Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: What glue should I use to stick frames to wooden frame  (Read 1517 times)

0 Members and 1 Guest are viewing this topic.

NineOclock

  • Member
  • *
  • Offline Offline
  • Posts: 18
What glue should I use to stick frames to wooden frame
« on: March 06, 2016, 12:13:18 PM »

I am rebuilding my tuning table and have a new set of bellows without a frame and am unsure as to what glue I could/should use.
 
I did a search on this topic and came up with a number of items relating to gluing to plastic frames and some posts relating to different glues and I ended up being unsure as to what to use.

I have some old Homebase PVA glue and Loctite liquid hide glue which I was considering using but these previous posts have made me a little unsure as to their suitability.

Any suggestions as to what I should use, either the glues I have or something different.

Nigel
Logged
Nigel Sparkes
Salterelle Pasteurelle 3, Tara. Oakwood model 2, Hohner Morgane, Hohner One row 's in G,D & C. Pokerwork DG & GC, Corso CF, Eb/Bb, Castagnari Dony

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: What glue should I use to stick frames to wooden frame
« Reply #1 on: March 06, 2016, 12:23:26 PM »

Just to clarify; you're gluing them to plastic frames rather than wood? Titebond III is what we used on the Pariselle course for gluing them to wood. I'd have thought some form of epoxy might be better suited for plastic.
Logged

NineOclock

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: What glue should I use to stick frames to wooden frame
« Reply #2 on: March 06, 2016, 12:29:08 PM »

I am gluing to wood, the only topic I could find was about gluing to plastic frames.

Thanks for the response I will see if I can find that one locally, should be able to.
Logged
Nigel Sparkes
Salterelle Pasteurelle 3, Tara. Oakwood model 2, Hohner Morgane, Hohner One row 's in G,D & C. Pokerwork DG & GC, Corso CF, Eb/Bb, Castagnari Dony

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: What glue should I use to stick frames to wooden frame
« Reply #3 on: March 06, 2016, 12:41:00 PM »

I usually use Titebond II with wood frames and have never had any problems.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

NineOclock

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: What glue should I use to stick frames to wooden frame
« Reply #4 on: March 06, 2016, 01:16:07 PM »

I cant see any difference between Titebond 2 & 3 except that 3 is waterproof and 2 is water-resistant, 3 is also more expensive so I guess unless there is any other reason its what I can get.

Thanks
Nigel
Logged
Nigel Sparkes
Salterelle Pasteurelle 3, Tara. Oakwood model 2, Hohner Morgane, Hohner One row 's in G,D & C. Pokerwork DG & GC, Corso CF, Eb/Bb, Castagnari Dony

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: What glue should I use to stick frames to wooden frame
« Reply #5 on: March 06, 2016, 01:23:40 PM »

When glueing bellows to wooden frames I use normal woodworking PVA. This is what Emmanuel Pariselle uses on all his melodeon building sources so can't be very wrong  ;)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: What glue should I use to stick frames to wooden frame
« Reply #6 on: March 06, 2016, 02:18:11 PM »

Yes agree with Lester.  It's not a critical gluing job so just about any glue will do.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

NineOclock

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: What glue should I use to stick frames to wooden frame
« Reply #7 on: March 06, 2016, 02:38:22 PM »

Thanks all, as I have the PVA I think I will go with that.

As you say Theo its not the most hardened of environments to cope with on a tuning table,  am I correct in assuming that you would say the same if it was on a melodeon which can be exposed to all conditions(nearly)?

Nigel
Logged
Nigel Sparkes
Salterelle Pasteurelle 3, Tara. Oakwood model 2, Hohner Morgane, Hohner One row 's in G,D & C. Pokerwork DG & GC, Corso CF, Eb/Bb, Castagnari Dony

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: What glue should I use to stick frames to wooden frame
« Reply #8 on: March 06, 2016, 02:42:11 PM »

When glueing bellows to wooden frames I use normal woodworking PVA. This is what Emmanuel Pariselle uses on all his melodeon building sources so can't be very wrong  ;)

Ah I thought we used Titebond for it, but now you mention it I do recall a nondescript glue pot on the bellows bench. PVA sounds more likely then ;D
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: What glue should I use to stick frames to wooden frame
« Reply #9 on: March 07, 2016, 09:36:02 PM »

I use a form of PVA which dries clear and remains flexible as well as water soluble when dry. I learned of this glue from a cajun accordion builder. It workes well and I use a heated pallet knive(artist oil painting spatula) to remove old bellow when glued with this glue. I also apply it through a syringe to seal leaks. I have looked closely at the bellows join seam of many "hand made" cajun and quebec accordions. Most of them have glue squeeze out visible. The glue I prefer doesn't show, but also I meticulously clean the area after gluing. I have several cast iron rectangular plates which weigh 12.5 pounds each. Two side by side entirely cover the end of a typical one ore two row box. I use these for clamping pressure when gluing bellows to frames.
Logged
I'm squeezin' and they're wheezin': old junker boxes
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal