Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: REED PLATES AND REED Piano accordon HELP  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Ron Darticus

  • Member
  • *
  • Offline Offline
  • Posts: 25
REED PLATES AND REED Piano accordon HELP
« on: March 05, 2016, 10:44:38 PM »

Working on a couple Hohner Imperials Accordions a One and a IIA. The one needs a high G and High C reed plates with reeds and the IIA needs two reed plates and reeds also as the reeds bent in shipping. I'm new to this and try to fix things and sometimes get lucky but does anyone know where I can get the help I need? I am in the USA so this might be another problem. I thought I would try to straighten out the reeds but some say I can't. Maybe some use plates with reeds would do fine. I also need the r for the word Imperial.  Someone must have parts. See Pics. Thanks Ron
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: REED PLATES AND REED Piano accordon HELP
« Reply #1 on: March 05, 2016, 10:50:17 PM »

These small accordions use non-standard size reed plates.  The plates are narrower and the reed tongues are shorter than in full size accordions.  The only source of similar reeds is from old Hohner Imperials.  It is possible to file down full width reed plates to fit, but again the best sources is a contemporary Hohner piano accordion with zinc reed plates.  Fortunately these are reasonably easy to find on eBay.
« Last Edit: March 06, 2016, 07:31:46 AM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Ron Darticus

  • Member
  • *
  • Offline Offline
  • Posts: 25
Re: REED PLATES AND REED Piano accordon HELP
« Reply #2 on: March 05, 2016, 11:40:31 PM »

These small accordions use non-standard size reed plates.  The plates are narrower and the reed tongues are shorter than in full size accordions.  The only source of similar reeds is from old Hohner Imperials.  It us ossuary blue to file down full width reed plates to fit, but again the best sources is a contemporary Hohner piano accordion with zinc reed plates.  Fortunately these are reasonably easy to find on eBay.

Thanks I will key an eye open. Ron
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal