Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Amateur Fettler Wannabe.... Where to begin?  (Read 1666 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Amateur Fettler Wannabe.... Where to begin?
« on: February 24, 2016, 03:25:01 AM »

As I become more and more obsessed with playable antiques, I realize a need to learn to do minor repairs.  I am not looking to tune reeds and enter the realm of the dark arts, but it would be great if I could fix the occasional sticking button or maybe one day even loose reeds.

My question is where to begin when I live in a place far from the nearest potential mentor?  Are there any good books or dvds on the subject? Good youtube videos anyone could point me in the direction of?

Any advice would be gratefully appreciated.
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #1 on: February 24, 2016, 07:36:45 AM »

You're reading it.  ;D
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #2 on: February 24, 2016, 07:41:27 AM »

What is your previous experience? Do you make/repair/tinker with anything else?  If you have some skills in taking anything apart and putting it back together then you should be a able to buy a cheap junker, take it apart diagnose its problems and begin to put it all back together in a better state than it was.  Boxes are so varied in their construction and defects that I don't believe it's possible to have a simple instruction book to work from.  You just need to keep your eyes open, observe what is there and be a bit of a detective. 

You definitely don't want to start learning on your own nice playing box.  Start with something where you have the possibility of learning from your mistakes.

There are some resources out there that are worth reading.
There is a website called accordion revival that is about piano boxes, but includes lots of material that is relevant.
A useful couple of bookes by Theirry Benetoux is quite useful though expensive, and Sounding out the Accordion by the same authour.

Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #3 on: February 24, 2016, 07:49:27 AM »

As Theo says, if you're of a reasonably practical inclination a lot of the job is common sense. Keep notes of how it looked before you took it apart, keep all the bits safely stored and labelled, and you should be fine.  Yes, there are some wrinkles and obvious things you'd never thought of until someone points them out, but most jobs don't require much in the way of specialist tools. Practice makes perfect - and bear in mind that a complicated job is just a lot of simple jobs strung together.........

Best of luck!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #4 on: February 24, 2016, 08:56:56 AM »

As Theo says, if you're of a reasonably practical inclination a lot of the job is common sense.
Graham

This is why I leave it to the experts...if, however, you'd like a Petrarchan sonnet composed about the finished article... :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #5 on: February 24, 2016, 02:42:59 PM »

..."a complicated job is just a lot of simple jobs strung together........."


A valuable nugget of wisdom in any enterprize..
Thanks.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #6 on: February 24, 2016, 04:59:20 PM »

..."a complicated job is just a lot of simple jobs strung together........."


A valuable nugget of wisdom in any enterprize..
Thanks.

It does help if you get them in the right order, though!  ;D

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #7 on: February 29, 2016, 09:53:48 AM »

..."a complicated job is just a lot of simple jobs strung together........."


A valuable nugget of wisdom in any enterprize..
Thanks.

It does help if you get them in the right order, though!  ;D

Cheers
Graham

For instance, if levers are under spring pressure or tension, relieve the pressure before undoing the retaining screws  :-[
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

AlexCJones

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
  • 3 row Hohner GCF 16 Bass
Re: Amateur Fettler Wannabe.... Where to begin?
« Reply #8 on: March 02, 2016, 03:33:38 AM »

I am much less experienced than most here.  I have been on a rather slow start as an amateur fettler for years.

I had to start when I bought some terrible but cheap Scholer concertinas.  In order to make them the least bit playable, I had to open them up and glue in extra little wooden blocks and scraps to limit the travel distance of the buttons, and to stop the button levers from being too wobbly.  I think there were other things I had to do too.

Then, it was buying a number of inexpensive other concertinas which were sold under different brands, but all the same instrument, and taking the best parts of each one to make two that were playable.

Sometimes, on eBay, you will see a diatonic accordion for cheap with the warning; "For display or parts--not playable."  I have purchased a few in the past that should have had that warning, but at least were cheap enough not to be much of a loss.  Those, I disassembled to learn about construction.

Before attempting repairs on a box that I actually play, I go to this forum first.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal