Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Painted Buttons !!  (Read 2509 times)

0 Members and 1 Guest are viewing this topic.

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Painted Buttons !!
« on: February 02, 2016, 07:36:07 PM »

Does anyone have any bright Ideas for removing badly applied black paint from white buttons on a Hohner treble mechanism, perhaps a suitable solvent, or detergent that will remove the paint without softening or otherwise damaging the plastic of the buttons !!.
it looks like ordinary gloss paint, but I've really no way of knowing what sort of paint it might be !!  I suppose as a last resort I could individually sand each button with wet or dry, then polish.
Many thanks.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Painted Buttons !!
« Reply #1 on: February 02, 2016, 08:34:47 PM »

Just play it lots Henry it'll wear off eventually ;-)  result over effort I guess 22 Euro for a complete new mechanism with buttons from CShop might be the way to go, you'd have to put your own pallets back on. Then of course there's loads of replacement buttons out there but that can end up expensive if your not care full. Good luck All the Best mory
« Last Edit: February 02, 2016, 08:37:49 PM by mory »
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Painted Buttons !!
« Reply #2 on: February 03, 2016, 08:37:09 AM »

I`d guess that 22 euro mech Is a Chinese one - it`s a quick fix but personally I`d sort the old one, the metal isn`t as good (bendier) and springs break , or they did on a Chinese Pokerwork I had .. compare the treb mechs from a German PW or Corona to a Chinese one some time .

as for the buttons - I seem to remember a post stating that really old ones aren`t a modern thermoplastic but something else I can`t remember the name of, best to find out before messing with solvents
« Last Edit: February 03, 2016, 08:39:39 AM by Adam-T »
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Painted Buttons !!
« Reply #3 on: February 03, 2016, 08:45:23 AM »

Or buy just the buttons from Charlie, but that is £40

http://www.cgmmusical.co.uk/CGM_Musical_Services/Hohner_Parts.html#67

ps Chinese springs are slightly more likely to break  (using the small sample set of boxes I've had to fix) but since you will have a complete set of spare springs from the old mech that is not a problem.

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Painted Buttons !!
« Reply #4 on: February 03, 2016, 09:13:02 AM »

Thanks Guys,
The original Mechanism is salvaged from a red pearloid Erica, which has been painted several colours in its life, and is now in a very sorry state !! and virtually falling apart. Its definitely German in origin, and has a Bell Accordians plaque on the rear so probably 6o's or 70's, the mech is sound and fully functional apart from the awful black painted buttons and some rust.
 I was thinking of using The D/G reeds and other  bits from it to refurbish another pokerwork carcase originally in C/C# for sale, and I,m looking at this problem mainly from an aesthetic point of view, black buttons on a black keyboard doesn't look attractive, and although I could get used to it, a future owner might be put off, particularly if they were a less experienced player who needed visual clues whilst playing.
I did look at Charlies Buttons !!! but that seems an expensive fix compared to a new mech from Cshop, even if an inferior one, but as Lester says, I'd have no shortage of springs for replacements.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Painted Buttons !!
« Reply #5 on: February 03, 2016, 10:00:25 AM »

When I had no box at the beginning of my playing I was as happy as anything to receive a rough old pokerwork, bent levers, detached pallets, rusty reeds, so on and so on. But I played and played that thing fixing it up as best as I could as I went. Now days (not so much since illness) every time I evaluate a box the resale value is always a large part of the assessment and it seems this is common for most of us. I guess it's the second hand market that we inhabit partly fuelled by the likes of Ebay etc ( and we certainly play our part) but I wonder how the musical joy, learning, experimentation, freedom, the whole gambit of emotion is compramised by the monetary considerations. Often it seems it's expected that we get a full refund if we sell and more often than not a profit, yet the box that gives the most freedom is often the one that is free of cash value. All the Best mory
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Painted Buttons !!
« Reply #6 on: February 03, 2016, 10:05:18 AM »

I think you just need to have a think and decide on your reasons for making a box out of this collection of bits. Is it for you?  For the satisfaction of bringing a collection of parts back to make a playing box,  and then for the fun of playing it?   Or is it for resale?  If its a bit of both you can always leave the buttons as they are for now, and change them later if you need to.

I suspect changing the buttons is the way to go, but there are a couple of things you could try. If they are modern thermoplastic buttons with a shiny finish it might be possible to peel the paint off.   A solvent might work, but most paints don't respond to solvents once the paint has hardened.   If it is cellulose paint then acetone would remove it, but test first to see if the solvent will affect the plastic.  Paint stripper eg Nitromors will almost certainly remove the paint, but is also quite likely to damage the button - test it first on one button.
« Last Edit: February 03, 2016, 10:09:40 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Painted Buttons !!
« Reply #7 on: February 03, 2016, 12:14:47 PM »

Mory, and Theo,
Thank you both for your advice and comments.!!.  I have been playing melodian for quite a few years, and at my age, (68 !!) I think it unlikely that I will be making any more major purchases by way of instruments. I have however, like most box players, over the years collected a large assortment of instruments in various states of disrepair, together with odd reeds,  hardware and parts with the intention of one day building my own "ultimate Melodian"
 I doubt now that this grand project is likely to happen, and so I thought I would assemble as many of these spare parts into playable instruments, and sell them and use the money to maintain my favourite two or three boxes, upgrading where needed.
 I would not call myself a professional restorer, or tuner, but have always done most of my own repairs and maintenance, which I enjoy, and hope to continue doing so. I have no doubts about my ability to assemble several perfectly playable boxes, even if they are not in pristine cosmetic condition. I would not However like to offer for sale something that I was not happy with, or would not be happy to play myself, hence this enquiry about tidying up the rather messily painted mechanism.
I think, my inclination is to go with the Chinese mech from Cshop, and thoroughly road test it before selling it, replacing any springs that do fail with ones from the older one.
Thank you all for your helpful advice.    Henry.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Painted Buttons !!
« Reply #8 on: February 03, 2016, 01:00:46 PM »

Just to give an idea of the spring issue, I bought a Chinese Pokerwork and broke three treble springs in three months - no more breakages since.  The box was getting a thrashing for morris about twice a week.  I now have an old beech bread board with screw holes for mounting the mech during repairs.

You might like to consider phoning Ivor Hyde to see if he has a usable treble mech.  He's not that far from you and always worth a visit.  I haven't seen him for a few years now, but his workshop always had a pile of junk boxes (though mostly PAs) not worth repair, but kept as donors.

I believe early Hohner buttons were casein, a plastic made from milk proteins.  Funnily enough I've always wanted black buttons for the PW, but didn't think painting would achieve the kind of finish to pull it off.

Rob.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Painted Buttons !!
« Reply #9 on: February 03, 2016, 01:34:42 PM »

I believe early Hohner buttons were casein, a plastic made from milk proteins. 

That`s the stuff - couldn`t remember the name . it goes very yellowy , my 30s Club Too has them
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Painted Buttons !!
« Reply #10 on: February 03, 2016, 02:22:39 PM »

Rob,  Good Idea about approaching Ivor Hyde, !! Ive seen his pile of old bits that he used to keep up in his workshop- he also had a shedful out the back as well !! I was under the impression that he was now retired and no longer taking on work, In fact a friend of mine in Sidmouth told me he was quite ill, I shall make enquiries, I met Ivor on several occasions particularly a couple of years ago when he tuned and set up my Bb/Eb Beaver, and a cracking job he made of it too !!.
Henry.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Painted Buttons !!
« Reply #11 on: February 03, 2016, 05:59:26 PM »

Sorry to hear that Ivor is unwell.  I'm sure a lot of the joy in life went out of him when his wife passed away, although his children rallied round.  It used to be one of life's little pleasures to pop in and see them (and their dog) when I was visiting my mother who lived for some years in the next village.

Rob.
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Painted Buttons !!
« Reply #12 on: February 04, 2016, 11:59:39 PM »

If the paint is laquer or shellac based, you can removed it with the appropriate solvent. Catalyzed or enamal not so. The casein plastic of the 1930s buttons, I have not tested with solvents, for vulnerability.  I have had some success removing paint from poorly prepared shiny plastic surfaces by using my thumbnail and various plastic and wooden homemade scrapers. If you try this makes sure that the scrapers are softer than the.plastic,. unless you plan to repaint. Another idea would be to use home made painted wooden replacement buttons. I have an old Master Supertone(probably made by Weidlich) which came with painted wooden buttons.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Painted Buttons !!
« Reply #13 on: February 05, 2016, 12:40:17 AM »

You could cautiously try one in some paint stripper or mild caustic soda solution Henry, I'd try the soda first as there is an organic content in the stripper, however I've not found it melting plastic bristled paintbrushes..........
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

mr hohner

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 189
  • K.BLAND Melodeons
Re: Painted Buttons !!
« Reply #14 on: February 12, 2016, 01:16:03 PM »

Might be worth asking pete grassby if he has a spare mec lying around... I got mine off him to build my own box recently.
 :||:
Logged
Castagnari Studio D/G, Serenelli D/G, Hohner Pokerwork D/G, Castagnari Lilly D/G , Sandpiper Dublin II G/C, Serenelli Silyvia G/Acc

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Painted Buttons !!
« Reply #15 on: February 12, 2016, 03:32:10 PM »

Thanks everyone for all your replies and helpful advice !  some careful scraping, fine sanding and final polishing has solved the problem of the cruddy paint,  a brushing with a brass brush cleaned of the rust, and last of the paint from the metalwork and its now ready for re-use.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal