Don't mean to be rude but you guys seem to have a thing about gap filling glues - all that's required here is to apply an ordinary wood glue into the split and clamp it - the visible surface of the repair has a finish on it so excess glue will just wipe off, the other surface will need a bit of care with a damp cloth to wipe it clean.
Mixing saw dust with glue is a bodge (a) it weakens the glue joint (b) the particles of endgrain in the sawdust together with the glue will be visible as a dark line which will stand out like a sore thumb. If any splinters have come off the surface then a small amount of filler can be used.