Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Advice sought on fixing a sticking bass button  (Read 3674 times)

0 Members and 1 Guest are viewing this topic.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Advice sought on fixing a sticking bass button
« on: March 02, 2016, 02:40:35 AM »

So the c/g bass button on my Precious Preciosa sticks.  It does not appear to be the case that the button is getting stuck in the hole.  It is strange because if I kind of "snap" it rather than push it, or tap it very quick it doesn't stick.  Other days, i can play away on it for 30 minutes or so without problem annd then "hooooonk" as it sticks again.  The box is for the most part fine except this fault and minor tuning issues.  I am reasonably intelligent (not all will agree) and reasonably handy (don't tell my wife), and I would like to fix this myself.  If it would help, I could try to post a video, but just looking for initial thoughts as to cause, and how to fix it.  I have talked to the only fettler I could track down in Ohio, and he sounded EXPENSIVE and clueless.  The guy at the Button Box said he hates working on Preciosas and that it "would cost me."  I have considered sending the darned thing across the pond to Lester, Theo or the likes, but being that it is cf and not BbEb, and otherwise is more or less ok, seems like a lot of money just in shipping. So any thoughts?
Logged

WestOz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Advice sought on fixing a sticking bass button
« Reply #1 on: March 02, 2016, 03:26:42 AM »

I have had exactly this problem on a Preciosa, and it really frustrated me! I tried realigning/retensioning the pallet rods many times, to no avail - it was sporadic, and would reappear without any apparent reason. Finally, I put one drop of silicone lubricant on the pivot-rod, and I have had no further problem!
I anticipate a flurry of "never use lubricants" comments, however it worked, and silicone does not seem to attract dust/lint.
I think that the problem must be caused by wear on the pivot, and slight movements of this rod during playing cause extra friction on the rods, allowing them to stick in a slightly open position. "Snapping" the buttons overcomes this friction.
Logged
Castagnari Dony, DB Binci, Hohner Pressedwood,  Liliput, Preciosa,Octoput,etc.

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Advice sought on fixing a sticking bass button
« Reply #2 on: March 03, 2016, 02:00:59 PM »

Was kind of hoping for a bit more advice on this subject.  Does the community agree that I should try silcone like WestOz says?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Advice sought on fixing a sticking bass button
« Reply #3 on: March 03, 2016, 03:20:28 PM »

If you want to try a lubricant a dry one like graphite or powdered ptfe would be my first choice.

But before you do that it would increase your chance of succrssful fix if you can work out exactly where the jam is originating. If I this intermittent then that suggests to me that it might be related to the way your fingers are hitting the button.  Sometimes a slight sideways push can produce a jam.  The levers for the end buttons have quite an angle to them, and this makes them more prone to jamming caused by a bit of sideways push on the buttons. The two most likely places for the sticking are between the button and the hole it moves in, or between the pushrod and the lever. It could also be where the lever pivots on the axle.  A useful method is to release the spring then move the mechanism back and forth and feel for sticking. To free a button jamming in the hole rub a soft pencil lead round the inside of the hole.  For the metal parts powdered graphite mixed with a little alcohol and applied with a fine paintbrush.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Advice sought on fixing a sticking bass button
« Reply #4 on: March 11, 2016, 04:02:59 PM »

Well, tried the graphite in the button hole, and then on the mechanism itself to no avail.  Frustrated and after having fiddled and stared at it for an hour, I decided it looked as if the lever just wasn't at the right angle for it to close all the way.  Against my better judgement but frustrated, I applied a bit of brute force to the lever, bending it more closed, and behold problem seems solved! Does this count as my first accordion repair?
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Advice sought on fixing a sticking bass button
« Reply #5 on: March 11, 2016, 04:10:02 PM »

Sure does Frank. ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Advice sought on fixing a sticking bass button
« Reply #6 on: March 12, 2016, 10:21:25 AM »

Theo... On what form do you apply the PTFE?  I did buy a can of 'dry' PTFE lubricant having seem someone use the 3in1 version of it, which seemed to come out in a dry spray, but mine is made by the WD40 makers and seems to be propelled with a damp lubricant ... That does dry quickly but it wasn't what I was expecting...the bl***y thing says DRY on the side of the can.

Also... Tiniest tiniest bit of friction in the wrong place can cause malfunctions. PA bass machines can malfunction in this way and finding the correct spot to scrape can be like finding a needle in a haystack. Very satisfying when you do work it out but can but can be frustrating in the extreme.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Advice sought on fixing a sticking bass button
« Reply #7 on: March 12, 2016, 10:33:58 AM »

Yes the WD40 "dry" PTFE is not dry.   The one I use is Ambersil Dry ptfe
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Advice sought on fixing a sticking bass button
« Reply #8 on: March 12, 2016, 11:10:58 AM »

The b*gg*rs.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal