Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Borsini B/C  (Read 7177 times)

0 Members and 1 Guest are viewing this topic.

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Borsini B/C
« Reply #20 on: April 11, 2016, 11:38:09 PM »

Looks like about one more week on the Borsini restoration. Jeff is not happy with the original keyboard design and is seeing what he can do to optimize it while avoiding a full replacement.
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Borsini B/C
« Reply #21 on: April 21, 2016, 05:14:26 PM »

Finally got the Borsini LMMM back from Jeff. Turned out quite nice. Could use some additional work to chase down some tiny air leaks, but is perfectly playable now. I think the primary L and M are about 12 cents sharp of standard, and the other two Ms are flat and sharp of that. With my Neotech straps and an additional gel pad on the bass strap, the extra weight doesn't seem to be a problem for me.

Here's a polka on the instrument using the MMM and LMMM registers:

https://youtu.be/Hj3dqOR1oLs

Here's the bass setup:

Top to bottom, outside row on left

Push:

F G
C D

Pull:

G D
F A

Thirds are in all the chords. Two bass register choices, the second includes the lower reed.
« Last Edit: April 22, 2016, 02:26:05 AM by Michael Eskin »
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Borsini B/C
« Reply #22 on: April 22, 2016, 10:37:33 PM »

I think the primary L and M are about 12 cents sharp of standard, and the other two Ms are flat and sharp of that.

Tuned to A=443 then - so 1 Hz higher than Paolo Soprani's usual tuning of A=442 (to give it "the edge" over a Paolo maybe?) but still 1 Hz lower than my little 2-voice "pepperpot grille" Paolo that was made to be sold in Chicago. No wonder the latter cuts through and "rings out" over everything else, if you're not careful!  :o

Maybe not a "fashionable" sound these days, but it sure sounds good to me Michael.

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Borsini B/C
« Reply #23 on: April 23, 2016, 01:16:27 AM »

The registers are, from top to bottom:

L
LM
LMMM
MMM
M

I'm really loving playing mostly Kerry and Sliabh Luachra tunes on it. 
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Borsini B/C
« Reply #24 on: April 23, 2016, 08:13:47 AM »

I like the sound of it. Not quite in the Shand Morino league  for so called wet tuning but definitely somewhere in that direction

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Re: Borsini B/C
« Reply #25 on: April 23, 2016, 03:08:25 PM »

Lovely sounding box! Any idea of the name of that polka?

Thanks,
Baron
Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Borsini B/C
« Reply #26 on: April 23, 2016, 04:13:11 PM »

X:13776
T:The Ballinahulla
R:polka
M:2/4
L:1/8
K:Gmaj
|: A |B[A/c/]B/ AG | EG GA | BA/B/ AG | AB d>e |
dB AG | EG GA | BA/B/ dB |[1 AG G :|[2 AG G2 ||
g>e dB | dB AG | gg/e/ dB | A/B/c d2 |
g>e dB | dB AG | BA/B/ dB |[1 AG G2 :|[2 AG G |]
« Last Edit: April 23, 2016, 04:14:54 PM by Michael Eskin »
Logged

Baron Collins-Hill

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 232
  • Maine, USA
Re: Borsini B/C
« Reply #27 on: April 23, 2016, 07:35:09 PM »

Lovely, thanks!

Baron
Logged
D/G/Acc Castagnari Big 18 (full Dutch reversals)
Mandolin & Tenor Guitarist: Velocipede
Free Online Mandolin Lessons: MandoLessons

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Borsini B/C
« Reply #28 on: April 24, 2016, 11:51:25 PM »

.. Jeff is not happy with the original keyboard design and is seeing what he can do to optimize it while avoiding a full replacement.

What was the problem?

Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Borsini B/C
« Reply #29 on: April 25, 2016, 05:00:31 PM »

Didn't say exactly other than it was a "very old design" for a Borsini box. Seems fine to me.
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Borsini B/C
« Reply #30 on: April 29, 2016, 07:31:36 PM »

Now that I've had it for a week or so, bringing it back to Jeff to address a few minor issues. Found a fairly obvious air leak in the bellows gasket at one corner and have a few notes that have some odd valve transition startup growling at low pressures. Other than that, I'm really enjoying playing it. A little more TLC and it will be ready for playing out.
Logged

Michael Eskin

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 547
    • AppCordions
Re: Borsini B/C
« Reply #31 on: May 23, 2016, 06:09:17 AM »

Just got it back from round two of fixes. New treble side bellows gasket, multiple valve replacements to fix some transition sounds, overall much better.

While testing it, we noticed that the bass register switch mechanism, which had been working just fine, stopped working at all. Opening up the instrument, it was clear that the bass reed slide mechanism had gotten really tight, nearly frozen, and the push rods for the register switches had bent the cam that ultimately, through a series of levers moved the bass reed selector slide.

Since the instrument is quite heavy, and the bass arrangement is a bit bizarre anyway, the 3rds were all present, and I don't play the basses much anyway in sessions, I decided to just have the bass reeds removed for now to lighten the left side by a pound. We made an wooden plate to replace the reeds that goes against the gasket that the bass reed blocks go up against to reduce any possibility of air leaks in this area. It's retained by the same clamping systems as the reed blocks. The removed blocks are safely stored in a cool, dry place.

Here's how it sounds now with all the reeds going:

https://youtu.be/lopXxFC1XMk


With the lighter left size, the enlarged air button hole, the new bellows gasket, keyboard fixes, and reed/valve improvements, the instrument is really fun to play.  Well worth the additional expense to fix up to this level. 

It could be further improved with modifications or replacement of the keyboard mechanism with something a bit more modern in design, and a full reed re-wax and new valves, but I think it will absolutely serve my needs for it in its current playing state for a long time.
« Last Edit: May 25, 2016, 05:37:49 PM by Michael Eskin »
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal