to educate the kill thermostat to operate just a little warmer as it cut out a shade low.  Next time I run some reed wax I'll try to establish a temperature range and post to one of the previous reedwax threads.

Re Henry's post, I'd not seen any of the tried and trusted reedwax recipes using turps to dissolve the resin, knowing how relatively little softens wax for polish purposes, this may well fume off if using hot iron method, in which case the need to remove this from the work area to avoid breathing in is very important. If not all evaporates this may leave the wax softer / wetter than a trad recipe, so the longer term life in your experimental box will be interesting.

Of these two aspects, there are still thousands of unburned Saxony boxes on which to experiment but you only have the one pair of lungs, on which bellows tape is little use  ;)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hide Glue Pot for Reed Wax?
« Reply #39 on: January 12, 2016, 08:36:14 AM »

I find that melting the rosin first, then adding the wax works very well.  It does need a little over 100c to melt the rosin,  so you can't use a water bath.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal