Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5 6 7 8 9   Go Down

Author Topic: Project box  (Read 38971 times)

0 Members and 1 Guest are viewing this topic.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Project box
« Reply #60 on: March 23, 2016, 08:29:33 AM »

Thanks gang, you learn a bit more everyday  (:)
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Project box
« Reply #61 on: March 23, 2016, 01:34:45 PM »

Especially what can be learned from Melnet  (:)

The surprising thing may be how durable the film is when undisturbed, century plus in reeds, several centuries in watch type instrument work.
Likewise the combs of musical box type devices, which I would argue are also free reeds, I have often wondered if these developed from someone 'twanging' a saw blade or spring on a benchtop and how much they influenced the invention of the air driven free reed.
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #62 on: March 23, 2016, 06:09:09 PM »

Today, I worked on the bass machines.  On Lester's advice, I removed the pins from the button rods and removed them from the top of the box.  As Malcolm pointed out, there is a bit of rust on the mechanism:



After working each rod with the nail buffer and finishing with some 600 grit carborundum paper, the rods don't look too bad:



With the rods removed and the spring tension relieved, the bass machine is easy to remove:



Okay, maybe "a bit of rust" is a somewhat optimistic description.  Taking care not to bend anything out of adjustment, I was able to get most of the rust off with a combination of the nail buffer, carborundum paper glued to wooden slats, and carborundum paper rolled around small skewers.  Then the whole thing went into the ultrasonic bath:



Since the machine is all steel, I used a somewhat more aggressive solution for the bath than the one I used for the reed plates, namely 1 tbsp Lemishine (which is mainly citric acid) and a drop of Dawn (dishwashing detergent) in 4 cups water.  Looks good to me.

I used the same process for the air button machine, suspending the button above the bath to avoid exposing the casein button to the acid in the bath:




Now, the machines get re-installed into the case:








Logged

penn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 574
Re: Project box
« Reply #63 on: March 23, 2016, 06:46:16 PM »

Thanks for detail and pictures Jef, that's exactly the sort of encouragement I need to do the same on my own project, which is similarly blighted with rust to the keyboard mechanisms.
Brilliant, thanks
Steve
Logged
Hohners, Dino Baffetti, Lilly, Benny + a lot of junk.

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #64 on: March 23, 2016, 10:08:05 PM »

Thanks for detail and pictures Jef, that's exactly the sort of encouragement I need to do the same on my own project, which is similarly blighted with rust to the keyboard mechanisms.
Brilliant, thanks
Steve

Glad to be an encouragement - it's really gratifying to see how well this old steel cleans up.  Do likewise and take pictures  :D

Now, here we are with pallets attached.  Having such easy access to the ends of the pallet rods makes this an easy job.  It would probably be worth removing the button rods for this reason alone.



I used steel wire nails as retaining pins.  Common wire nails have their own gauge standard - I needed #19, which have a nominal shank diameter of 1.04mm.  I found #19 flat head nails at my local hardware store in 1/2" length.  1/4" would be ideal, but they are easy to nip to size.  A pair of bent-nose pliers works well for inserting the pin:



And bending it over to lock it in place:



One down, seven to go...



A little delicate bending to adjust the action, compensating for the new, thicker pallet facing material, and voila!



Looking at that billiard-table green felt makes me wish I had obtained leather washers.  Perhaps I will change them out later, assuming I am  successful in getting the thing to make a pleasing sound...
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Project box
« Reply #65 on: March 23, 2016, 10:12:59 PM »

A small observation; I would have put more glue to fix the pallets. I have had a few occasions where I have used a small amount of glue and the pallets have ended up sliding along the rods as there was insufficient adhesion. As a  minimum I would try to slide the pallets to see if they are securely held.

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #66 on: March 23, 2016, 10:24:23 PM »

A small observation; I would have put more glue to fix the pallets. I have had a few occasions where I have used a small amount of glue and the pallets have ended up sliding along the rods as there was insufficient adhesion. As a  minimum I would try to slide the pallets to see if they are securely held.

Thanks, Lester.  I was indeed able to slide the Eb root pallet up and down.  :|bl  The others resisted my conservative attempts to budge them, but as I still have the glue gun out, I may as well add fill.  How much is enough?  Should I be covering the whole gap where the adhesive disc was?
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Project box
« Reply #67 on: March 23, 2016, 10:29:41 PM »

A small observation; I would have put more glue to fix the pallets. I have had a few occasions where I have used a small amount of glue and the pallets have ended up sliding along the rods as there was insufficient adhesion. As a  minimum I would try to slide the pallets to see if they are securely held.

Thanks, Lester.  I was indeed able to slide the Eb root pallet up and down.  :|bl  The others resisted my conservative attempts to budge them, but as I still have the glue gun out, I may as well add fill.  How much is enough?  Should I be covering the whole gap where the adhesive disc was?

I now aim to fill the whole of the notch in the lever

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #68 on: March 23, 2016, 10:45:19 PM »

Okay, not so pretty, but hopefully more secure:



Having done it both ways now, I can attest to the fact that it is way easier to glue the pallets on with the button arms out of the way.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Project box
« Reply #69 on: March 23, 2016, 10:54:37 PM »

You can probably make a neater and stronger job by removing the set glue and placing a larger bead in one go.  Looking at the picture I think you may need to allow more time for your glue gun to fully teach working temperature. I usually allow ten minutes warming up time, then the hot glue flows into a nice smooth pancake.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #70 on: March 23, 2016, 11:17:34 PM »

You can probably make a neater and stronger job by removing the set glue and placing a larger bead in one go.  Looking at the picture I think you may need to allow more time for your glue gun to fully teach working temperature. I usually allow ten minutes warming up time, then the hot glue flows into a nice smooth pancake.

Thanks, Theo.  I really appreciate the critical feedback.

The glue gun I have was probably _very_ inexpensive, is labelled "low temp" and has a 10 watt rating.  I'll admit, hot melt glue isn't something in my usual project arsenal.  Would it be worth buying a better glue gun and/or specific glue?  They are not particularly expensive.
Logged

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #71 on: March 23, 2016, 11:30:46 PM »

Here's what I get after about 10 minutes of warm up time:

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Project box
« Reply #72 on: March 24, 2016, 07:53:53 AM »

That looks much better.  I'd also suggest holding the nozzle very close to the work, possibly even touching to begin with to force the hot melt into good contact with the pallet on either side of the lever.  As you get towards the end of the flow you can start to move the nozzle away.  It does take practice to get a good bead of glue exactly where you want it. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Project box
« Reply #73 on: March 24, 2016, 08:08:07 AM »

Re previous comments about the blue on reed tongues. I've never had it removed by ultrasound cleaning. The reeds emerge like new with all the blue intact.

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Project box
« Reply #74 on: March 24, 2016, 01:55:19 PM »

The plot thickens  :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #75 on: March 28, 2016, 02:10:35 AM »

The glue gun I have was probably _very_ inexpensive, is labelled "low temp" and has a 10 watt rating.  I'll admit, hot melt glue isn't something in my usual project arsenal.  Would it be worth buying a better glue gun and/or specific glue?  They are not particularly expensive.

So I did a little research on glue guns.  For the posterity of the thread, there is indeed a difference.  The most common type is designated as "high temp" and has a working temperature of about 380 degrees F.  "Low temp" glue guns have a working temp generally between 170 and 250 degrees F.  From what I could surmise, low temp guns are normally only recommended when working with materials too fragile for high temp guns (Styrofoam and jewelry being the most oft cited examples) or when safety concerns dictate (for use by children, for instance).  There are glues specific to low temp guns, though many glues are all-purpose. 

Armed with this knowledge, I bought a $4 "high temp" gun to replace the $4 "low temp" gun I had been using.  After 10 minutes of warm up, using the same "725 all-temp" glue sticks, I got a much better result:



The glue flowed much better, was much less prone to producing small threads, and dried in a more translucent pool than before. 

So, if you are having trouble getting good results with your glue gun, check to make sure it is a "high temp" variety.
« Last Edit: March 28, 2016, 02:55:01 AM by Jef »
Logged

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #76 on: March 30, 2016, 04:58:59 AM »

Having figured out (I think) how to apply glue to pallets, I finished up the treble side today.  The machines had some surface rust, though not as bad as the bass mechanism.  The treble mechanism is too big for my little ultrasonic cleaner, so I was limited to what I could reach by hand:



I just put them back in my wife's vanity drawer after I'm done with them.  She'll never miss them. 

Here the machines are installed, and waiting for pallets:



And here are the pallets, re-faced and returned to their home:



Next up, valves.  I understand that Bostik solvent free clear contact adhesive is preferred by many of you, but it is unavailable in the US.  Any suggestions on an equivalent contact adhesive available in the States?  I have E6000, has anyone used this for valves?
« Last Edit: March 30, 2016, 05:02:37 AM by Jef »
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Project box
« Reply #77 on: March 30, 2016, 07:02:13 AM »

Looks good!

My only worry is that as you have refaced the pallets with thicker material this will have lowered the button height above the keyboard and may/will require you to adjust the mech (bend the individual rods) to reset the heights. On doing this it tends to change the angle the pallet lays on the soundboard thus causing leaks. I always refit the keyboard and reset the button height prior to gluing the pallets to overcome this possibility.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Project box
« Reply #78 on: March 30, 2016, 01:29:14 PM »

Does indeed look good, and I'll have the same issues to deal with soon on the Hohner Erika I bought on ebay.de
I did use my electric toothbrush on the buttons (with toothpaste) to good effect. I doesn't re-whiten them, but does get rid of patchy stains.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Jef

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
Re: Project box
« Reply #79 on: March 30, 2016, 05:24:07 PM »

My only worry is that as you have refaced the pallets with thicker material this will have lowered the button height above the keyboard and may/will require you to adjust the mech (bend the individual rods) to reset the heights. On doing this it tends to change the angle the pallet lays on the soundboard thus causing leaks. I always refit the keyboard and reset the button height prior to gluing the pallets to overcome this possibility.

Hmmm.  Good point.  I went ahead and adjusted the button height this morning - as the buttons all needed raising, I was able to make the bends with the pallets seated against the soundboard.  Of course I over-shot the adjustment on several and had to lower to correct, but hopefully I haven't created a big problem with leaks.



Also, the fingerboard itself is off square about a millimeter when mounted, creating the illusion that the chin-side buttons are higher.  I shimmed that side of the fingerboard with a strip of Olovisc to minimize the effect, but I'll need figure out what's going on at some point. 



Does indeed look good, and I'll have the same issues to deal with soon on the Hohner Erika I bought on ebay.de
I did use my electric toothbrush on the buttons (with toothpaste) to good effect. I doesn't re-whiten them, but does get rid of patchy stains.

That's a good tip.  Aside from being dirty, I think what I have going on with the treble buttons is white paint over casein plastic.  I'm not sure if the buttons were painted at the factory, or if the paint is an owner's attempt to improve things.  The bass buttons are not painted.  I'd love to find a way to remove what's left of the paint and leave the yellowed casein below, matching the patina on the bass buttons, but I'm skeptical about being able to do it.

For now I think I'll just leave the worn paint in the name of character.
Logged
Pages: 1 2 3 [4] 5 6 7 8 9   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal