Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Is it just me....  (Read 1283 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Is it just me....
« on: March 11, 2016, 12:13:05 PM »

..... finding some difficulty getting low bass reeds to speak on the tuning bellows? They were all working OK in the box, but now they're out only a couple of them will speak at all, and that somewhat reluctantly. All I've done to them is to remove the old valves and clean off the old wax and valve adhesive. I'm inclined, as they weren't far out before removal, to revalve and reinstall them and tickle up the tuning with them back in the instrument.Any suggestions?

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Is it just me....
« Reply #1 on: March 11, 2016, 12:26:13 PM »

You have answered your own question.  Final tuning needs to be done in the instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Is it just me....
« Reply #2 on: March 11, 2016, 12:27:55 PM »

In an unaccustomed flash of common sense I think I've just answered my own question; I fitted the new valves, tried again and Robert was my mother's sister's husband!  I've just done the one plate so far;with luck it'll work for the rest.

 ::)
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Is it just me....
« Reply #3 on: March 11, 2016, 12:33:37 PM »

Cross-posted! Thanks Theo - yes I do check and make final adjustments with the reeds in the instrument; it was just that I'd done the initial work on all the other reeds on the tuning table before revalving and I was just continuing in the same vein with these last 4 plates. Sorted now; thanks!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Is it just me....
« Reply #4 on: March 11, 2016, 04:21:45 PM »

If you are trying to sound the reeds without valves that would prevent them working without a great deal of air!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Is it just me....
« Reply #5 on: March 11, 2016, 05:06:44 PM »

If you are trying to sound the reeds without valves that would prevent them working without a great deal of air!

Exactly - that's what I meant by "an unaccustomed flash of common sense"! That very reason suddenly hit me as I was fitting the valves.

Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Is it just me....
« Reply #6 on: March 11, 2016, 06:08:09 PM »

..... finding some difficulty getting low bass reeds to speak on the tuning bellows? They were all working OK in the box, but now they're out only a couple of them will speak at all, and that somewhat reluctantly.

Any suggestions?

For tuning the bass/chords reeds, I usually do all the work with the reed blocks in situ in the instrument. I have a set of tuning bellows with an upper opening sufficiently large to enable me to put the entire LH end on the bellows and sound the reeds that way. I find that the reed blocks are then positioned well inside the cavity of the tuning bellows, away from the bellows folds which means that there is a negligible discrepancy between the pitch as sounded on the tuning bellows and the pitch as sounded in the assembled instrument. It also means that the lowest bass reeds are able to speak as normal, without encountering the problem you describe.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal