Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Hide Glue Pot for Reed Wax?  (Read 12418 times)

0 Members and 1 Guest are viewing this topic.

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Hide Glue Pot for Reed Wax?
« on: January 07, 2016, 10:46:34 PM »

Hey all.

I have an electric glue pot made for hide glue that I use for instrument repair. A question...Can I clean it out and use it for reed wax without burning my shop to the ground? I don't actually know the melting point of hide glue and how it compares to the flame point for reed wax. Anyone tried this before? Other thoughts will be welcomed also.

Thanks,
Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hide Glue Pot for Reed Wax?
« Reply #1 on: January 07, 2016, 11:08:50 PM »

My guess Is the glue pot would not be hot enough.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Hide Glue Pot for Reed Wax?
« Reply #2 on: January 08, 2016, 10:24:00 AM »

Thanks, Theo. I will rig up something else. My order goes out to Charlie Marshall today. My tuning table is almost done. I have scavenged two PAs for parts and next week I begin work on the two-row Concertone. Exciting stuff.

Thanks again,
Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Hide Glue Pot for Reed Wax?
« Reply #3 on: January 10, 2016, 08:54:21 AM »

I built a special glue pot which I take to music festivals and heat with a little gas fired hotplate. I also have an electric one which has never been filled with glue because I hydrate small batches and use fresh glue each day. I have  two ilttle vessels sitting in the electic glue pot. One contains hide glue and the other has reed wax in it. In this way, i have access to both as needed.
My glue pots are not commercially made and my main concern is maining optimum temp for the glue. I also keep the glue covered while hot to minimize evaporation and to prevent the formation of a skin on the hot glue. The melting temperature of the wax seems to depend on the amount of rosin mixed with the beeswax.
« Last Edit: January 10, 2016, 08:59:57 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

up-fiddler

  • Good talker
  • **
  • Offline Offline
  • Posts: 87
    • Fine Linen Literary Journal
Re: Hide Glue Pot for Reed Wax?
« Reply #4 on: January 10, 2016, 12:34:09 PM »

Thanks. Tomorrow I am going to the Goodwill store to find a hotplate. I wondered if a double boiler would work. (That's what I use for paraffin.) I assume the melting point of beeswax with the added rosin exceeds 212F. (100C)

So much to learn but that is the part I enjoy most. To be honest, without this forum and the useful info offered here I wouldn't have a clue where to begin. There are no repairmen within several hundred miles of where I live.

Thanks again,
Dave
Logged
d/g Tommy, c/f Hug & Co., c/f Corso, g/c/f Corona II, Weltmeister a/d/g, Lachenal 24 button anglo, Morse 30 button anglo, Star Chemnitzer, Lange Chemnitzer, too many fiddles and mandolins to list

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Hide Glue Pot for Reed Wax?
« Reply #5 on: January 10, 2016, 01:56:53 PM »

Hide  glue pots usually have a water jacket or double boiler. Placed on a hot plate it's quite easy to control the temp.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Hide Glue Pot for Reed Wax?
« Reply #6 on: January 10, 2016, 03:42:40 PM »

all this gluepot malarkey sounds like a lot of unnecessary outdated hassle to me - a bottle of PVA for the wood stuff,  Charlie Marshalls Excellent Reedwax sticks which work smoothly with a soldering iron for the waxing along with a hot glue gun for affixing pallets is a lot more practical IMO . though I can understand why Pro boxfettlers like Theo have a wax pot as it`s more economical ..
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hide Glue Pot for Reed Wax?
« Reply #7 on: January 10, 2016, 03:48:13 PM »

Hot hide glue is great stuff.  Cheap, long shelf life (years) in dry form, quick initial set, need only light clamping, compatible with similar glue in old boxes,  no staining of surfaces to be varnished, reversible with warmth and moisture. Not subject to creep like pva and aliphatic adhesives. Dried very hard so possibly better acoustic properties.  Sure it takes a few minutes to prepare, but it really is the bee's knees of woodworking glue.
« Last Edit: January 10, 2016, 03:50:22 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hide Glue Pot for Reed Wax?
« Reply #8 on: January 10, 2016, 04:44:32 PM »

I just cleaned off some pallets - the leather and the discs having been stuck on with hide glue late 1930s. The leather facings came off with some warm water, the glue underneath as good as the day it was put on. I just added a bit more to stick the new facing material on.
Easy. And as reversible next time.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hide Glue Pot for Reed Wax?
« Reply #9 on: January 10, 2016, 04:47:33 PM »

I have a small thermostatic electric hotplate on which I put a water bath for the glue pot. It has a lid, for in between times. Worked quite nicely.

Propose to use the hotplate also for wax, when I get around to playing with it.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hide Glue Pot for Reed Wax?
« Reply #10 on: January 10, 2016, 05:20:02 PM »

Hot hide glue is great stuff.  Cheap, long shelf life (years) in dry form, quick initial set, need only light clamping, compatible with similar glue in old boxes,  no staining of surfaces to be varnished, reversible with warmth and moisture. Not subject to creep like pva and aliphatic adhesives. Dried very hard so possibly better acoustic properties.  Sure it takes a few minutes to prepare, but it really is the bee's knees of woodworking glue.

Hear hear - twice! Wonderful stuff.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hide Glue Pot for Reed Wax?
« Reply #11 on: January 10, 2016, 05:42:35 PM »

Yes, I know that this post is drifting the thread a bit further, but..............
I'm now back in Egypt with my lovely little International 1-row, and it seems as if what I feared is starting to happen. Last night, I sat on my roof terrace and had a little squeeze for 20 minutes or so before carefully putting the baby back in it's custom made box. Alas, this morning I noticed a black bit of something on the floor when I went out to do my usual vacuuming, you guessed, it was a strip of bellows tape!!!!
As I was playing with the box resting on my right knee, I suppose that it's possible that I actually knocked it off with a bit of over zealous squeezing, nevertheless, it's off and I need to stick something back on. It's also coming adrift on another, unabused, place too which makes me wonder if my fears of the dry heat here damaging my treasure are becoming real, even though it's only about 25c degrees just now.

 
Obviously, I don't have any of this magic bellows tape stuff here, so after close inspection of the piece that's fallen off, it looks very like the cotton/linen mix that my wife's trouser belts are made of, and about the same weight too! (She doesn't use the belts [M&S] but keeps them as they might just come in handy, who knows?) Theo once suggested that if I was really stingy I could soak some suitable material in PVA and then use it as a sort of bellows tape. Should this manufactured tape be then affixed with hide glue? And, is hide glue the stuff which is made out of horse's hooves?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Hide Glue Pot for Reed Wax?
« Reply #12 on: January 10, 2016, 06:15:03 PM »

all this gluepot malarkey sounds like a lot of unnecessary outdated hassle to me - a bottle of PVA for the wood stuff,  Charlie Marshalls Excellent Reedwax sticks which work smoothly with a soldering iron for the waxing along with a hot glue gun for affixing pallets is a lot more practical IMO . though I can understand why Pro boxfettlers like Theo have a wax pot as it`s more economical ..

Rubbish! Hide glue has never been bettered. Now in 2016 there is a glue for every application, no matter what your situation.

Trust me I'm a bookbinder. ;D
 Be very careful with PVA, I despair for the poor unfortunate restorers in the future who have to try and remove that crap that is not even water soluble.
There are several threads as to  why I am so passionate about glue.
 So many times have I been asked  to restore a family Bible only to find that some idiot has used PVA to "put it back together"  I have to say, "sorry it's not possible someone has ruined it. "And don't even start me on " sticky backed plastic" >:(


If you have a problem PM ME
 passionate about glue
 
« Last Edit: January 11, 2016, 10:31:31 AM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hide Glue Pot for Reed Wax?
« Reply #13 on: January 10, 2016, 06:21:15 PM »

And, is hide glue the stuff which is made out of horse's hooves?

No - rabbit skin, usually.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hide Glue Pot for Reed Wax?
« Reply #14 on: January 10, 2016, 10:07:37 PM »

Have any of you old hands any suggestions as to a glue suitable for attaching my home-made bellows tape?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Hide Glue Pot for Reed Wax?
« Reply #15 on: January 10, 2016, 10:10:35 PM »

Have any of you old hands any suggestions as to a glue suitable for attaching my home-made bellows tape?

I use high grab PVA

http://www.axminster.co.uk/polyten-pva-glue-ax22032

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hide Glue Pot for Reed Wax?
« Reply #16 on: January 10, 2016, 10:36:57 PM »

Any pva will do, whatever is available.  I have successfully used the stuff sold for use in schools for sticking paper. It needs a little more care to hold it in place while it sets. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hide Glue Pot for Reed Wax?
« Reply #17 on: January 10, 2016, 10:44:59 PM »

Thanks to you professionals.
I can get PVA here, it's known as "Okey", but spelt Okay, if I remember correctly.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Hide Glue Pot for Reed Wax?
« Reply #18 on: January 10, 2016, 11:59:05 PM »

Strikes me that what you might have from the description Edward is passe partout (sp?) tape, which was used in the 20's and onward for cheapo framing of photo's behind glass, black paper (and have seen cloth) cloth tape with either a water activated gum, a self adhesive or no backing (i.e. use your own paste) Could very well have been used as bellows tape.

Might be worth washing it before regluing cos if it is the wetted glue it may self release again in the heat and humidity........

I'd be wary of penny pinching on this job, bargain hard and buy the PVA, cheap DIY crocodile hide glue can cost an arm and a leg if you get the recipe wrong early on :o

HTH

(BTW postings are nice and strong despite your being a pharoah distance away from us now)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hide Glue Pot for Reed Wax?
« Reply #19 on: January 11, 2016, 07:31:20 AM »

I can see the weave on the old length of tape, and it looks exactly the same as the Marksy's belt fabric, only it's rock-hard. It's also not reusable, as it has cracked along most of the length on the fold. I had thought of using some bias binding (?) as it is very strong and we have an excellent haberdashery shop very close by, but it might be a bit on the thick side. I'm going to see what he has in stock this morning.
Thanks anyway.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal